ARM: dts: uniphier: Add USB3 controller nodes

Add USB3 controller nodes including usb-core, resets, regulator, ss-phy
and hs-phy. This supports for Pro4, PXs2 and the boards.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

arch/arm/boot/dts/uniphier-ld6b-ref.dts

@@ -80,6 +80,14 @@ ethphy: ethphy@0 {
 	};
 };
 
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
 &nand {
 	status = "okay";
 };

arch/arm/boot/dts/uniphier-pro4-ace.dts

@@ -90,3 +90,11 @@ ethphy: ethphy@1 {
 		reg = <1>;
 	};
 };
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};

arch/arm/boot/dts/uniphier-pro4-ref.dts

@@ -88,6 +88,14 @@ ethphy: ethphy@0 {
 	};
 };
 
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
 &nand {
 	status = "okay";
 };

arch/arm/boot/dts/uniphier-pro4-sanji.dts

@@ -85,3 +85,11 @@ ethphy: ethphy@1 {
 		reg = <1>;
 	};
 };
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};

arch/arm/boot/dts/uniphier-pro4.dtsi

@@ -445,6 +445,100 @@ mdio: mdio {
 			};
 		};
 
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 134 4>, <0 135 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 4>;
+			phys = <&usb0_ssphy>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x100>;
+
+			usb0_vbus: regulator@0 {
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
+				reg = <0 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_ssphy: ss-phy@10 {
+				compatible = "socionext,uniphier-pro4-usb3-ssphy";
+				reg = <0x10 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus>;
+			};
+
+			usb0_rst: reset@40 {
+				compatible = "socionext,uniphier-pro4-usb3-reset";
+				reg = <0x40 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 137 4>, <0 138 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb1_rst 4>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x100>;
+
+			usb1_vbus: regulator@0 {
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
+				reg = <0 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_rst: reset@40 {
+				compatible = "socionext,uniphier-pro4-usb3-reset";
+				reg = <0x40 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+		};
+
 		nand: nand@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5a";
 			status = "disabled";

arch/arm/boot/dts/uniphier-pxs2-gentil.dts

@@ -90,3 +90,11 @@ ethphy: ethphy@1 {
 		reg = <1>;
 	};
 };
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};

arch/arm/boot/dts/uniphier-pxs2-vodka.dts

@@ -91,3 +91,7 @@ ethphy: ethphy@1 {
 		reg = <1>;
 	};
 };
+
+&usb0 {
+	status = "okay";
+};

arch/arm/boot/dts/uniphier-pxs2.dtsi

@@ -579,6 +579,186 @@ mdio: mdio {
 			};
 		};
 
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 134 4>, <0 135 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+			       <&usb0_ssphy0>, <&usb0_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs2-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+
+			usb0_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy1: ss-phy@310 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 18>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 137 4>, <0 138 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs2-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 20>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+
+			usb1_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 20>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus1>;
+			};
+
+			usb1_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 21>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 21>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
 		nand: nand@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";