Commit 45632c4f authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab Committed by Linus Torvalds

[PATCH] v4l: 863: added pinnacle dazzle dvc 90

- Added Pinnacle Dazzle DVC 90
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 07eef6ce
......@@ -7,3 +7,4 @@
6 -> Terratec Cinergy 200 USB (em2800)
7 -> Leadtek Winfast USB II (em2800)
8 -> Kworld USB2800 (em2800)
9 -> Pinnacle Dazzle DVC 90 (em2820/em2840) [2304:0207]
......@@ -227,6 +227,22 @@ struct em2820_board em2820_boards[] = {
.amux = 1,
}},
},
[EM2820_BOARD_PINNACLE_DVC_90] = {
.name = "Pinnacle Dazzle DVC 90",
.vchannels = 3,
.norm = VIDEO_MODE_PAL,
.has_tuner = 0,
.decoder = EM2820_SAA7113,
.input = {{
.type = EM2820_VMUX_COMPOSITE1,
.vmux = 0,
.amux = 1,
},{
.type = EM2820_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
},
};
const unsigned int em2820_bcount = ARRAY_SIZE(em2820_boards);
......@@ -237,6 +253,7 @@ struct usb_device_id em2820_id_table [] = {
{ USB_DEVICE(0x0ccd, 0x0036), .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
{ USB_DEVICE(0x2304, 0x0208), .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
{ USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
{ USB_DEVICE(0x2304, 0x0207), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ },
};
......@@ -258,6 +275,9 @@ void em2820_card_setup(struct em2820 *dev)
if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
dev->has_msp34xx=1;
} else dev->has_msp34xx=0;
em2820_write_regs_req(dev,0x06,0x00,"\x40",1);// Serial Bus Frequency Select Register
em2820_write_regs_req(dev,0x0f,0x00,"\x87",1);// XCLK Frequency Select Register
em2820_write_regs_req(dev,0x88,0x0d,"\xd0",1);
}
}
......
......@@ -40,6 +40,7 @@
#define EM2800_BOARD_TERRATEC_CINERGY_200 6
#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7
#define EM2800_BOARD_KWORLD_USB2800 8
#define EM2820_BOARD_PINNACLE_DVC_90 9
#define UNSET -1
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment