ASoC: qcom: apq8016_sbc: Map missing jack kcontrols

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. It seems to support
detecting Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-20-alpernebiyasak@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/qcom/apq8016_sbc.c

@@ -44,6 +44,17 @@ struct apq8016_sbc_data {
 #define DEFAULT_MCLK_RATE		9600000
 #define MI2S_BCLK_RATE			1536000
 
+static struct snd_soc_jack_pin apq8016_sbc_jack_pins[] = {
+	{
+		.pin = "Mic Jack",
+		.mask = SND_JACK_MICROPHONE,
+	},
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+};
+
 static int apq8016_dai_init(struct snd_soc_pcm_runtime *rtd, int mi2s)
 {
 	struct snd_soc_dai *codec_dai;
@@ -90,13 +101,15 @@ static int apq8016_dai_init(struct snd_soc_pcm_runtime *rtd, int mi2s)
 	if (!pdata->jack_setup) {
 		struct snd_jack *jack;
 
-		rval = snd_soc_card_jack_new(card, "Headset Jack",
-					     SND_JACK_HEADSET |
-					     SND_JACK_HEADPHONE |
-					     SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-					     SND_JACK_BTN_2 | SND_JACK_BTN_3 |
-					     SND_JACK_BTN_4,
-					     &pdata->jack);
+		rval = snd_soc_card_jack_new_pins(card, "Headset Jack",
+						  SND_JACK_HEADSET |
+						  SND_JACK_HEADPHONE |
+						  SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+						  SND_JACK_BTN_2 | SND_JACK_BTN_3 |
+						  SND_JACK_BTN_4,
+						  &pdata->jack,
+						  apq8016_sbc_jack_pins,
+						  ARRAY_SIZE(apq8016_sbc_jack_pins));
 
 		if (rval < 0) {
 			dev_err(card->dev, "Unable to add Headphone Jack\n");
@@ -255,8 +268,14 @@ static void msm8916_qdsp6_add_ops(struct snd_soc_card *card)
 	}
 }
 
-static const struct snd_soc_dapm_widget apq8016_sbc_dapm_widgets[] = {
+static const struct snd_kcontrol_new apq8016_sbc_snd_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Mic Jack"),
+};
 
+static const struct snd_soc_dapm_widget apq8016_sbc_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
 	SND_SOC_DAPM_MIC("Handset Mic", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_MIC("Secondary Mic", NULL),
@@ -285,6 +304,8 @@ static int apq8016_sbc_platform_probe(struct platform_device *pdev)
 	card->owner = THIS_MODULE;
 	card->dapm_widgets = apq8016_sbc_dapm_widgets;
 	card->num_dapm_widgets = ARRAY_SIZE(apq8016_sbc_dapm_widgets);
+	card->controls = apq8016_sbc_snd_controls;
+	card->num_controls = ARRAY_SIZE(apq8016_sbc_snd_controls);
 
 	ret = qcom_snd_parse_of(card);
 	if (ret)