Commit 452976b2 authored by Haavard Skinnemoen's avatar Haavard Skinnemoen Committed by Linus Torvalds

[PATCH] AVR32: Use __raw MMIO access for internal peripherals

The read[bwl] and write[bwl] functions are meant for accessing PCI
devices. How this is achieved on AVR32 is unknown, as there are no
systems with a PCI bridge available yet.

On-chip peripheral access, however, should not depend on how we end
up implementing PCI access, so using __raw_read[bwl]/__raw_write[bwl]
is the right thing to do for on-chip peripherals. This patch converts
the drivers for the static memory controller, interrupt controller,
PIO controller and system manager to use __raw MMIO access.
Signed-off-by: default avatarHaavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent d68041cc
...@@ -120,8 +120,8 @@ ...@@ -120,8 +120,8 @@
/* Register access macros */ /* Register access macros */
#define hsmc_readl(port,reg) \ #define hsmc_readl(port,reg) \
readl((port)->regs + HSMC_##reg) __raw_readl((port)->regs + HSMC_##reg)
#define hsmc_writel(port,reg,value) \ #define hsmc_writel(port,reg,value) \
writel((value), (port)->regs + HSMC_##reg) __raw_writel((value), (port)->regs + HSMC_##reg)
#endif /* __ASM_AVR32_HSMC_H__ */ #endif /* __ASM_AVR32_HSMC_H__ */
...@@ -321,7 +321,9 @@ ...@@ -321,7 +321,9 @@
#define INTC_MKBF(name, value) (((value) & ((1 << INTC_##name##_SIZE) - 1)) << INTC_##name##_OFFSET) #define INTC_MKBF(name, value) (((value) & ((1 << INTC_##name##_SIZE) - 1)) << INTC_##name##_OFFSET)
#define INTC_GETBF(name, value) (((value) >> INTC_##name##_OFFSET) & ((1 << INTC_##name##_SIZE) - 1)) #define INTC_GETBF(name, value) (((value) >> INTC_##name##_OFFSET) & ((1 << INTC_##name##_SIZE) - 1))
#define intc_readl(port,reg) readl((port)->regs + INTC_##reg) #define intc_readl(port,reg) \
#define intc_writel(port,reg,value) writel((value), (port)->regs + INTC_##reg) __raw_readl((port)->regs + INTC_##reg)
#define intc_writel(port,reg,value) \
__raw_writel((value), (port)->regs + INTC_##reg)
#endif /* __ASM_AVR32_PERIHP_INTC_H__ */ #endif /* __ASM_AVR32_PERIHP_INTC_H__ */
...@@ -170,8 +170,10 @@ ...@@ -170,8 +170,10 @@
#define PIO_BFINS(name,value,old) (((old) & ~(((1 << PIO_##name##_SIZE) - 1) << PIO_##name##_OFFSET)) | PIO_BF(name,value)) #define PIO_BFINS(name,value,old) (((old) & ~(((1 << PIO_##name##_SIZE) - 1) << PIO_##name##_OFFSET)) | PIO_BF(name,value))
/* Register access macros */ /* Register access macros */
#define pio_readl(port,reg) readl((port)->regs + PIO_##reg) #define pio_readl(port,reg) \
#define pio_writel(port,reg,value) writel((value), (port)->regs + PIO_##reg) __raw_readl((port)->regs + PIO_##reg)
#define pio_writel(port,reg,value) \
__raw_writel((value), (port)->regs + PIO_##reg)
void at32_init_pio(struct platform_device *pdev); void at32_init_pio(struct platform_device *pdev);
......
...@@ -234,7 +234,9 @@ ...@@ -234,7 +234,9 @@
#define SM_BFINS(name,value,old) (((old) & ~(((1 << SM_##name##_SIZE) - 1) << SM_##name##_OFFSET)) | SM_BF(name,value)) #define SM_BFINS(name,value,old) (((old) & ~(((1 << SM_##name##_SIZE) - 1) << SM_##name##_OFFSET)) | SM_BF(name,value))
/* Register access macros */ /* Register access macros */
#define sm_readl(port,reg) readl((port)->regs + SM_##reg) #define sm_readl(port,reg) \
#define sm_writel(port,reg,value) writel((value), (port)->regs + SM_##reg) __raw_readl((port)->regs + SM_##reg)
#define sm_writel(port,reg,value) \
__raw_writel((value), (port)->regs + SM_##reg)
#endif /* __ASM_AVR32_SM_H__ */ #endif /* __ASM_AVR32_SM_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment