x86/platform/intel-mid: Remove unused leftovers (msic_power_btn)

There is no driver present, remove the device creation and other
leftovers.

Note, for Intel Merrifield there is another driver which is
instantiated by a certain MFD one and does not need any support from
device_libs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

arch/x86/platform/intel-mid/device_libs/Makefile

@@ -8,7 +8,6 @@ obj-$(subst m,y,$(CONFIG_BRCMFMAC_SDIO)) += platform_bcm43xx.o
 obj-$(subst m,y,$(CONFIG_BT_HCIUART_BCM)) += platform_bt.o
 # IPC Devices
 obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o
-obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o
 obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o
 # SPI Devices
 obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_mrfld_spidev.o
@@ -24,5 +23,4 @@ obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o
 obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
 # MISC Devices
 obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
-obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_mrfld_power_btn.o
 obj-$(subst m,y,$(CONFIG_RTC_DRV_CMOS)) += platform_mrfld_rtc.o

arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Merrifield power button support
- *
- * (C) Copyright 2017 Intel Corporation
- *
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/sfi.h>
-
-#include <asm/intel-mid.h>
-#include <asm/intel_scu_ipc.h>
-
-static struct resource mrfld_power_btn_resources[] = {
-	{
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mrfld_power_btn_dev = {
-	.name		= "msic_power_btn",
-	.id		= PLATFORM_DEVID_NONE,
-	.num_resources	= ARRAY_SIZE(mrfld_power_btn_resources),
-	.resource	= mrfld_power_btn_resources,
-};
-
-static int mrfld_power_btn_scu_status_change(struct notifier_block *nb,
-					     unsigned long code, void *data)
-{
-	if (code == SCU_DOWN) {
-		platform_device_unregister(&mrfld_power_btn_dev);
-		return 0;
-	}
-
-	return platform_device_register(&mrfld_power_btn_dev);
-}
-
-static struct notifier_block mrfld_power_btn_scu_notifier = {
-	.notifier_call	= mrfld_power_btn_scu_status_change,
-};
-
-static int __init register_mrfld_power_btn(void)
-{
-	if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
-		return -ENODEV;
-
-	/*
-	 * We need to be sure that the SCU IPC is ready before
-	 * PMIC power button device can be registered:
-	 */
-	intel_scu_notifier_add(&mrfld_power_btn_scu_notifier);
-
-	return 0;
-}
-arch_initcall(register_mrfld_power_btn);
-
-static void __init *mrfld_power_btn_platform_data(void *info)
-{
-	struct resource *res = mrfld_power_btn_resources;
-	struct sfi_device_table_entry *pentry = info;
-
-	res->start = res->end = pentry->irq;
-	return NULL;
-}
-
-static const struct devs_id mrfld_power_btn_dev_id __initconst = {
-	.name			= "bcove_power_btn",
-	.type			= SFI_DEV_TYPE_IPC,
-	.delay			= 1,
-	.msic			= 1,
-	.get_platform_data	= &mrfld_power_btn_platform_data,
-};
-
-sfi_device(mrfld_power_btn_dev_id);

arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_msic_power_btn.c: MSIC power btn platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/sfi.h>
-#include <linux/init.h>
-#include <linux/mfd/intel_msic.h>
-#include <asm/intel-mid.h>
-
-#include "platform_msic.h"
-
-static void __init *msic_power_btn_platform_data(void *info)
-{
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
-}
-
-static const struct devs_id msic_power_btn_dev_id __initconst = {
-	.name = "msic_power_btn",
-	.type = SFI_DEV_TYPE_IPC,
-	.delay = 1,
-	.msic = 1,
-	.get_platform_data = &msic_power_btn_platform_data,
-};
-
-sfi_device(msic_power_btn_dev_id);