sfi: Remove framework for deprecated firmware

SFI-based platforms are gone. So does this framework.

This removes mention of SFI through the drivers and other code as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Documentation/ABI/testing/sysfs-firmware-sfi

-What:		/sys/firmware/sfi/tables/
-Date:		May 2010
-Contact:	Len Brown <lenb@kernel.org>
-Description:
-		SFI defines a number of small static memory tables
-		so the kernel can get platform information from firmware.
-
-		The tables are defined in the latest SFI specification:
-		http://simplefirmware.org/documentation
-
-		While the tables are used by the kernel, user-space
-		can observe them this way::
-
-		  # cd /sys/firmware/sfi/tables
-		  # cat $TABLENAME > $TABLENAME.bin

Documentation/ABI/testing/sysfs-platform-kim

@@ -7,7 +7,7 @@ Description:
 		is connected. example: "/dev/ttyS0".
 
 		The device name flows down to architecture specific board
-		initialization file from the SFI/ATAGS bootloader
+		initialization file from the ATAGS bootloader
 		firmware. The name exposed is read from the user-space
 		dameon and opens the device when install is requested.
 

MAINTAINERS

@@ -16234,13 +16234,6 @@ S:	Maintained
 F:	Documentation/fb/sm712fb.rst
 F:	drivers/video/fbdev/sm712*
 
-SIMPLE FIRMWARE INTERFACE (SFI)
-S:	Obsolete
-W:	http://simplefirmware.org/
-F:	arch/x86/platform/sfi/
-F:	drivers/sfi/
-F:	include/linux/sfi*.h
-
 SIMPLEFB FB DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-fbdev@vger.kernel.org

arch/x86/Kconfig

@@ -444,7 +444,7 @@ config X86_X2APIC
 	  If you don't know what to do here, say N.
 
 config X86_MPPARSE
-	bool "Enable MPS table" if ACPI || SFI
+	bool "Enable MPS table" if ACPI
 	default y
 	depends on X86_LOCAL_APIC
 	help
@@ -603,7 +603,6 @@ config X86_INTEL_MID
 	depends on PCI
 	depends on X86_64 || (PCI_GOANY && X86_32)
 	depends on X86_IO_APIC
-	select SFI
 	select I2C
 	select DW_APB_TIMER
 	select APB_TIMER
@@ -2457,8 +2456,6 @@ source "kernel/power/Kconfig"
 
 source "drivers/acpi/Kconfig"
 
-source "drivers/sfi/Kconfig"
-
 config X86_APM_BOOT
 	def_bool y
 	depends on APM
@@ -2645,7 +2642,7 @@ config PCI_DIRECT
 config PCI_MMCONFIG
 	bool "Support mmconfig PCI config space access" if X86_64
 	default y
-	depends on PCI && (ACPI || SFI || JAILHOUSE_GUEST)
+	depends on PCI && (ACPI || JAILHOUSE_GUEST)
 	depends on X86_64 || (PCI_GOANY || PCI_GOMMCONFIG)
 
 config PCI_OLPC

arch/x86/include/asm/intel-mid.h

@@ -7,7 +7,6 @@
 #ifndef _ASM_X86_INTEL_MID_H
 #define _ASM_X86_INTEL_MID_H
 
-#include <linux/sfi.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
 
@@ -22,39 +21,6 @@ extern void intel_mid_pwr_power_off(void);
 
 extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev);
 
-extern int get_gpio_by_name(const char *name);
-
-/*
- * Here defines the array of devices platform data that IAFW would export
- * through SFI "DEVS" table, we use name and type to match the device and
- * its platform data.
- */
-struct devs_id {
-	char name[SFI_NAME_LEN + 1];
-	u8 type;
-	u8 delay;
-	void *(*get_platform_data)(void *info);
-};
-
-#define sfi_device(i)								\
-	static const struct devs_id *const __intel_mid_sfi_##i##_dev __used	\
-	__section(".x86_intel_mid_dev.init") = &i
-
-/**
-* struct mid_sd_board_info - template for SD device creation
-* @name:		identifies the driver
-* @bus_num:		board-specific identifier for a given SD controller
-* @max_clk:		the maximum frequency device supports
-* @platform_data:	the particular data stored there is driver-specific
-*/
-struct mid_sd_board_info {
-	char		name[SFI_NAME_LEN];
-	int		bus_num;
-	unsigned short	addr;
-	u32		max_clk;
-	void		*platform_data;
-};
-
 /*
  * Medfield is the follow-up of Moorestown, it combines two chip solution into
  * one. Other than that it also added always-on and constant tsc and lapic
@@ -99,7 +65,4 @@ static inline void intel_scu_devices_destroy(void) { }
 /* FSB 83MHz */
 #define BSEL_SOC_FUSE_111		0x7
 
-/* The offset for the mapping of global gpio pin to irq */
-#define INTEL_MID_IRQ_OFFSET		0x100
-
 #endif /* _ASM_X86_INTEL_MID_H */

arch/x86/include/asm/intel_scu_ipc_legacy.h

@@ -2,73 +2,17 @@
 #ifndef _ASM_X86_INTEL_SCU_IPC_LEGACY_H_
 #define _ASM_X86_INTEL_SCU_IPC_LEGACY_H_
 
-#include <linux/notifier.h>
-
-#define IPCMSG_INDIRECT_READ	0x02
-#define IPCMSG_INDIRECT_WRITE	0x05
+#include <linux/types.h>
 
 #define IPCMSG_COLD_OFF		0x80	/* Only for Tangier */
-
-#define IPCMSG_WARM_RESET	0xF0
 #define IPCMSG_COLD_RESET	0xF1
-#define IPCMSG_SOFT_RESET	0xF2
-#define IPCMSG_COLD_BOOT	0xF3
 
 /* Don't call these in new code - they will be removed eventually */
 
-/* Read a vector */
-static inline int intel_scu_ipc_readv(u16 *addr, u8 *data, int len)
-{
-	return intel_scu_ipc_dev_readv(NULL, addr, data, len);
-}
-
-/* Write a vector */
-static inline int intel_scu_ipc_writev(u16 *addr, u8 *data, int len)
-{
-	return intel_scu_ipc_dev_writev(NULL, addr, data, len);
-}
-
-/* Update single register based on the mask */
-static inline int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask)
-{
-	return intel_scu_ipc_dev_update(NULL, addr, data, mask);
-}
-
 /* Issue commands to the SCU with or without data */
 static inline int intel_scu_ipc_simple_command(int cmd, int sub)
 {
 	return intel_scu_ipc_dev_simple_command(NULL, cmd, sub);
 }
 
-static inline int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
-					u32 *out, int outlen)
-{
-	/* New API takes both inlen and outlen as bytes so convert here */
-	size_t inbytes = inlen * sizeof(u32);
-	size_t outbytes = outlen * sizeof(u32);
-
-	return intel_scu_ipc_dev_command_with_size(NULL, cmd, sub, in, inbytes,
-						   inlen, out, outbytes);
-}
-
-extern struct blocking_notifier_head intel_scu_notifier;
-
-static inline void intel_scu_notifier_add(struct notifier_block *nb)
-{
-	blocking_notifier_chain_register(&intel_scu_notifier, nb);
-}
-
-static inline void intel_scu_notifier_remove(struct notifier_block *nb)
-{
-	blocking_notifier_chain_unregister(&intel_scu_notifier, nb);
-}
-
-static inline int intel_scu_notifier_post(unsigned long v, void *p)
-{
-	return blocking_notifier_call_chain(&intel_scu_notifier, v, p);
-}
-
-#define		SCU_AVAILABLE		1
-#define		SCU_DOWN		2
-
 #endif

arch/x86/include/asm/platform_sst_audio.h

@@ -10,8 +10,6 @@
 #ifndef _PLATFORM_SST_AUDIO_H_
 #define _PLATFORM_SST_AUDIO_H_
 
-#include <linux/sfi.h>
-
 #define MAX_NUM_STREAMS_MRFLD	25
 #define MAX_NUM_STREAMS	MAX_NUM_STREAMS_MRFLD
 

arch/x86/kernel/apic/io_apic.c

@@ -198,7 +198,7 @@ static int __init parse_noapic(char *str)
 }
 early_param("noapic", parse_noapic);
 
-/* Will be called in mpparse/acpi/sfi codes for saving IRQ info */
+/* Will be called in mpparse/ACPI codes for saving IRQ info */
 void mp_save_irq(struct mpc_intsrc *m)
 {
 	int i;
@@ -2863,7 +2863,7 @@ int mp_register_ioapic(int id, u32 address, u32 gsi_base,
 
 	/*
 	 * If mp_register_ioapic() is called during early boot stage when
-	 * walking ACPI/SFI/DT tables, it's too early to create irqdomain,
+	 * walking ACPI/DT tables, it's too early to create irqdomain,
 	 * we are still using bootmem allocator. So delay it to setup_IO_APIC().
 	 */
 	if (hotplug) {

arch/x86/kernel/setup.c

@@ -16,7 +16,6 @@
 #include <linux/memblock.h>
 #include <linux/pci.h>
 #include <linux/root_dev.h>
-#include <linux/sfi.h>
 #include <linux/hugetlb.h>
 #include <linux/tboot.h>
 #include <linux/usb/xhci-dbgp.h>
@@ -1185,7 +1184,6 @@ void __init setup_arch(char **cmdline_p)
 	 * Read APIC and some other early information from ACPI tables.
 	 */
 	acpi_boot_init();
-	sfi_init();
 	x86_dtb_init();
 
 	/*

arch/x86/pci/mmconfig-shared.c

@@ -11,9 +11,9 @@
  * themselves.
  */
 
+#include <linux/acpi.h>
 #include <linux/pci.h>
 #include <linux/init.h>
-#include <linux/sfi_acpi.h>
 #include <linux/bitmap.h>
 #include <linux/dmi.h>
 #include <linux/slab.h>
@@ -665,7 +665,7 @@ void __init pci_mmcfg_early_init(void)
 		if (pci_mmcfg_check_hostbridge())
 			known_bridge = 1;
 		else
-			acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
+			acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
 		__pci_mmcfg_init(1);
 
 		set_apei_filter();
@@ -683,7 +683,7 @@ void __init pci_mmcfg_late_init(void)
 
 	/* MMCONFIG hasn't been enabled yet, try again */
 	if (pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF) {
-		acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
+		acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
 		__pci_mmcfg_init(0);
 	}
 }

arch/x86/platform/Makefile

@@ -11,6 +11,5 @@ obj-y	+= intel-mid/
 obj-y	+= intel-quark/
 obj-y	+= olpc/
 obj-y	+= scx200/
-obj-y	+= sfi/
 obj-y	+= ts5500/
 obj-y	+= uv/

arch/x86/platform/intel-mid/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o pwr.o
-
-# SFI specific code
-ifdef CONFIG_X86_INTEL_MID
-obj-$(CONFIG_SFI) += sfi.o device_libs/
-endif

arch/x86/platform/intel-mid/device_libs/Makefile

-# SPDX-License-Identifier: GPL-2.0
-# Family-Level Interface Shim (FLIS)
-obj-$(subst m,y,$(CONFIG_PINCTRL_MERRIFIELD)) += platform_mrfld_pinctrl.o
-# SDHCI Devices
-obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += platform_mrfld_sd.o
-# WiFi + BT
-obj-$(subst m,y,$(CONFIG_BRCMFMAC_SDIO)) += platform_bcm43xx.o
-obj-$(subst m,y,$(CONFIG_BT_HCIUART_BCM)) += platform_bt.o
-# SPI Devices
-obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_mrfld_spidev.o
-# I2C Devices
-obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o
-obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o
-obj-$(subst m,y,$(CONFIG_MPU3050_I2C)) += platform_mpu3050.o
-obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o
-obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o
-# I2C GPIO Expanders
-obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o
-obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o
-obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
-# MISC Devices
-obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
-obj-$(subst m,y,$(CONFIG_RTC_DRV_CMOS)) += platform_mrfld_rtc.o

arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_bcm43xx.c: bcm43xx platform data initialization file
- *
- * (C) Copyright 2016 Intel Corporation
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/sfi.h>
-
-#include <asm/intel-mid.h>
-
-#define WLAN_SFI_GPIO_IRQ_NAME		"WLAN-interrupt"
-#define WLAN_SFI_GPIO_ENABLE_NAME	"WLAN-enable"
-
-#define WLAN_DEV_NAME			"0000:00:01.3"
-
-static struct regulator_consumer_supply bcm43xx_vmmc_supply = {
-	.dev_name		= WLAN_DEV_NAME,
-	.supply			= "vmmc",
-};
-
-static struct regulator_init_data bcm43xx_vmmc_data = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &bcm43xx_vmmc_supply,
-};
-
-static struct fixed_voltage_config bcm43xx_vmmc = {
-	.supply_name		= "bcm43xx-vmmc-regulator",
-	/*
-	 * Announce 2.0V here to be compatible with SDIO specification. The
-	 * real voltage and signaling are still 1.8V.
-	 */
-	.microvolts		= 2000000,		/* 1.8V */
-	.startup_delay		= 250 * 1000,		/* 250ms */
-	.enabled_at_boot	= 0,			/* disabled at boot */
-	.init_data		= &bcm43xx_vmmc_data,
-};
-
-static struct platform_device bcm43xx_vmmc_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= PLATFORM_DEVID_AUTO,
-	.dev = {
-		.platform_data	= &bcm43xx_vmmc,
-	},
-};
-
-static struct gpiod_lookup_table bcm43xx_vmmc_gpio_table = {
-	.dev_id	= "reg-fixed-voltage.0",
-	.table	= {
-		GPIO_LOOKUP("0000:00:0c.0", -1, NULL, GPIO_ACTIVE_LOW),
-		{}
-	},
-};
-
-static int __init bcm43xx_regulator_register(void)
-{
-	struct gpiod_lookup_table *table = &bcm43xx_vmmc_gpio_table;
-	struct gpiod_lookup *lookup = table->table;
-	int ret;
-
-	lookup[0].chip_hwnum = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
-	gpiod_add_lookup_table(table);
-
-	ret = platform_device_register(&bcm43xx_vmmc_regulator);
-	if (ret) {
-		pr_err("%s: vmmc regulator register failed\n", __func__);
-		return ret;
-	}
-
-	return 0;
-}
-
-static void __init *bcm43xx_platform_data(void *info)
-{
-	int ret;
-
-	ret = bcm43xx_regulator_register();
-	if (ret)
-		return NULL;
-
-	pr_info("Using generic wifi platform data\n");
-
-	/* For now it's empty */
-	return NULL;
-}
-
-static const struct devs_id bcm43xx_clk_vmmc_dev_id __initconst = {
-	.name			= "bcm43xx_clk_vmmc",
-	.type			= SFI_DEV_TYPE_SD,
-	.get_platform_data	= &bcm43xx_platform_data,
-};
-
-sfi_device(bcm43xx_clk_vmmc_dev_id);

