Commit 44f28934 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

media: vidtv.rst: add kernel-doc markups

Fix existing issues at the kernel-doc markups and add them to
the vidtv.rst file.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
parent 020120af
......@@ -484,3 +484,30 @@ A nice addition is to simulate some noise when the signal quality is bad by:
- Updating the error statistics accordingly (e.g. BER, etc).
- Simulating some noise in the encoded data.
Functions and structs used within vidtv
---------------------------------------
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_bridge.h
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_channel.h
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_demod.h
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_encoder.h
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_mux.h
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_pes.h
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_psi.h
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_s302m.h
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_ts.h
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_tuner.h
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_common.c
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_tuner.c
......@@ -34,7 +34,7 @@
* @adapter: Represents a DTV adapter. See 'dvb_register_adapter'.
* @demux: The demux used by the dvb_dmx_swfilter_packets() call.
* @dmx_dev: Represents a demux device.
* @dmx_frontend: The frontends associated with the demux.
* @dmx_fe: The frontends associated with the demux.
* @i2c_adapter: The i2c_adapter associated with the bridge driver.
* @i2c_client_demod: The i2c_clients associated with the demodulator modules.
* @i2c_client_tuner: The i2c_clients associated with the tuner modules.
......
......@@ -39,6 +39,7 @@
* Every stream will have its corresponding encoder polled to produce TS packets
* These packets may be interleaved by the mux and then delivered to the bridge
*
* @name: name of the channel
* @transport_stream_id: a number to identify the TS, chosen at will.
* @service: A _single_ service. Will be concatenated into the SDT.
* @program_num: The link between PAT, PMT and SDT.
......
......@@ -20,6 +20,9 @@
* modulation and fec_inner
* @modulation: see enum fe_modulation
* @fec: see enum fe_fec_rate
* @cnr_ok: S/N threshold to consider the signal as OK. Below that, there's
* a chance of losing sync.
* @cnr_good: S/N threshold to consider the signal strong.
*
* This struct matches values for 'good' and 'ok' CNRs given the combination
* of modulation and fec_inner in use. We might simulate some noise if the
......@@ -53,13 +56,8 @@ struct vidtv_demod_config {
* struct vidtv_demod_state - The demodulator state
* @frontend: The frontend structure allocated by the demod.
* @config: The config used to init the demod.
* @poll_snr: The task responsible for periodically checking the simulated
* signal quality, eventually dropping or reacquiring the TS lock.
* @status: the demod status.
* @cold_start: Whether the demod has not been init yet.
* @poll_snr_thread_running: Whether the task responsible for periodically
* checking the simulated signal quality is running.
* @poll_snr_thread_restart: Whether we should restart the poll_snr task.
* @tuner_cnr: current S/N ratio for the signal carrier
*/
struct vidtv_demod_state {
struct dvb_frontend frontend;
......
......@@ -103,14 +103,16 @@ enum musical_notes {
* @encoder_buf_sz: The encoder buffer size, in bytes
* @encoder_buf_offset: Our byte position in the encoder buffer.
* @sample_count: How many samples we have encoded in total.
* @access_units: encoder payload units, used for clock references
* @src_buf: The source of raw data to be encoded, encoder might set a
* default if null.
* @src_buf_sz: size of @src_buf.
* @src_buf_offset: Our position in the source buffer.
* @is_video_encoder: Whether this a video encoder (as opposed to audio)
* @ctx: Encoder-specific state.
* @stream_id: Examples: Audio streams (0xc0-0xdf), Video streams
* (0xe0-0xef).
* @es_id: The TS PID to use for the elementary stream in this encoder.
* @es_pid: The TS PID to use for the elementary stream in this encoder.
* @encode: Prepare enough AUs for the given amount of time.
* @clear: Clear the encoder output.
* @sync: Attempt to synchronize with this encoder.
......
......@@ -59,6 +59,7 @@ struct vidtv_mux_timing {
* @pat: The PAT in use by the muxer.
* @pmt_secs: The PMT sections in use by the muxer. One for each program in the PAT.
* @sdt: The SDT in use by the muxer.
* @nit: The NIT in use by the muxer.
* @eit: the EIT in use by the muxer.
*/
struct vidtv_mux_si {
......@@ -86,8 +87,10 @@ struct vidtv_mux_pid_ctx {
/**
* struct vidtv_mux - A muxer abstraction loosely based in libavcodec/mpegtsenc.c
* @mux_rate_kbytes_sec: The bit rate for the TS, in kbytes.
* @fe: The frontend structure allocated by the muxer.
* @dev: pointer to struct device.
* @timing: Keeps track of timing related information.
* @mux_rate_kbytes_sec: The bit rate for the TS, in kbytes.
* @pid_ctx: A hash table to keep track of per-PID metadata.
* @on_new_packets_available_cb: A callback to inform of new TS packets ready.
* @mux_buf: A pointer to a buffer for this muxer. TS packets are stored there
......
......@@ -113,8 +113,10 @@ struct pes_header_write_args {
* @dest_buf_sz: The size of the dest_buffer
* @pid: The PID to use for the TS packets.
* @continuity_counter: Incremented on every new TS packet.
* @n_pes_h_s_bytes: Padding bytes. Might be used by an encoder if needed, gets
* @wrote_pes_header: Flag to indicate that the PES header was written
* @n_stuffing_bytes: Padding bytes. Might be used by an encoder if needed, gets
* discarded by the decoder.
* @pcr: counter driven by a 27Mhz clock.
*/
struct pes_ts_header_write_args {
void *dest_buf;
......@@ -145,6 +147,7 @@ struct pes_ts_header_write_args {
* @dts: DTS value to send.
* @n_pes_h_s_bytes: Padding bytes. Might be used by an encoder if needed, gets
* discarded by the decoder.
* @pcr: counter driven by a 27Mhz clock.
*/
struct pes_write_args {
void *dest_buf;
......
......@@ -43,7 +43,7 @@ enum vidtv_psi_stream_types {
STREAM_PRIVATE_DATA = 0x06, /* see ISO/IEC 13818-1 2000 p. 48 */
};
/**
/*
* struct vidtv_psi_desc - A generic PSI descriptor type.
* The descriptor length is an 8-bit field specifying the total number of bytes of the data portion
* of the descriptor following the byte defining the value of this field.
......@@ -55,7 +55,7 @@ struct vidtv_psi_desc {
u8 data[];
} __packed;
/**
/*
* struct vidtv_psi_desc_service - Service descriptor.
* See ETSI EN 300 468 section 6.2.33.
*/
......@@ -71,7 +71,7 @@ struct vidtv_psi_desc_service {
char *service_name;
} __packed;
/**
/*
* struct vidtv_psi_desc_registration - A registration descriptor.
* See ISO/IEC 13818-1 section 2.6.8
*/
......@@ -93,7 +93,7 @@ struct vidtv_psi_desc_registration {
u8 additional_identification_info[];
} __packed;
/**
/*
* struct vidtv_psi_desc_network_name - A network name descriptor
* see ETSI EN 300 468 v1.15.1 section 6.2.27
*/
......@@ -110,7 +110,7 @@ struct vidtv_psi_desc_service_list_entry {
struct vidtv_psi_desc_service_list_entry *next;
} __packed;
/**
/*
* struct vidtv_psi_desc_service_list - A service list descriptor
* see ETSI EN 300 468 v1.15.1 section 6.2.35
*/
......@@ -121,7 +121,7 @@ struct vidtv_psi_desc_service_list {
struct vidtv_psi_desc_service_list_entry *service_list;
} __packed;
/**
/*
* struct vidtv_psi_desc_short_event - A short event descriptor
* see ETSI EN 300 468 v1.15.1 section 6.2.37
*/
......@@ -142,7 +142,7 @@ struct vidtv_psi_desc_short_event
char *event_name,
char *text);
/**
/*
* struct vidtv_psi_table_header - A header that is present for all PSI tables.
*/
struct vidtv_psi_table_header {
......@@ -158,7 +158,7 @@ struct vidtv_psi_table_header {
u8 last_section; /* last_section_number */
} __packed;
/**
/*
* struct vidtv_psi_table_pat_program - A single program in the PAT
* See ISO/IEC 13818-1 : 2000 p.43
*/
......@@ -168,7 +168,7 @@ struct vidtv_psi_table_pat_program {
struct vidtv_psi_table_pat_program *next;
} __packed;
/**
/*
* struct vidtv_psi_table_pat - The Program Allocation Table (PAT)
* See ISO/IEC 13818-1 : 2000 p.43
*/
......@@ -179,7 +179,7 @@ struct vidtv_psi_table_pat {
struct vidtv_psi_table_pat_program *program;
} __packed;
/**
/*
* struct vidtv_psi_table_sdt_service - Represents a service in the SDT.
* see ETSI EN 300 468 v1.15.1 section 5.2.3.
*/
......@@ -193,7 +193,7 @@ struct vidtv_psi_table_sdt_service {
struct vidtv_psi_table_sdt_service *next;
} __packed;
/**
/*
* struct vidtv_psi_table_sdt - Represents the Service Description Table
* see ETSI EN 300 468 v1.15.1 section 5.2.3.
*/
......@@ -205,7 +205,7 @@ struct vidtv_psi_table_sdt {
struct vidtv_psi_table_sdt_service *service;
} __packed;
/**
/*
* enum service_running_status - Status of a SDT service.
* see ETSI EN 300 468 v1.15.1 section 5.2.3 table 6.
*/
......@@ -213,7 +213,7 @@ enum service_running_status {
RUNNING = 0x4,
};
/**
/*
* enum service_type - The type of a SDT service.
* see ETSI EN 300 468 v1.15.1 section 6.2.33, table 81.
*/
......@@ -223,7 +223,7 @@ enum service_type {
DIGITAL_RADIO_SOUND_SERVICE = 0X2,
};
/**
/*
* struct vidtv_psi_table_pmt_stream - A single stream in the PMT.
* See ISO/IEC 13818-1 : 2000 p.46.
*/
......@@ -235,7 +235,7 @@ struct vidtv_psi_table_pmt_stream {
struct vidtv_psi_table_pmt_stream *next;
} __packed;
/**
/*
* struct vidtv_psi_table_pmt - The Program Map Table (PMT).
* See ISO/IEC 13818-1 : 2000 p.46.
*/
......@@ -477,7 +477,6 @@ struct vidtv_psi_desc *vidtv_psi_desc_clone(struct vidtv_psi_desc *desc);
* vidtv_psi_create_sec_for_each_pat_entry - Create a PMT section for each
* program found in the PAT
* @pat: The PAT to look for programs.
* @s: The stream loop (one or more streams)
* @pcr_pid: packet ID for the PCR to be used for the program described in this
* PMT section
*/
......@@ -595,9 +594,11 @@ u32 vidtv_psi_sdt_write_into(struct vidtv_psi_sdt_write_args *args);
* @buf: The destination buffer.
* @offset: The offset into the destination buffer.
* @pmt: A pointer to the PMT.
* @pid: Program ID
* @buf_sz: The size of the destination buffer.
* @continuity_counter: A pointer to the CC. Incremented on every new packet.
*
* @pcr_pid: The TS PID used for the PSI packets. All channels will share the
* same PCR.
*/
struct vidtv_psi_pmt_write_args {
char *buf;
......@@ -713,7 +714,7 @@ u32 vidtv_psi_nit_write_into(struct vidtv_psi_nit_write_args *args);
void vidtv_psi_nit_table_destroy(struct vidtv_psi_table_nit *nit);
/**
/*
* struct vidtv_psi_desc_short_event - A short event descriptor
* see ETSI EN 300 468 v1.15.1 section 6.2.37
*/
......@@ -748,7 +749,7 @@ struct vidtv_psi_table_eit
* struct vidtv_psi_eit_write_args - Arguments for writing an EIT section
* @buf: The destination buffer.
* @offset: The offset into the destination buffer.
* @nit: A pointer to the NIT
* @eit: A pointer to the EIT
* @buf_sz: The size of the destination buffer.
* @continuity_counter: A pointer to the CC. Incremented on every new packet.
*
......
......@@ -33,6 +33,9 @@
* @enc: A pointer to the containing encoder structure.
* @frame_index: The current frame in a block
* @au_count: The total number of access units encoded up to now
* @last_duration: Duration of the tone currently being played
* @note_offset: Position at the music tone array
* @last_tone: Tone currently being played
*/
struct vidtv_s302m_ctx {
struct vidtv_encoder *enc;
......@@ -43,7 +46,7 @@ struct vidtv_s302m_ctx {
enum musical_notes last_tone;
};
/**
/*
* struct vidtv_smpte_s302m_es - s302m MPEG Elementary Stream header.
*
* See SMPTE 302M 2007 table 1.
......
......@@ -53,7 +53,7 @@ struct vidtv_mpeg_ts {
* @dest_offset: The byte offset into the buffer.
* @pid: The TS PID for the PCR packets.
* @buf_sz: The size of the buffer in bytes.
* @countinuity_counter: The TS continuity_counter.
* @continuity_counter: The TS continuity_counter.
* @pcr: A sample from the system clock.
*/
struct pcr_write_args {
......@@ -70,7 +70,7 @@ struct pcr_write_args {
* @dest_buf: The buffer to write into.
* @dest_offset: The byte offset into the buffer.
* @buf_sz: The size of the buffer in bytes.
* @countinuity_counter: The TS continuity_counter.
* @continuity_counter: The TS continuity_counter.
*/
struct null_packet_write_args {
void *dest_buf;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment