ARM: dts: omap3/4: remove unneeded unit name for gpio-keys nodes

This patch fixes the following DTC warnings for many boards:

"Node /gpio_keys/button0@10 has a unit name, but no reg property"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/omap3-overo-alto35-common.dtsi

@@ -44,7 +44,7 @@ gpio_keys {
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&button_pins>;
-		button0@10 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */

arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi

@@ -37,13 +37,13 @@ gpio_keys {
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */

arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi

@@ -37,13 +37,13 @@ gpio_keys {
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */

arch/arm/boot/dts/omap3-overo-palo35-common.dtsi

@@ -37,13 +37,13 @@ gpio_keys {
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */

arch/arm/boot/dts/omap3-overo-palo43-common.dtsi

@@ -37,13 +37,13 @@ gpio_keys {
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */

arch/arm/boot/dts/omap4-duovero-parlor.dts

@@ -32,7 +32,7 @@ gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@121 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */