Merge branch 'mscc-miim'

Michael Walle says:

====================
net: phy: mscc-miim: add MDIO bus frequency support

Introduce MDIO bus frequency support. This way the board can have a
faster (or maybe slower) bus frequency than the hardware default.

changes since v2:
 - resend, no RFC anymore, because net-next is open again
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/mscc,miim.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mscc,miim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi MII Management Controller (MIIM)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - mscc,ocelot-miim
+      - microchip,lan966x-miim
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    items:
+      - description: base address
+      - description: associated reset register for internal PHYs
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@107009c {
+      compatible = "mscc,ocelot-miim";
+      reg = <0x107009c 0x36>, <0x10700f0 0x8>;
+      interrupts = <14>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      phy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+    };

Documentation/devicetree/bindings/net/mscc-miim.txt

-Microsemi MII Management Controller (MIIM) / MDIO
-=================================================
-
-Properties:
-- compatible: must be "mscc,ocelot-miim" or "microchip,lan966x-miim"
-- reg: The base address of the MDIO bus controller register bank. Optionally, a
-  second register bank can be defined if there is an associated reset register
-  for internal PHYs
-- #address-cells: Must be <1>.
-- #size-cells: Must be <0>.  MDIO addresses have no size component.
-- interrupts: interrupt specifier (refer to the interrupt binding)
-
-Typically an MDIO bus might have several children.
-
-Example:
-	mdio@107009c {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "mscc,ocelot-miim";
-		reg = <0x107009c 0x36>, <0x10700f0 0x8>;
-		interrupts = <14>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-	};

drivers/net/mdio/mdio-mscc-miim.c

@@ -7,6 +7,7 @@
  */
 
 #include <linux/bitops.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
@@ -30,6 +31,8 @@
 #define		MSCC_MIIM_CMD_VLD		BIT(31)
 #define MSCC_MIIM_REG_DATA		0xC
 #define		MSCC_MIIM_DATA_ERROR		(BIT(16) | BIT(17))
+#define MSCC_MIIM_REG_CFG		0x10
+#define		MSCC_MIIM_CFG_PRESCALE_MASK	GENMASK(7, 0)
 
 #define MSCC_PHY_REG_PHY_CFG	0x0
 #define		PHY_CFG_PHY_ENA		(BIT(0) | BIT(1) | BIT(2) | BIT(3))
@@ -50,6 +53,8 @@ struct mscc_miim_dev {
 	int mii_status_offset;
 	struct regmap *phy_regs;
 	const struct mscc_miim_info *info;
+	struct clk *clk;
+	u32 bus_freq;
 };
 
 /* When high resolution timers aren't built-in: we can't use usleep_range() as
@@ -235,9 +240,32 @@ int mscc_miim_setup(struct device *dev, struct mii_bus **pbus, const char *name,
 }
 EXPORT_SYMBOL(mscc_miim_setup);
 
+static int mscc_miim_clk_set(struct mii_bus *bus)
+{
+	struct mscc_miim_dev *miim = bus->priv;
+	unsigned long rate;
+	u32 div;
+
+	/* Keep the current settings */
+	if (!miim->bus_freq)
+		return 0;
+
+	rate = clk_get_rate(miim->clk);
+
+	div = DIV_ROUND_UP(rate, 2 * miim->bus_freq) - 1;
+	if (div == 0 || div & ~MSCC_MIIM_CFG_PRESCALE_MASK) {
+		dev_err(&bus->dev, "Incorrect MDIO clock frequency\n");
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(miim->regs, MSCC_MIIM_REG_CFG,
+				  MSCC_MIIM_CFG_PRESCALE_MASK, div);
+}
+
 static int mscc_miim_probe(struct platform_device *pdev)
 {
 	struct regmap *mii_regmap, *phy_regmap = NULL;
+	struct device_node *np = pdev->dev.of_node;
 	void __iomem *regs, *phy_regs;
 	struct mscc_miim_dev *miim;
 	struct resource *res;
@@ -288,21 +316,47 @@ static int mscc_miim_probe(struct platform_device *pdev)
 	if (!miim->info)
 		return -EINVAL;
 
-	ret = of_mdiobus_register(bus, pdev->dev.of_node);
+	miim->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(miim->clk))
+		return PTR_ERR(miim->clk);
+
+	of_property_read_u32(np, "clock-frequency", &miim->bus_freq);
+
+	if (miim->bus_freq && !miim->clk) {
+		dev_err(&pdev->dev,
+			"cannot use clock-frequency without a clock\n");
+		return -EINVAL;
+	}
+
+	ret = clk_prepare_enable(miim->clk);
+	if (ret)
+		return ret;
+
+	ret = mscc_miim_clk_set(bus);
+	if (ret)
+		goto out_disable_clk;
+
+	ret = of_mdiobus_register(bus, np);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret);
-		return ret;
+		goto out_disable_clk;
 	}
 
 	platform_set_drvdata(pdev, bus);
 
 	return 0;
+
+out_disable_clk:
+	clk_disable_unprepare(miim->clk);
+	return ret;
 }
 
 static int mscc_miim_remove(struct platform_device *pdev)
 {
 	struct mii_bus *bus = platform_get_drvdata(pdev);
+	struct mscc_miim_dev *miim = bus->priv;
 
+	clk_disable_unprepare(miim->clk);
 	mdiobus_unregister(bus);
 
 	return 0;