pci: PCIe driver for Marvell Armada 370/XP systems

This driver implements the support for the PCIe interfaces on the
Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to
cover earlier families of Marvell SoCs, such as Dove, Orion and
Kirkwood.

The driver implements the hw_pci operations needed by the core ARM PCI
code to setup PCI devices and get their corresponding IRQs, and the
pci_ops operations that are used by the PCI core to read/write the
configuration space of PCI devices.

Since the PCIe interfaces of Marvell SoCs are completely separate and
not linked together in a bus, this driver sets up an emulated PCI host
bridge, with one PCI-to-PCI bridge as child for each hardware PCIe
interface.

In addition, this driver enumerates the different PCIe slots, and for
those having a device plugged in, it sets up the necessary address
decoding windows, using the mvebu-mbus driver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Documentation/devicetree/bindings/pci/mvebu-pci.txt

+* Marvell EBU PCIe interfaces
+
+Mandatory properties:
+- compatible: one of the following values:
+    marvell,armada-370-pcie
+    marvell,armada-xp-pcie
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- bus-range: PCI bus numbers covered
+- device_type, set to "pci"
+- ranges: ranges for the PCI memory and I/O regions, as well as the
+  MMIO registers to control the PCIe interfaces.
+
+In addition, the Device Tree node must have sub-nodes describing each
+PCIe interface, having the following mandatory properties:
+- reg: used only for interrupt mapping, so only the first four bytes
+  are used to refer to the correct bus number and device number.
+- assigned-addresses: reference to the MMIO registers used to control
+  this PCIe interface.
+- clocks: the clock associated to this PCIe interface
+- marvell,pcie-port: the physical PCIe port number
+- status: either "disabled" or "okay"
+- device_type, set to "pci"
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- ranges, empty property.
+- interrupt-map-mask and interrupt-map, standard PCI properties to
+  define the mapping of the PCIe interface to interrupt numbers.
+
+and the following optional properties:
+- marvell,pcie-lane: the physical PCIe lane number, for ports having
+  multiple lanes. If this property is not found, we assume that the
+  value is 0.
+
+Example:
+
+pcie-controller {
+	compatible = "marvell,armada-xp-pcie";
+	status = "disabled";
+	device_type = "pci";
+
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bus-range = <0x00 0xff>;
+
+	ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000   /* Port 0.0 registers */
+		  0x82000000 0 0xd0042000 0xd0042000 0 0x00002000   /* Port 2.0 registers */
+		  0x82000000 0 0xd0044000 0xd0044000 0 0x00002000   /* Port 0.1 registers */
+		  0x82000000 0 0xd0048000 0xd0048000 0 0x00002000   /* Port 0.2 registers */
+		  0x82000000 0 0xd004c000 0xd004c000 0 0x00002000   /* Port 0.3 registers */
+		  0x82000000 0 0xd0080000 0xd0080000 0 0x00002000   /* Port 1.0 registers */
+		  0x82000000 0 0xd0082000 0xd0082000 0 0x00002000   /* Port 3.0 registers */
+		  0x82000000 0 0xd0084000 0xd0084000 0 0x00002000   /* Port 1.1 registers */
+		  0x82000000 0 0xd0088000 0xd0088000 0 0x00002000   /* Port 1.2 registers */
+		  0x82000000 0 0xd008c000 0xd008c000 0 0x00002000   /* Port 1.3 registers */
+		  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+		  0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
+
+	pcie@1,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+		reg = <0x0800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 58>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <0>;
+		clocks = <&gateclk 5>;
+		status = "disabled";
+	};
+
+	pcie@2,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>;
+		reg = <0x1000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 59>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <1>;
+		clocks = <&gateclk 6>;
+		status = "disabled";
+	};
+
+	pcie@3,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>;
+		reg = <0x1800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 60>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <2>;
+		clocks = <&gateclk 7>;
+		status = "disabled";
+	};
+
+	pcie@4,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>;
+		reg = <0x2000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 61>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <3>;
+		clocks = <&gateclk 8>;
+		status = "disabled";
+	};
+
+	pcie@5,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
+		reg = <0x2800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 62>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <0>;
+		clocks = <&gateclk 9>;
+		status = "disabled";
+	};
+
+	pcie@6,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>;
+		reg = <0x3000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 63>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <1>;
+		clocks = <&gateclk 10>;
+		status = "disabled";
+	};
+
+	pcie@7,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>;
+		reg = <0x3800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 64>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <2>;
+		clocks = <&gateclk 11>;
+		status = "disabled";
+	};
+
+	pcie@8,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>;
+		reg = <0x4000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 65>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <3>;
+		clocks = <&gateclk 12>;
+		status = "disabled";
+	};
+	pcie@9,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>;
+		reg = <0x4800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 99>;
+		marvell,pcie-port = <2>;
+		marvell,pcie-lane = <0>;
+		clocks = <&gateclk 26>;
+		status = "disabled";
+	};
+
+	pcie@10,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>;
+		reg = <0x5000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 103>;
+		marvell,pcie-port = <3>;
+		marvell,pcie-lane = <0>;
+		clocks = <&gateclk 27>;
+		status = "disabled";
+	};
+};

drivers/pci/Kconfig

@@ -119,3 +119,5 @@ config PCI_IOAPIC
 config PCI_LABEL
 	def_bool y if (DMI || ACPI)
 	select NLS
+
+source "drivers/pci/host/Kconfig"

drivers/pci/Makefile

@@ -67,3 +67,6 @@ obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
 obj-$(CONFIG_OF) += of.o
 
 ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
+
+# PCI host controller drivers
+obj-y += host/

drivers/pci/host/Kconfig

+menu "PCI host controller drivers"
+	depends on PCI
+
+config PCI_MVEBU
+	bool "Marvell EBU PCIe controller"
+	depends on ARCH_MVEBU
+
+endmenu

drivers/pci/host/Makefile

+obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o