Commit 44388c7e authored by Stephen Hemminger's avatar Stephen Hemminger Committed by Jeff Garzik

sky2: dont change LED after autoneg

Don't need to change LED's after auto negotiation, the chip
sets them correctly.
Signed-off-by: default avatarStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent af043aa5
...@@ -1820,29 +1820,6 @@ static void sky2_link_up(struct sky2_port *sky2) ...@@ -1820,29 +1820,6 @@ static void sky2_link_up(struct sky2_port *sky2)
sky2_write8(hw, SK_REG(port, LNK_LED_REG), sky2_write8(hw, SK_REG(port, LNK_LED_REG),
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
if (hw->flags & SKY2_HW_NEWER_PHY) {
u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
switch(sky2->speed) {
case SPEED_10:
led |= PHY_M_LEDC_INIT_CTRL(7);
break;
case SPEED_100:
led |= PHY_M_LEDC_STA1_CTRL(7);
break;
case SPEED_1000:
led |= PHY_M_LEDC_STA0_CTRL(7);
break;
}
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
}
if (netif_msg_link(sky2)) if (netif_msg_link(sky2))
printk(KERN_INFO PFX printk(KERN_INFO PFX
"%s: Link is up at %d Mbps, %s duplex, flow control %s\n", "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment