Commit 442543d7 authored by Xenia Ragiadakou's avatar Xenia Ragiadakou Committed by Greg Kroah-Hartman

staging: rtl8192u: fix function arguments position in r819xU_phy.c

This patch fixes the alignment of function arguments to make
it uniform across the driver trying to keep the line size
below 80 characters.
Signed-off-by: default avatarXenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent ceb56597
......@@ -80,7 +80,8 @@ u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath)
* return: none
* notice:
* ****************************************************************************/
void rtl8192_setBBreg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData)
void rtl8192_setBBreg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask,
u32 dwData)
{
u32 OriginalValue, BitShift, NewValue;
......@@ -114,9 +115,12 @@ u32 rtl8192_QueryBBReg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask)
return Ret;
}
static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 Offset);
static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
u32 Offset);
static void phy_FwRFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data);
static void phy_FwRFSerialWrite(struct net_device *dev,
RF90_RADIO_PATH_E eRFPath, u32 Offset,
u32 Data);
/******************************************************************************
*function: This function read register from RF chip
......@@ -127,7 +131,8 @@ static void phy_FwRFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E
* return: u32 readback value
* notice: There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information.
* ****************************************************************************/
u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 Offset)
u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
u32 Offset)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 ret = 0;
......@@ -208,7 +213,8 @@ u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
* Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf)
*------------------------------------------------------------------
* ****************************************************************************/
void rtl8192_phy_RFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data)
void rtl8192_phy_RFSerialWrite(struct net_device *dev,
RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 DataAndAddr = 0, NewOffset = 0;
......@@ -269,7 +275,8 @@ void rtl8192_phy_RFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E eRFPath
* return: none
* notice:
* ****************************************************************************/
void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data)
void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
u32 RegAddr, u32 BitMask, u32 Data)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 Original_Value, BitShift, New_Value;
......@@ -313,7 +320,8 @@ void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32
* return: u32 Data //the readback register value
* notice:
* ****************************************************************************/
u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask)
u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
u32 RegAddr, u32 BitMask)
{
u32 Original_Value, Readback_Value, BitShift;
struct r8192_priv *priv = ieee80211_priv(dev);
......@@ -341,11 +349,8 @@ u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u3
* return: none
* notice:
* ***************************************************************************/
static u32
phy_FwRFSerialRead(
struct net_device *dev,
RF90_RADIO_PATH_E eRFPath,
u32 Offset )
static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
u32 Offset)
{
u32 retValue = 0;
u32 Data = 0;
......@@ -399,12 +404,8 @@ phy_FwRFSerialRead(
* return: none
* notice:
* ***************************************************************************/
static void
phy_FwRFSerialWrite(
struct net_device *dev,
RF90_RADIO_PATH_E eRFPath,
u32 Offset,
u32 Data )
static void phy_FwRFSerialWrite(struct net_device *dev,
RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data)
{
u8 time = 0;
u32 tmp;
......@@ -642,7 +643,8 @@ void rtl8192_InitBBRFRegDef(struct net_device *dev)
* return: return whether BB and RF is ok(0:OK; 1:Fail)
* notice: This function may be removed in the ASIC
* ***************************************************************************/
u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath)
u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock,
RF90_RADIO_PATH_E eRFPath)
{
u8 ret = 0;
u32 i, CheckTimes = 4, dwRegRead = 0;
......@@ -883,7 +885,8 @@ void rtl8192_phy_updateInitGain(struct net_device *dev)
* return: return code show if RF configuration is successful(0:pass, 1:fail)
* Note: Delay may be required for RF configuration
* ***************************************************************************/
u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, RF90_RADIO_PATH_E eRFPath)
u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
RF90_RADIO_PATH_E eRFPath)
{
int i;
......@@ -989,7 +992,8 @@ void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
* return: none
* Note:
* ***************************************************************************/
bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState)
bool rtl8192_SetRFPowerState(struct net_device *dev,
RT_RF_POWER_STATE eRFPowerState)
{
bool bResult = true;
struct r8192_priv *priv = ieee80211_priv(dev);
......@@ -1112,15 +1116,9 @@ bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerS
* return: true if finished, false otherwise
* Note:
* ************************************************************************************/
u8 rtl8192_phy_SetSwChnlCmdArray(
SwChnlCmd *CmdTable,
u32 CmdTableIdx,
u32 CmdTableSz,
SwChnlCmdID CmdID,
u32 Para1,
u32 Para2,
u32 msDelay
)
u8 rtl8192_phy_SetSwChnlCmdArray(SwChnlCmd *CmdTable, u32 CmdTableIdx,
u32 CmdTableSz, SwChnlCmdID CmdID, u32 Para1,
u32 Para2, u32 msDelay)
{
SwChnlCmd *pCmd;
......@@ -1153,7 +1151,8 @@ u8 rtl8192_phy_SetSwChnlCmdArray(
* return: true if finished, false otherwise
* Note: Wait for simpler function to replace it //wb
* ***************************************************************************/
u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u8 *step, u32 *delay)
u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage,
u8 *step, u32 *delay)
{
struct r8192_priv *priv = ieee80211_priv(dev);
SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT];
......@@ -1522,7 +1521,8 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
* Note: I doubt whether SetBWModeInProgress flag is necessary as we can
* test whether current work in the queue or not.//do I?
* ***************************************************************************/
void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset)
void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth,
HT_EXTCHNL_OFFSET Offset)
{
struct r8192_priv *priv = ieee80211_priv(dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment