move ide/legacy/hd.c to drivers/block/

This patch moves hd.c to drivers/block/
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: rmk@arm.linux.org.uk
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/block/Kconfig

@@ -433,4 +433,28 @@ config VIRTIO_BLK
 	  This is the virtual block driver for virtio.  It can be used with
           lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
 
+config BLK_DEV_HD
+	bool "Old hard disk (MFM/RLL/IDE) driver"
+	depends on HAVE_IDE
+	depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
+	help
+	  There are two drivers for MFM/RLL/IDE hard disks. Most people use
+	  the newer enhanced driver, but this old one is still around for two
+	  reasons. Some older systems have strange timing problems and seem to
+	  work only with the old driver (which itself does not work with some
+	  newer systems). The other reason is that the old driver is smaller,
+	  since it lacks the enhanced functionality of the new one. This makes
+	  it a good choice for systems with very tight memory restrictions, or
+	  for systems with only older MFM/RLL/ESDI drives. Choosing the old
+	  driver can save 13 KB or so of kernel memory.
+
+	  If you want to use this driver together with the new one you have
+	  to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new
+	  driver from probing the primary interface.
+
+	  If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver
+	  instead of this one. For more detailed information, read the
+	  Disk-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
 endif # BLK_DEV

drivers/block/Makefile

@@ -29,5 +29,6 @@ obj-$(CONFIG_VIRTIO_BLK)	+= virtio_blk.o
 obj-$(CONFIG_VIODASD)		+= viodasd.o
 obj-$(CONFIG_BLK_DEV_SX8)	+= sx8.o
 obj-$(CONFIG_BLK_DEV_UB)	+= ub.o
+obj-$(CONFIG_BLK_DEV_HD)	+= hd.o
 
 obj-$(CONFIG_XEN_BLKDEV_FRONTEND)	+= xen-blkfront.o

drivers/ide/Kconfig

@@ -1000,27 +1000,4 @@ config BLK_DEV_IDEDMA
 
 endif
 
-config BLK_DEV_HD
-	bool "Old hard disk (MFM/RLL/IDE) driver"
-	depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
-	help
-	  There are two drivers for MFM/RLL/IDE hard disks. Most people use
-	  the newer enhanced driver, but this old one is still around for two
-	  reasons. Some older systems have strange timing problems and seem to
-	  work only with the old driver (which itself does not work with some
-	  newer systems). The other reason is that the old driver is smaller,
-	  since it lacks the enhanced functionality of the new one. This makes
-	  it a good choice for systems with very tight memory restrictions, or
-	  for systems with only older MFM/RLL/ESDI drives. Choosing the old
-	  driver can save 13 KB or so of kernel memory.
-
-	  If you want to use this driver together with the new one you have
-	  to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new
-	  driver from probing the primary interface.
-
-	  If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver
-	  instead of this one. For more detailed information, read the
-	  Disk-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
 endif # IDE

drivers/ide/Makefile

@@ -61,8 +61,3 @@ ifeq ($(CONFIG_BLK_DEV_PLATFORM), y)
 endif
 
 obj-$(CONFIG_BLK_DEV_IDE)		+= arm/ mips/
-
-ifeq ($(CONFIG_BLK_DEV_HD), y)
-	hd-core-y += legacy/hd.o
-	obj-y += hd-core.o
-endif