ARM: dts: imx28: Add DTS description of imx28 based XEA board

This patch adds DTS definition of the imx278 based XEA board.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/Makefile

@@ -725,7 +725,8 @@ dtb-$(CONFIG_ARCH_MXS) += \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
 	imx28-ts4600.dtb \
-	imx28-tx28.dtb
+	imx28-tx28.dtb \
+	imx28-xea.dtb
 dtb-$(CONFIG_ARCH_NOMADIK) += \
 	ste-nomadik-s8815.dtb \
 	ste-nomadik-nhk15.dtb

arch/arm/boot/dts/imx28-lwe.dtsi

+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	aliases {
+		spi2 = &ssp3;
+	};
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3v3: regulator-reg-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_5v: regulator-reg-usb-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_fec_3v3: regulator-reg-fec-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-phy";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clks 53>;
+	assigned-clock-rates = <12000000>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&spi3_pins_a {
+	fsl,pinmux-ids = <
+		MX28_PAD_AUART2_RX__SSP3_D4
+		MX28_PAD_AUART2_TX__SSP3_D5
+		MX28_PAD_SSP3_SCK__SSP3_SCK
+		MX28_PAD_SSP3_MOSI__SSP3_CMD
+		MX28_PAD_SSP3_MISO__SSP3_D0
+		MX28_PAD_SSP3_SS0__SSP3_D3
+		MX28_PAD_AUART2_TX__GPIO_3_9
+	>;
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3v3>;
+	non-removable;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&ssp3 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins_a>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0x80000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "env0";
+				reg = <0x80000 0x10000>;
+			};
+
+			partition@90000 {
+				label = "env1";
+				reg = <0x90000 0x10000>;
+			};
+
+			partition@100000 {
+				label = "kernel";
+				reg = <0x100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "swupdate";
+				reg = <0x500000 0x800000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb_5v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb_5v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_b>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};

arch/arm/boot/dts/imx28-xea.dts

+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-lwe.dtsi"
+
+/ {
+	compatible = "lwn,imx28-xea", "fsl,imx28";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a &hog_pins_tiva>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_GPMI_D02__GPIO_0_2
+			MX28_PAD_GPMI_D05__GPIO_0_5
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_RDY0__GPIO_0_20
+			MX28_PAD_GPMI_RDY1__GPIO_0_21
+			MX28_PAD_GPMI_RDY2__GPIO_0_22
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+			MX28_PAD_LCD_VSYNC__GPIO_1_28
+			MX28_PAD_SSP1_SCK__GPIO_2_12
+			MX28_PAD_SSP1_CMD__GPIO_2_13
+			MX28_PAD_SSP2_SS1__GPIO_2_20
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+			MX28_PAD_LCD_D00__GPIO_1_0
+			MX28_PAD_LCD_D01__GPIO_1_1
+			MX28_PAD_LCD_D02__GPIO_1_2
+			MX28_PAD_LCD_D03__GPIO_1_3
+			MX28_PAD_LCD_D04__GPIO_1_4
+			MX28_PAD_LCD_D05__GPIO_1_5
+			MX28_PAD_LCD_D06__GPIO_1_6
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	hog_pins_tiva: hog@1 {
+		reg = <1>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY3__GPIO_0_23
+			MX28_PAD_GPMI_WRN__GPIO_0_25
+		>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	hog_pins_coding: hog@2 {
+		reg = <2>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D01__GPIO_0_1
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D04__GPIO_0_4
+			MX28_PAD_GPMI_D06__GPIO_0_6
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&reg_fec_3v3 {
+	gpio = <&gpio0 0 0>;
+};
+
+&reg_usb_5v {
+	gpio = <&gpio0 2 0>;
+};
+
+&spi2_pins_a {
+	fsl,pinmux-ids = <
+		MX28_PAD_SSP2_SCK__SSP2_SCK
+		MX28_PAD_SSP2_MOSI__SSP2_CMD
+		MX28_PAD_SSP2_MISO__SSP2_D0
+		MX28_PAD_SSP2_SS0__GPIO_2_19
+	>;
+};