arch/x86/platform/intel-mid/device_libs/platform_bma023.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_bma023.c: bma023 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- */
-
-#include <asm/intel-mid.h>
-
-static const struct devs_id bma023_dev_id __initconst = {
-	.name = "bma023",
-	.type = SFI_DEV_TYPE_I2C,
-	.delay = 1,
-};
-
-sfi_device(bma023_dev_id);

arch/x86/platform/intel-mid/device_libs/platform_bt.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Bluetooth platform data initialization file
- *
- * (C) Copyright 2017 Intel Corporation
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/gpio/machine.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-
-#include <asm/cpu_device_id.h>
-#include <asm/intel-family.h>
-#include <asm/intel-mid.h>
-
-struct bt_sfi_data {
-	struct device *dev;
-	const char *name;
-	int (*setup)(struct bt_sfi_data *ddata);
-};
-
-static struct gpiod_lookup_table tng_bt_sfi_gpio_table = {
-	.dev_id	= "hci_bcm",
-	.table	= {
-		GPIO_LOOKUP("0000:00:0c.0", -1, "device-wakeup", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("0000:00:0c.0", -1, "shutdown",      GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("0000:00:0c.0", -1, "host-wakeup",   GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-#define TNG_BT_SFI_GPIO_DEVICE_WAKEUP	"bt_wakeup"
-#define TNG_BT_SFI_GPIO_SHUTDOWN	"BT-reset"
-#define TNG_BT_SFI_GPIO_HOST_WAKEUP	"bt_uart_enable"
-
-static int __init tng_bt_sfi_setup(struct bt_sfi_data *ddata)
-{
-	struct gpiod_lookup_table *table = &tng_bt_sfi_gpio_table;
-	struct gpiod_lookup *lookup = table->table;
-	struct pci_dev *pdev;
-
-	/* Connected to /dev/ttyS0 */
-	pdev = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(4, 1));
-	if (!pdev)
-		return -ENODEV;
-
-	ddata->dev = &pdev->dev;
-	ddata->name = table->dev_id;
-
-	lookup[0].chip_hwnum = get_gpio_by_name(TNG_BT_SFI_GPIO_DEVICE_WAKEUP);
-	lookup[1].chip_hwnum = get_gpio_by_name(TNG_BT_SFI_GPIO_SHUTDOWN);
-	lookup[2].chip_hwnum = get_gpio_by_name(TNG_BT_SFI_GPIO_HOST_WAKEUP);
-
-	gpiod_add_lookup_table(table);
-	return 0;
-}
-
-static struct bt_sfi_data tng_bt_sfi_data __initdata = {
-	.setup	= tng_bt_sfi_setup,
-};
-
-static const struct x86_cpu_id bt_sfi_cpu_ids[] = {
-	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID,	&tng_bt_sfi_data),
-	{}
-};
-
-static int __init bt_sfi_init(void)
-{
-	struct platform_device_info info;
-	struct platform_device *pdev;
-	const struct x86_cpu_id *id;
-	struct bt_sfi_data *ddata;
-	int ret;
-
-	id = x86_match_cpu(bt_sfi_cpu_ids);
-	if (!id)
-		return -ENODEV;
-
-	ddata = (struct bt_sfi_data *)id->driver_data;
-	if (!ddata)
-		return -ENODEV;
-
-	ret = ddata->setup(ddata);
-	if (ret)
-		return ret;
-
-	memset(&info, 0, sizeof(info));
-	info.fwnode	= ddata->dev->fwnode;
-	info.parent	= ddata->dev;
-	info.name	= ddata->name,
-	info.id		= PLATFORM_DEVID_NONE,
-
-	pdev = platform_device_register_full(&info);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	dev_info(ddata->dev, "Registered Bluetooth device: %s\n", ddata->name);
-	return 0;
-}
-device_initcall(bt_sfi_init);

arch/x86/platform/intel-mid/device_libs/platform_emc1403.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_emc1403.c: emc1403 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <asm/intel-mid.h>
-
-static void __init *emc1403_platform_data(void *info)
-{
-	static short intr2nd_pdata;
-	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("thermal_int");
-	int intr2nd = get_gpio_by_name("thermal_alert");
-
-	if (intr < 0)
-		return NULL;
-	if (intr2nd < 0)
-		return NULL;
-
-	i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-	intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
-
-	return &intr2nd_pdata;
-}
-
-static const struct devs_id emc1403_dev_id __initconst = {
-	.name = "emc1403",
-	.type = SFI_DEV_TYPE_I2C,
-	.delay = 1,
-	.get_platform_data = &emc1403_platform_data,
-};
-
-sfi_device(emc1403_dev_id);

arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_gpio_keys.c: gpio_keys platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/input.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/platform_device.h>
-#include <asm/intel-mid.h>
-
-#define DEVICE_NAME "gpio-keys"
-
-/*
- * we will search these buttons in SFI GPIO table (by name)
- * and register them dynamically. Please add all possible
- * buttons here, we will shrink them if no GPIO found.
- */
-static struct gpio_keys_button gpio_button[] = {
-	{KEY_POWER,		-1, 1, "power_btn",	EV_KEY, 0, 3000},
-	{KEY_PROG1,		-1, 1, "prog_btn1",	EV_KEY, 0, 20},
-	{KEY_PROG2,		-1, 1, "prog_btn2",	EV_KEY, 0, 20},
-	{SW_LID,		-1, 1, "lid_switch",	EV_SW,  0, 20},
-	{KEY_VOLUMEUP,		-1, 1, "vol_up",	EV_KEY, 0, 20},
-	{KEY_VOLUMEDOWN,	-1, 1, "vol_down",	EV_KEY, 0, 20},
-	{KEY_MUTE,		-1, 1, "mute_enable",	EV_KEY, 0, 20},
-	{KEY_VOLUMEUP,		-1, 1, "volume_up",	EV_KEY, 0, 20},
-	{KEY_VOLUMEDOWN,	-1, 1, "volume_down",	EV_KEY, 0, 20},
-	{KEY_CAMERA,		-1, 1, "camera_full",	EV_KEY, 0, 20},
-	{KEY_CAMERA_FOCUS,	-1, 1, "camera_half",	EV_KEY, 0, 20},
-	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw1",	EV_SW,  0, 20},
-	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw2",	EV_SW,  0, 20},
-};
-
-static struct gpio_keys_platform_data gpio_keys = {
-	.buttons	= gpio_button,
-	.rep		= 1,
-	.nbuttons	= -1, /* will fill it after search */
-};
-
-static struct platform_device pb_device = {
-	.name		= DEVICE_NAME,
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &gpio_keys,
-	},
-};
-
-/*
- * Shrink the non-existent buttons, register the gpio button
- * device if there is some
- */
-static int __init pb_keys_init(void)
-{
-	struct gpio_keys_button *gb = gpio_button;
-	int i, good = 0;
-
-	for (i = 0; i < ARRAY_SIZE(gpio_button); i++) {
-		gb[i].gpio = get_gpio_by_name(gb[i].desc);
-		pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
-					gb[i].gpio);
-		if (gb[i].gpio < 0)
-			continue;
-
-		if (i != good)
-			gb[good] = gb[i];
-		good++;
-	}
-
-	if (good) {
-		gpio_keys.nbuttons = good;
-		return platform_device_register(&pb_device);
-	}
-	return 0;
-}
-late_initcall(pb_keys_init);

arch/x86/platform/intel-mid/device_libs/platform_lis331.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_lis331.c:  lis331 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <asm/intel-mid.h>
-
-static void __init *lis331dl_platform_data(void *info)
-{
-	static short intr2nd_pdata;
-	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("accel_int");
-	int intr2nd = get_gpio_by_name("accel_2");
-
-	if (intr < 0)
-		return NULL;
-	if (intr2nd < 0)
-		return NULL;
-
-	i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-	intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
-
-	return &intr2nd_pdata;
-}
-
-static const struct devs_id lis331dl_dev_id __initconst = {
-	.name = "i2c_accel",
-	.type = SFI_DEV_TYPE_I2C,
-	.get_platform_data = &lis331dl_platform_data,
-};
-
-sfi_device(lis331dl_dev_id);

arch/x86/platform/intel-mid/device_libs/platform_max7315.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_max7315.c: max7315 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <asm/intel-mid.h>
-
-#define MAX7315_NUM 2
-
-static void __init *max7315_platform_data(void *info)
-{
-	static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
-	static int nr;
-	struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
-	struct i2c_board_info *i2c_info = info;
-	int gpio_base, intr;
-	char base_pin_name[SFI_NAME_LEN + 1];
-	char intr_pin_name[SFI_NAME_LEN + 1];
-
-	if (nr == MAX7315_NUM) {
-		pr_err("too many max7315s, we only support %d\n",
-				MAX7315_NUM);
-		return NULL;
-	}
-	/* we have several max7315 on the board, we only need load several
-	 * instances of the same pca953x driver to cover them
-	 */
-	strcpy(i2c_info->type, "max7315");
-	if (nr++) {
-		snprintf(base_pin_name, sizeof(base_pin_name),
-			 "max7315_%d_base", nr);
-		snprintf(intr_pin_name, sizeof(intr_pin_name),
-			 "max7315_%d_int", nr);
-	} else {
-		strcpy(base_pin_name, "max7315_base");
-		strcpy(intr_pin_name, "max7315_int");
-	}
-
-	gpio_base = get_gpio_by_name(base_pin_name);
-	intr = get_gpio_by_name(intr_pin_name);
-
-	if (gpio_base < 0)
-		return NULL;
-	max7315->gpio_base = gpio_base;
-	if (intr != -1) {
-		i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-		max7315->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
-	} else {
-		i2c_info->irq = -1;
-		max7315->irq_base = -1;
-	}
-	return max7315;
-}
-
-static const struct devs_id max7315_dev_id __initconst = {
-	.name = "i2c_max7315",
-	.type = SFI_DEV_TYPE_I2C,
-	.delay = 1,
-	.get_platform_data = &max7315_platform_data,
-};
-
-static const struct devs_id max7315_2_dev_id __initconst = {
-	.name = "i2c_max7315_2",
-	.type = SFI_DEV_TYPE_I2C,
-	.delay = 1,
-	.get_platform_data = &max7315_platform_data,
-};
-
-sfi_device(max7315_dev_id);
-sfi_device(max7315_2_dev_id);

arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_mpu3050.c: mpu3050 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <asm/intel-mid.h>
-
-static void *mpu3050_platform_data(void *info)
-{
-	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("mpu3050_int");
-
-	if (intr < 0)
-		return NULL;
-
-	i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-	return NULL;
-}
-
-static const struct devs_id mpu3050_dev_id __initconst = {
-	.name = "mpu3050",
-	.type = SFI_DEV_TYPE_I2C,
-	.delay = 1,
-	.get_platform_data = &mpu3050_platform_data,
-};
-
-sfi_device(mpu3050_dev_id);

arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Merrifield FLIS platform device initialization file
- *
- * Copyright (C) 2016, Intel Corporation
- *
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/intel-mid.h>
-
-#define FLIS_BASE_ADDR			0xff0c0000
-#define FLIS_LENGTH			0x8000
-
-static struct resource mrfld_pinctrl_mmio_resource = {
-	.start		= FLIS_BASE_ADDR,
-	.end		= FLIS_BASE_ADDR + FLIS_LENGTH - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device mrfld_pinctrl_device = {
-	.name		= "pinctrl-merrifield",
-	.id		= PLATFORM_DEVID_NONE,
-	.resource	= &mrfld_pinctrl_mmio_resource,
-	.num_resources	= 1,
-};
-
-static int __init mrfld_pinctrl_init(void)
-{
-	if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
-		return platform_device_register(&mrfld_pinctrl_device);
-
-	return -ENODEV;
-}
-arch_initcall(mrfld_pinctrl_init);

arch/x86/platform/intel-mid/device_libs/platform_mrfld_rtc.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Merrifield legacy RTC initialization file
- *
- * (C) Copyright 2017 Intel Corporation
- *
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/init.h>
-
-#include <asm/hw_irq.h>
-#include <asm/intel-mid.h>
-#include <asm/io_apic.h>
-#include <asm/time.h>
-#include <asm/x86_init.h>
-
-static int __init mrfld_legacy_rtc_alloc_irq(void)
-{
-	struct irq_alloc_info info;
-	int ret;
-
-	if (!x86_platform.legacy.rtc)
-		return -ENODEV;
-
-	ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 1, 0);
-	ret = mp_map_gsi_to_irq(RTC_IRQ, IOAPIC_MAP_ALLOC, &info);
-	if (ret < 0) {
-		pr_info("Failed to allocate RTC interrupt. Disabling RTC\n");
-		x86_platform.legacy.rtc = 0;
-		return ret;
-	}
-
-	return 0;
-}
-
-static int __init mrfld_legacy_rtc_init(void)
-{
-	if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
-		return -ENODEV;
-
-	return mrfld_legacy_rtc_alloc_irq();
-}
-arch_initcall(mrfld_legacy_rtc_init);

arch/x86/platform/intel-mid/device_libs/platform_mrfld_sd.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SDHCI platform data initilisation file
- *
- * (C) Copyright 2016 Intel Corporation
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <linux/mmc/sdhci-pci-data.h>
-
-#include <asm/intel-mid.h>
-
-#define INTEL_MRFLD_SD			2
-#define INTEL_MRFLD_SD_CD_GPIO		77
-
-static struct sdhci_pci_data mrfld_sdhci_pci_data = {
-	.rst_n_gpio	= -EINVAL,
-	.cd_gpio	= INTEL_MRFLD_SD_CD_GPIO,
-};
-
-static struct sdhci_pci_data *
-mrfld_sdhci_pci_get_data(struct pci_dev *pdev, int slotno)
-{
-	unsigned int func = PCI_FUNC(pdev->devfn);
-
-	if (func == INTEL_MRFLD_SD)
-		return &mrfld_sdhci_pci_data;
-
-	return NULL;
-}
-
-static int __init mrfld_sd_init(void)
-{
-	if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
-		return -ENODEV;
-
-	sdhci_pci_get_data = mrfld_sdhci_pci_get_data;
-	return 0;
-}
-arch_initcall(mrfld_sd_init);

arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * spidev platform data initialization file
- *
- * (C) Copyright 2014, 2016 Intel Corporation
- * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- *	    Dan O'Donovan <dan@emutex.com>
- */
-
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/spi/spi.h>
-
-#include <asm/intel-mid.h>
-
-#define MRFLD_SPI_DEFAULT_DMA_BURST	8
-#define MRFLD_SPI_DEFAULT_TIMEOUT	500
-
-/* GPIO pin for spidev chipselect */
-#define MRFLD_SPIDEV_GPIO_CS		111
-
-static struct pxa2xx_spi_chip spidev_spi_chip = {
-	.dma_burst_size		= MRFLD_SPI_DEFAULT_DMA_BURST,
-	.timeout		= MRFLD_SPI_DEFAULT_TIMEOUT,
-	.gpio_cs		= MRFLD_SPIDEV_GPIO_CS,
-};
-
-static void __init *spidev_platform_data(void *info)
-{
-	struct spi_board_info *spi_info = info;
-
-	if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
-		return ERR_PTR(-ENODEV);
-
-	spi_info->mode = SPI_MODE_0;
-	spi_info->controller_data = &spidev_spi_chip;
-
-	return NULL;
-}
-
-static const struct devs_id spidev_dev_id __initconst = {
-	.name			= "spidev",
-	.type			= SFI_DEV_TYPE_SPI,
-	.delay			= 0,
-	.get_platform_data	= &spidev_platform_data,
-};
-
-sfi_device(spidev_dev_id);

arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PCAL9555a platform data initialization file
- *
- * Copyright (C) 2016, Intel Corporation
- *
- * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- *	    Dan O'Donovan <dan@emutex.com>
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/sfi.h>
-
-#include <asm/intel-mid.h>
-
-#define PCAL9555A_NUM	4
-
-static struct pca953x_platform_data pcal9555a_pdata[PCAL9555A_NUM];
-static int nr;
-
-static void __init *pcal9555a_platform_data(void *info)
-{
-	struct i2c_board_info *i2c_info = info;
-	char *type = i2c_info->type;
-	struct pca953x_platform_data *pcal9555a;
-	char base_pin_name[SFI_NAME_LEN + 1];
-	char intr_pin_name[SFI_NAME_LEN + 1];
-	int gpio_base, intr;
-
-	snprintf(base_pin_name, sizeof(base_pin_name), "%s_base", type);
-	snprintf(intr_pin_name, sizeof(intr_pin_name), "%s_int", type);
-
-	gpio_base = get_gpio_by_name(base_pin_name);
-	intr = get_gpio_by_name(intr_pin_name);
-
-	/* Check if the SFI record valid */
-	if (gpio_base == -1)
-		return NULL;
-
-	if (nr >= PCAL9555A_NUM) {
-		pr_err("%s: Too many instances, only %d supported\n", __func__,
-		       PCAL9555A_NUM);
-		return NULL;
-	}
-
-	pcal9555a = &pcal9555a_pdata[nr++];
-	pcal9555a->gpio_base = gpio_base;
-
-	if (intr >= 0) {
-		i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-		pcal9555a->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
-	} else {
-		i2c_info->irq = -1;
-		pcal9555a->irq_base = -1;
-	}
-
-	strcpy(type, "pcal9555a");
-	return pcal9555a;
-}
-
-static const struct devs_id pcal9555a_1_dev_id __initconst = {
-	.name			= "pcal9555a-1",
-	.type			= SFI_DEV_TYPE_I2C,
-	.delay			= 1,
-	.get_platform_data	= &pcal9555a_platform_data,
-};
-
-static const struct devs_id pcal9555a_2_dev_id __initconst = {
-	.name			= "pcal9555a-2",
-	.type			= SFI_DEV_TYPE_I2C,
-	.delay			= 1,
-	.get_platform_data	= &pcal9555a_platform_data,
-};
-
-static const struct devs_id pcal9555a_3_dev_id __initconst = {
-	.name			= "pcal9555a-3",
-	.type			= SFI_DEV_TYPE_I2C,
-	.delay			= 1,
-	.get_platform_data	= &pcal9555a_platform_data,
-};
-
-static const struct devs_id pcal9555a_4_dev_id __initconst = {
-	.name			= "pcal9555a-4",
-	.type			= SFI_DEV_TYPE_I2C,
-	.delay			= 1,
-	.get_platform_data	= &pcal9555a_platform_data,
-};
-
-sfi_device(pcal9555a_1_dev_id);
-sfi_device(pcal9555a_2_dev_id);
-sfi_device(pcal9555a_3_dev_id);
-sfi_device(pcal9555a_4_dev_id);

arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_tc35876x.c: tc35876x platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/gpio/machine.h>
-#include <asm/intel-mid.h>
-
-static struct gpiod_lookup_table tc35876x_gpio_table = {
-	.dev_id	= "i2c_disp_brig",
-	.table	= {
-		GPIO_LOOKUP("0000:00:0c.0", -1, "bridge-reset", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("0000:00:0c.0", -1, "bl-en", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("0000:00:0c.0", -1, "vadd", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*tc35876x DSI_LVDS bridge chip and panel platform data*/
-static void *tc35876x_platform_data(void *data)
-{
-	struct gpiod_lookup_table *table = &tc35876x_gpio_table;
-	struct gpiod_lookup *lookup = table->table;
-
-	lookup[0].chip_hwnum = get_gpio_by_name("LCMB_RXEN");
-	lookup[1].chip_hwnum = get_gpio_by_name("6S6P_BL_EN");
-	lookup[2].chip_hwnum = get_gpio_by_name("EN_VREG_LCD_V3P3");
-	gpiod_add_lookup_table(table);
-
-	return NULL;
-}
-
-static const struct devs_id tc35876x_dev_id __initconst = {
-	.name = "i2c_disp_brig",
-	.type = SFI_DEV_TYPE_I2C,
-	.get_platform_data = &tc35876x_platform_data,
-};
-
-sfi_device(tc35876x_dev_id);

arch/x86/platform/intel-mid/device_libs/platform_tca6416.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_tca6416.c: tca6416 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/platform_data/pca953x.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <asm/intel-mid.h>
-
-#define TCA6416_NAME	"tca6416"
-#define TCA6416_BASE	"tca6416_base"
-#define TCA6416_INTR	"tca6416_int"
-
-static void *tca6416_platform_data(void *info)
-{
-	static struct pca953x_platform_data tca6416;
-	struct i2c_board_info *i2c_info = info;
-	int gpio_base, intr;
-	char base_pin_name[SFI_NAME_LEN + 1];
-	char intr_pin_name[SFI_NAME_LEN + 1];
-
-	strcpy(i2c_info->type, TCA6416_NAME);
-	strcpy(base_pin_name, TCA6416_BASE);
-	strcpy(intr_pin_name, TCA6416_INTR);
-
-	gpio_base = get_gpio_by_name(base_pin_name);
-	intr = get_gpio_by_name(intr_pin_name);
-
-	if (gpio_base < 0)
-		return NULL;
-	tca6416.gpio_base = gpio_base;
-	if (intr >= 0) {
-		i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
-		tca6416.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
-	} else {
-		i2c_info->irq = -1;
-		tca6416.irq_base = -1;
-	}
-	return &tca6416;
-}
-
-static const struct devs_id tca6416_dev_id __initconst = {
-	.name = "tca6416",
-	.type = SFI_DEV_TYPE_I2C,
-	.delay = 1,
-	.get_platform_data = &tca6416_platform_data,
-};
-
-sfi_device(tca6416_dev_id);

arch/x86/platform/intel-mid/intel-mid.c

@@ -14,7 +14,6 @@
 #include <linux/interrupt.h>
 #include <linux/regulator/machine.h>
 #include <linux/scatterlist.h>
-#include <linux/sfi.h>
 #include <linux/irq.h>
 #include <linux/export.h>
 #include <linux/notifier.h>

arch/x86/platform/sfi/Makefile

-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_SFI)		+= sfi.o

arch/x86/platform/sfi/sfi.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sfi.c - x86 architecture SFI support.
- *
- * Copyright (c) 2009, Intel Corporation.
- */
-
-#define KMSG_COMPONENT "SFI"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/acpi.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/io.h>
-
-#include <asm/irqdomain.h>
-#include <asm/io_apic.h>
-#include <asm/mpspec.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-
-#ifdef CONFIG_X86_LOCAL_APIC
-static unsigned long sfi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
-
-/* All CPUs enumerated by SFI must be present and enabled */
-static void __init mp_sfi_register_lapic(u8 id)
-{
-	if (MAX_LOCAL_APIC - id <= 0) {
-		pr_warn("Processor #%d invalid (max %d)\n", id, MAX_LOCAL_APIC);
-		return;
-	}
-
-	pr_info("registering lapic[%d]\n", id);
-
-	generic_processor_info(id, GET_APIC_VERSION(apic_read(APIC_LVR)));
-}
-
-static int __init sfi_parse_cpus(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_cpu_table_entry *pentry;
-	int i;
-	int cpu_num;
-
-	sb = (struct sfi_table_simple *)table;
-	cpu_num = SFI_GET_NUM_ENTRIES(sb, struct sfi_cpu_table_entry);
-	pentry = (struct sfi_cpu_table_entry *)sb->pentry;
-
-	for (i = 0; i < cpu_num; i++) {
-		mp_sfi_register_lapic(pentry->apic_id);
-		pentry++;
-	}
-
-	smp_found_config = 1;
-	return 0;
-}
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-#ifdef CONFIG_X86_IO_APIC
-
-static int __init sfi_parse_ioapic(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_apic_table_entry *pentry;
-	int i, num;
-	struct ioapic_domain_cfg cfg = {
-		.type = IOAPIC_DOMAIN_STRICT,
-		.ops = &mp_ioapic_irqdomain_ops,
-	};
-
-	sb = (struct sfi_table_simple *)table;
-	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_apic_table_entry);
-	pentry = (struct sfi_apic_table_entry *)sb->pentry;
-
-	for (i = 0; i < num; i++) {
-		mp_register_ioapic(i, pentry->phys_addr, gsi_top, &cfg);
-		pentry++;
-	}
-
-	WARN(pic_mode, KERN_WARNING
-		"SFI: pic_mod shouldn't be 1 when IOAPIC table is present\n");
-	pic_mode = 0;
-	return 0;
-}
-#endif /* CONFIG_X86_IO_APIC */
-
-/*
- * sfi_platform_init(): register lapics & io-apics
- */
-int __init sfi_platform_init(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
-	register_lapic_address(sfi_lapic_addr);
-	sfi_table_parse(SFI_SIG_CPUS, NULL, NULL, sfi_parse_cpus);
-#endif
-#ifdef CONFIG_X86_IO_APIC
-	sfi_table_parse(SFI_SIG_APIC, NULL, NULL, sfi_parse_ioapic);
-#endif
-	return 0;
-}

drivers/Makefile

@@ -27,7 +27,7 @@ obj-y				+= idle/
 obj-y				+= char/ipmi/
 
 obj-$(CONFIG_ACPI)		+= acpi/
-obj-$(CONFIG_SFI)		+= sfi/
+
 # PnP must come after ACPI since it will eventually need to check if acpi
 # was used and do nothing if so
 obj-$(CONFIG_PNP)		+= pnp/

drivers/platform/x86/intel_scu_pcidrv.c

@@ -17,7 +17,6 @@
 static int intel_scu_pci_probe(struct pci_dev *pdev,
 			       const struct pci_device_id *id)
 {
-	void (*setup_fn)(void) = (void (*)(void))id->driver_data;
 	struct intel_scu_ipc_data scu_data = {};
 	struct intel_scu_ipc_dev *scu;
 	int ret;
@@ -30,27 +29,14 @@ static int intel_scu_pci_probe(struct pci_dev *pdev,
 	scu_data.irq = pdev->irq;
 
 	scu = intel_scu_ipc_register(&pdev->dev, &scu_data);
-	if (IS_ERR(scu))
-		return PTR_ERR(scu);
-
-	if (setup_fn)
-		setup_fn();
-	return 0;
-}
-
-static void intel_mid_scu_setup(void)
-{
-	intel_scu_devices_create();
+	return PTR_ERR_OR_ZERO(scu);
 }
 
 static const struct pci_device_id pci_ids[] = {
-	{ PCI_VDEVICE(INTEL, 0x080e),
-	  .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
-	{ PCI_VDEVICE(INTEL, 0x08ea),
-	  .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
+	{ PCI_VDEVICE(INTEL, 0x080e) },
+	{ PCI_VDEVICE(INTEL, 0x08ea) },
 	{ PCI_VDEVICE(INTEL, 0x0a94) },
-	{ PCI_VDEVICE(INTEL, 0x11a0),
-	  .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
+	{ PCI_VDEVICE(INTEL, 0x11a0) },
 	{ PCI_VDEVICE(INTEL, 0x1a94) },
 	{ PCI_VDEVICE(INTEL, 0x5a94) },
 	{}

drivers/sfi/Kconfig

-# SPDX-License-Identifier: GPL-2.0-only
-#
-# SFI Configuration
-#
-
-menuconfig SFI
-	bool "SFI (Simple Firmware Interface) Support"
-	help
-	The Simple Firmware Interface (SFI) provides a lightweight method
-	for platform firmware to pass information to the operating system
-	via static tables in memory.  Kernel SFI support is required to
-	boot on SFI-only platforms.  Currently, all SFI-only platforms are
-	based on the 2nd generation Intel Atom processor platform,
-	code-named Moorestown.
-
-	For more information, see http://simplefirmware.org
-
-	Say 'Y' here to enable the kernel to boot on SFI-only platforms.

drivers/sfi/Makefile

-# SPDX-License-Identifier: GPL-2.0-only
-obj-y	+= sfi_acpi.o
-obj-y	+= sfi_core.o
-

drivers/sfi/sfi_acpi.c

-/* sfi_acpi.c Simple Firmware Interface - ACPI extensions */
-
-/*
-
-  This file is provided under a dual BSD/GPLv2 license.  When using or
-  redistributing this file, you may do so under either license.
-
-  GPL LICENSE SUMMARY
-
-  Copyright(c) 2009 Intel Corporation. All rights reserved.
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
-  This program is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-  The full GNU General Public License is included in this distribution
-  in the file called LICENSE.GPL.
-
-  BSD LICENSE
-
-  Copyright(c) 2009 Intel Corporation. All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-    * Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in
-      the documentation and/or other materials provided with the
-      distribution.
-    * Neither the name of Intel Corporation nor the names of its
-      contributors may be used to endorse or promote products derived
-      from this software without specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#define KMSG_COMPONENT "SFI"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/sfi_acpi.h>
-#include "sfi_core.h"
-
-/*
- * SFI can access ACPI-defined tables via an optional ACPI XSDT.
- *
- * This allows re-use, and avoids re-definition, of standard tables.
- * For example, the "MCFG" table is defined by PCI, reserved by ACPI,
- * and is expected to be present many SFI-only systems.
- */
-
-static struct acpi_table_xsdt *xsdt_va __read_mostly;
-
-#define XSDT_GET_NUM_ENTRIES(ptable, entry_type) \
-	((ptable->header.length - sizeof(struct acpi_table_header)) / \
-	(sizeof(entry_type)))
-
-static inline struct sfi_table_header *acpi_to_sfi_th(
-				struct acpi_table_header *th)
-{
-	return (struct sfi_table_header *)th;
-}
-
-static inline struct acpi_table_header *sfi_to_acpi_th(
-				struct sfi_table_header *th)
-{
-	return (struct acpi_table_header *)th;
-}
-
-/*
- * sfi_acpi_parse_xsdt()
- *
- * Parse the ACPI XSDT for later access by sfi_acpi_table_parse().
- */
-static int __init sfi_acpi_parse_xsdt(struct sfi_table_header *th)
-{
-	struct sfi_table_key key = SFI_ANY_KEY;
-	int tbl_cnt, i;
-	void *ret;
-
-	xsdt_va = (struct acpi_table_xsdt *)th;
-	tbl_cnt = XSDT_GET_NUM_ENTRIES(xsdt_va, u64);
-	for (i = 0; i < tbl_cnt; i++) {
-		ret = sfi_check_table(xsdt_va->table_offset_entry[i], &key);
-		if (IS_ERR(ret)) {
-			disable_sfi();
-			return -1;
-		}
-	}
-
-	return 0;
-}
-
-int __init sfi_acpi_init(void)
-{
-	struct sfi_table_key xsdt_key = { .sig = SFI_SIG_XSDT };
-
-	sfi_table_parse(SFI_SIG_XSDT, NULL, NULL, sfi_acpi_parse_xsdt);
-
-	/* Only call the get_table to keep the table mapped */
-	xsdt_va = (struct acpi_table_xsdt *)sfi_get_table(&xsdt_key);
-	return 0;
-}
-
-static struct acpi_table_header *sfi_acpi_get_table(struct sfi_table_key *key)
-{
-	u32 tbl_cnt, i;
-	void *ret;
-
-	tbl_cnt = XSDT_GET_NUM_ENTRIES(xsdt_va, u64);
-	for (i = 0; i < tbl_cnt; i++) {
-		ret = sfi_check_table(xsdt_va->table_offset_entry[i], key);
-		if (!IS_ERR(ret) && ret)
-			return sfi_to_acpi_th(ret);
-	}
-
-	return NULL;
-}
-
-static void sfi_acpi_put_table(struct acpi_table_header *table)
-{
-	sfi_put_table(acpi_to_sfi_th(table));
-}
-
-/*
- * sfi_acpi_table_parse()
- *
- * Find specified table in XSDT, run handler on it and return its return value
- */
-int sfi_acpi_table_parse(char *signature, char *oem_id, char *oem_table_id,
-			int(*handler)(struct acpi_table_header *))
-{
-	struct acpi_table_header *table = NULL;
-	struct sfi_table_key key;
-	int ret = 0;
-
-	if (sfi_disabled)
-		return -1;
-
-	key.sig = signature;
-	key.oem_id = oem_id;
-	key.oem_table_id = oem_table_id;
-
-	table = sfi_acpi_get_table(&key);
-	if (!table)
-		return -EINVAL;
-
-	ret = handler(table);
-	sfi_acpi_put_table(table);
-	return ret;
-}
-
-static ssize_t sfi_acpi_table_show(struct file *filp, struct kobject *kobj,
-			       struct bin_attribute *bin_attr, char *buf,
-			       loff_t offset, size_t count)
-{
-	struct sfi_table_attr *tbl_attr =
-	    container_of(bin_attr, struct sfi_table_attr, attr);
-	struct acpi_table_header *th = NULL;
-	struct sfi_table_key key;
-	ssize_t cnt;
-
-	key.sig = tbl_attr->name;
-	key.oem_id = NULL;
-	key.oem_table_id = NULL;
-
-	th = sfi_acpi_get_table(&key);
-	if (!th)
-		return 0;
-
-	cnt =  memory_read_from_buffer(buf, count, &offset,
-					th, th->length);
-	sfi_acpi_put_table(th);
-
-	return cnt;
-}
-
-
-void __init sfi_acpi_sysfs_init(void)
-{
-	u32 tbl_cnt, i;
-	struct sfi_table_attr *tbl_attr;
-
-	tbl_cnt = XSDT_GET_NUM_ENTRIES(xsdt_va, u64);
-	for (i = 0; i < tbl_cnt; i++) {
-		tbl_attr =
-			sfi_sysfs_install_table(xsdt_va->table_offset_entry[i]);
-		tbl_attr->attr.read = sfi_acpi_table_show;
-	}
-
-	return;
-}

drivers/sfi/sfi_core.h

-/* sfi_core.h Simple Firmware Interface, internal header */
-
-/*
-
-  This file is provided under a dual BSD/GPLv2 license.  When using or
-  redistributing this file, you may do so under either license.
-
-  GPL LICENSE SUMMARY
-
-  Copyright(c) 2009 Intel Corporation. All rights reserved.
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
-  This program is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-  The full GNU General Public License is included in this distribution
-  in the file called LICENSE.GPL.
-
-  BSD LICENSE
-
-  Copyright(c) 2009 Intel Corporation. All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-    * Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in
-      the documentation and/or other materials provided with the
-      distribution.
-    * Neither the name of Intel Corporation nor the names of its
-      contributors may be used to endorse or promote products derived
-      from this software without specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#include <linux/sysfs.h>
-
-struct sfi_table_key{
-	char	*sig;
-	char	*oem_id;
-	char	*oem_table_id;
-};
-
-/* sysfs interface */
-struct sfi_table_attr {
-	struct bin_attribute attr;
-	char name[8];
-};
-
-#define SFI_ANY_KEY { .sig = NULL, .oem_id = NULL, .oem_table_id = NULL }
-
-extern int __init sfi_acpi_init(void);
-extern  struct sfi_table_header *sfi_check_table(u64 paddr,
-					struct sfi_table_key *key);
-struct sfi_table_header *sfi_get_table(struct sfi_table_key *key);
-extern void sfi_put_table(struct sfi_table_header *table);
-extern struct sfi_table_attr __init *sfi_sysfs_install_table(u64 pa);
-extern void __init sfi_acpi_sysfs_init(void);

include/linux/sfi.h

-/* sfi.h Simple Firmware Interface */
-
-/*
-
-  This file is provided under a dual BSD/GPLv2 license.  When using or
-  redistributing this file, you may do so under either license.
-
-  GPL LICENSE SUMMARY
-
-  Copyright(c) 2009 Intel Corporation. All rights reserved.
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
-  This program is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-  The full GNU General Public License is included in this distribution
-  in the file called LICENSE.GPL.
-
-  BSD LICENSE
-
-  Copyright(c) 2009 Intel Corporation. All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-    * Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in
-      the documentation and/or other materials provided with the
-      distribution.
-    * Neither the name of Intel Corporation nor the names of its
-      contributors may be used to endorse or promote products derived
-      from this software without specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef _LINUX_SFI_H
-#define _LINUX_SFI_H
-
-#include <linux/init.h>
-#include <linux/types.h>
-
-/* Table signatures reserved by the SFI specification */
-#define SFI_SIG_SYST		"SYST"
-#define SFI_SIG_FREQ		"FREQ"
-#define SFI_SIG_IDLE		"IDLE"
-#define SFI_SIG_CPUS		"CPUS"
-#define SFI_SIG_MTMR		"MTMR"
-#define SFI_SIG_MRTC		"MRTC"
-#define SFI_SIG_MMAP		"MMAP"
-#define SFI_SIG_APIC		"APIC"
-#define SFI_SIG_XSDT		"XSDT"
-#define SFI_SIG_WAKE		"WAKE"
-#define SFI_SIG_DEVS		"DEVS"
-#define SFI_SIG_GPIO		"GPIO"
-
-#define SFI_SIGNATURE_SIZE	4
-#define SFI_OEM_ID_SIZE		6
-#define SFI_OEM_TABLE_ID_SIZE	8
-
-#define SFI_NAME_LEN		16
-
-#define SFI_SYST_SEARCH_BEGIN		0x000E0000
-#define SFI_SYST_SEARCH_END		0x000FFFFF
-
-#define SFI_GET_NUM_ENTRIES(ptable, entry_type) \
-	((ptable->header.len - sizeof(struct sfi_table_header)) / \
-	(sizeof(entry_type)))
-/*
- * Table structures must be byte-packed to match the SFI specification,
- * as they are provided by the BIOS.
- */
-struct sfi_table_header {
-	char	sig[SFI_SIGNATURE_SIZE];
-	u32	len;
-	u8	rev;
-	u8	csum;
-	char	oem_id[SFI_OEM_ID_SIZE];
-	char	oem_table_id[SFI_OEM_TABLE_ID_SIZE];
-} __packed;
-
-struct sfi_table_simple {
-	struct sfi_table_header		header;
-	u64				pentry[1];
-} __packed;
-
-/* Comply with UEFI spec 2.1 */
-struct sfi_mem_entry {
-	u32	type;
-	u64	phys_start;
-	u64	virt_start;
-	u64	pages;
-	u64	attrib;
-} __packed;
-
-struct sfi_cpu_table_entry {
-	u32	apic_id;
-} __packed;
-
-struct sfi_cstate_table_entry {
-	u32	hint;		/* MWAIT hint */
-	u32	latency;	/* latency in ms */
-} __packed;
-
-struct sfi_apic_table_entry {
-	u64	phys_addr;	/* phy base addr for APIC reg */
-} __packed;
-
-struct sfi_freq_table_entry {
-	u32	freq_mhz;	/* in MHZ */
-	u32	latency;	/* transition latency in ms */
-	u32	ctrl_val;	/* value to write to PERF_CTL */
-} __packed;
-
-struct sfi_wake_table_entry {
-	u64	phys_addr;	/* pointer to where the wake vector locates */
-} __packed;
-
-struct sfi_timer_table_entry {
-	u64	phys_addr;	/* phy base addr for the timer */
-	u32	freq_hz;	/* in HZ */
-	u32	irq;
-} __packed;
-
-struct sfi_rtc_table_entry {
-	u64	phys_addr;	/* phy base addr for the RTC */
-	u32	irq;
-} __packed;
-
-struct sfi_device_table_entry {
-	u8	type;		/* bus type, I2C, SPI or ...*/
-#define SFI_DEV_TYPE_SPI	0
-#define SFI_DEV_TYPE_I2C	1
-#define SFI_DEV_TYPE_UART	2
-#define SFI_DEV_TYPE_HSI	3
-#define SFI_DEV_TYPE_IPC	4
-#define SFI_DEV_TYPE_SD		5
-
-	u8	host_num;	/* attached to host 0, 1...*/
-	u16	addr;
-	u8	irq;
-	u32	max_freq;
-	char	name[SFI_NAME_LEN];
-} __packed;
-
-struct sfi_gpio_table_entry {
-	char	controller_name[SFI_NAME_LEN];
-	u16	pin_no;
-	char	pin_name[SFI_NAME_LEN];
-} __packed;
-
-typedef int (*sfi_table_handler) (struct sfi_table_header *table);
-
-#ifdef CONFIG_SFI
-extern void __init sfi_init(void);
-extern int __init sfi_platform_init(void);
-extern void __init sfi_init_late(void);
-extern int sfi_table_parse(char *signature, char *oem_id, char *oem_table_id,
-				sfi_table_handler handler);
-
-extern int sfi_disabled;
-static inline void disable_sfi(void)
-{
-	sfi_disabled = 1;
-}
-
-#else /* !CONFIG_SFI */
-
-static inline void sfi_init(void)
-{
-}
-
-static inline void sfi_init_late(void)
-{
-}
-
-#define sfi_disabled	0
-
-static inline int sfi_table_parse(char *signature, char *oem_id,
-					char *oem_table_id,
-					sfi_table_handler handler)
-{
-	return -1;
-}
-
-#endif /* !CONFIG_SFI */
-
-#endif /*_LINUX_SFI_H*/

include/linux/sfi_acpi.h

-/* sfi.h Simple Firmware Interface */
-
-/*
-
-  This file is provided under a dual BSD/GPLv2 license.  When using or
-  redistributing this file, you may do so under either license.
-
-  GPL LICENSE SUMMARY
-
-  Copyright(c) 2009 Intel Corporation. All rights reserved.
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
-  This program is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-  The full GNU General Public License is included in this distribution
-  in the file called LICENSE.GPL.
-
-  BSD LICENSE
-
-  Copyright(c) 2009 Intel Corporation. All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-    * Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in
-      the documentation and/or other materials provided with the
-      distribution.
-    * Neither the name of Intel Corporation nor the names of its
-      contributors may be used to endorse or promote products derived
-      from this software without specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef _LINUX_SFI_ACPI_H
-#define _LINUX_SFI_ACPI_H
-
-#include <linux/acpi.h>
-#include <linux/sfi.h>
-
-#ifdef CONFIG_SFI
-extern int sfi_acpi_table_parse(char *signature, char *oem_id,
-				char *oem_table_id,
-				int (*handler)(struct acpi_table_header *));
-
-static inline int __init acpi_sfi_table_parse(char *signature,
-				int (*handler)(struct acpi_table_header *))
-{
-	if (!acpi_table_parse(signature, handler))
-		return 0;
-
-	return sfi_acpi_table_parse(signature, NULL, NULL, handler);
-}
-#else /* !CONFIG_SFI */
-static inline int sfi_acpi_table_parse(char *signature, char *oem_id,
-				char *oem_table_id,
-				int (*handler)(struct acpi_table_header *))
-{
-	return -1;
-}
-
-static inline int __init acpi_sfi_table_parse(char *signature,
-				int (*handler)(struct acpi_table_header *))
-{
-	return acpi_table_parse(signature, handler);
-}
-#endif /* !CONFIG_SFI */
-
-#endif /*_LINUX_SFI_ACPI_H*/

init/main.c

@@ -74,7 +74,6 @@
 #include <linux/kgdb.h>
 #include <linux/ftrace.h>
 #include <linux/async.h>
-#include <linux/sfi.h>
 #include <linux/shmem_fs.h>
 #include <linux/slab.h>
 #include <linux/perf_event.h>
@@ -1054,7 +1053,6 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void)
 
 	acpi_subsystem_init();
 	arch_post_acpi_subsys_init();
-	sfi_init_late();
 	kcsan_init();
 
 	/* Do the rest non-__init'ed, we're now alive */