Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (39 commits)
  USB: at91-ohci, handle extra at91sam9261 ahb clock
  USB: another id for cp2101 driver
  USB: ueagle-atm.c needs sched.h
  USB: at91_udc, shrink runtime footprint
  usbnet: add missing Kconfig for KC2190 cables
  usbnet: init fault (oops) cleanup, whitespace fixes
  usbnet: recognize SiteCom CN-124
  usb: Remove Airprime device from option.c
  USB: change __init to __devinit for isp116x_probe
  USB: ps3: don't call ps3_system_bus_driver_register on other platforms
  USB: hid-core.c: Removes GTCO CalComp Interwrite IPanel PIDs from blacklist
  USB: kernel-doc fixes
  USB: quirky device for cdc-acm
  USB: cdc-acm: fix incorrect throtteling, make set_control optional
  USB: unconfigure devices which have config 0
  USB: make usb_iso_packet_descriptor.status signed
  USB: fix g_serial small error
  USB: use __u32 rather than u32 in userspace ioctls in usbdevice_fs.h
  USB Storage: US_FL_IGNORE_RESIDUE needed for Aiptek MP3 Player
  USB: Fix misspelled "USBNET_MII" kernel config option.
  ...

drivers/scsi/sd.c

@@ -1269,9 +1269,18 @@ sd_read_capacity(struct scsi_disk *sdkp, char *diskname,
 
 	/* Some devices return the total number of sectors, not the
 	 * highest sector number.  Make the necessary adjustment. */
-	if (sdp->fix_capacity)
+	if (sdp->fix_capacity) {
 		--sdkp->capacity;
 
+	/* Some devices have version which report the correct sizes
+	 * and others which do not. We guess size according to a heuristic
+	 * and err on the side of lowering the capacity. */
+	} else {
+		if (sdp->guess_capacity)
+			if (sdkp->capacity & 0x01) /* odd sizes are odd */
+				--sdkp->capacity;
+	}
+
 got_data:
 	if (sector_size == 0) {
 		sector_size = 512;

drivers/usb/Makefile

@@ -51,6 +51,7 @@ obj-$(CONFIG_USB_SERIAL)	+= serial/
 obj-$(CONFIG_USB_ADUTUX)	+= misc/
 obj-$(CONFIG_USB_APPLEDISPLAY)	+= misc/
 obj-$(CONFIG_USB_AUERSWALD)	+= misc/
+obj-$(CONFIG_USB_BERRY_CHARGE)	+= misc/
 obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/
 obj-$(CONFIG_USB_CYTHERM)	+= misc/
 obj-$(CONFIG_USB_EMI26)		+= misc/

drivers/usb/atm/ueagle-atm.c

@@ -61,6 +61,7 @@
 #include <linux/usb.h>
 #include <linux/firmware.h>
 #include <linux/ctype.h>
+#include <linux/sched.h>
 #include <linux/kthread.h>
 #include <linux/version.h>
 #include <linux/mutex.h>

drivers/usb/class/cdc-acm.c

@@ -326,10 +326,16 @@ static void acm_rx_tasklet(unsigned long _acm)
 	struct tty_struct *tty = acm->tty;
 	struct acm_ru *rcv;
 	unsigned long flags;
-	int i = 0;
+	unsigned char throttled;
 	dbg("Entering acm_rx_tasklet");
 
-	if (!ACM_READY(acm) || acm->throttle)
+	if (!ACM_READY(acm))
+		return;
+
+	spin_lock(&acm->throttle_lock);
+	throttled = acm->throttle;
+	spin_unlock(&acm->throttle_lock);
+	if (throttled)
 		return;
 
 next_buffer:
@@ -346,22 +352,20 @@ static void acm_rx_tasklet(unsigned long _acm)
 	dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
 
 	tty_buffer_request_room(tty, buf->size);
-	if (!acm->throttle)
+	spin_lock(&acm->throttle_lock);
+	throttled = acm->throttle;
+	spin_unlock(&acm->throttle_lock);
+	if (!throttled)
 		tty_insert_flip_string(tty, buf->base, buf->size);
 	tty_flip_buffer_push(tty);
 
-	spin_lock(&acm->throttle_lock);
-	if (acm->throttle) {
-		dbg("Throtteling noticed");
-		memmove(buf->base, buf->base + i, buf->size - i);
-		buf->size -= i;
-		spin_unlock(&acm->throttle_lock);
+	if (throttled) {
+		dbg("Throttling noticed");
 		spin_lock_irqsave(&acm->read_lock, flags);
 		list_add(&buf->list, &acm->filled_read_bufs);
 		spin_unlock_irqrestore(&acm->read_lock, flags);
 		return;
 	}
-	spin_unlock(&acm->throttle_lock);
 
 	spin_lock_irqsave(&acm->read_lock, flags);
 	list_add(&buf->list, &acm->spare_read_bufs);
@@ -467,7 +471,8 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 		goto bail_out;
 	}
 
-	if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS))
+	if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS) &&
+	    (acm->ctrl_caps & USB_CDC_CAP_LINE))
 		goto full_bailout;
 
 	INIT_LIST_HEAD(&acm->spare_read_urbs);
@@ -480,6 +485,8 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 		list_add(&(acm->rb[i].list), &acm->spare_read_bufs);
 	}
 
+	acm->throttle = 0;
+
 	tasklet_schedule(&acm->urb_task);
 
 done:
@@ -1092,6 +1099,10 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
 	.driver_info = SINGLE_RX_URB, /* firmware bug */
 	},
+	{ USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_V25TER) },

drivers/usb/core/devices.c

@@ -604,10 +604,6 @@ static unsigned int usb_device_poll(struct file *file, struct poll_table_struct
 	lock_kernel();
 	if (!st) {
 		st = kmalloc(sizeof(struct usb_device_status), GFP_KERNEL);
-		if (!st) {
-			unlock_kernel();
-			return POLLIN;
-		}
 
 		/* we may have dropped BKL - need to check for having lost the race */
 		if (file->private_data) {
@@ -615,6 +611,11 @@ static unsigned int usb_device_poll(struct file *file, struct poll_table_struct
 			st = file->private_data;
 			goto lost_race;
 		}
+		/* we haven't lost - check for allocation failure now */
+		if (!st) {
+			unlock_kernel();
+			return POLLIN;
+		}
 
 		/*
 		 * need to prevent the module from being unloaded, since

drivers/usb/core/devio.c

@@ -857,11 +857,11 @@ static int proc_setintf(struct dev_state *ps, void __user *arg)
 
 static int proc_setconfig(struct dev_state *ps, void __user *arg)
 {
-	unsigned int u;
+	int u;
 	int status = 0;
  	struct usb_host_config *actconfig;
 
-	if (get_user(u, (unsigned int __user *)arg))
+	if (get_user(u, (int __user *)arg))
 		return -EFAULT;
 
  	actconfig = ps->dev->actconfig;

drivers/usb/core/driver.c

@@ -743,6 +743,7 @@ EXPORT_SYMBOL_GPL(usb_deregister_device_driver);
  * usb_register_driver - register a USB interface driver
  * @new_driver: USB operations for the interface driver
  * @owner: module owner of this driver.
+ * @mod_name: module name string
  *
  * Registers a USB interface driver with the USB core.  The list of
  * unattached interfaces will be rescanned whenever a new driver is

drivers/usb/core/endpoint.c

@@ -229,7 +229,7 @@ static int init_endpoint_class(void)
 	kref_init(&ep_class->kref);
 	ep_class->class = class_create(THIS_MODULE, "usb_endpoint");
 	if (IS_ERR(ep_class->class)) {
-		result = IS_ERR(ep_class->class);
+		result = PTR_ERR(ep_class->class);
 		goto class_create_error;
 	}
 

drivers/usb/core/generic.c

@@ -184,7 +184,7 @@ static void generic_disconnect(struct usb_device *udev)
 	/* if this is only an unbind, not a physical disconnect, then
 	 * unconfigure the device */
 	if (udev->actconfig)
-		usb_set_configuration(udev, 0);
+		usb_set_configuration(udev, -1);
 
 	usb_remove_sysfs_dev_files(udev);
 }

drivers/usb/core/hub.c

@@ -44,6 +44,7 @@ struct usb_hub {
 		struct usb_hub_status	hub;
 		struct usb_port_status	port;
 	}			*status;	/* buffer for status reports */
+	struct mutex		status_mutex;	/* for the status buffer */
 
 	int			error;		/* last reported error */
 	int			nerrors;	/* track consecutive errors */
@@ -535,6 +536,7 @@ static int hub_hub_status(struct usb_hub *hub,
 {
 	int ret;
 
+	mutex_lock(&hub->status_mutex);
 	ret = get_hub_status(hub->hdev, &hub->status->hub);
 	if (ret < 0)
 		dev_err (hub->intfdev,
@@ -544,6 +546,7 @@ static int hub_hub_status(struct usb_hub *hub,
 		*change = le16_to_cpu(hub->status->hub.wHubChange); 
 		ret = 0;
 	}
+	mutex_unlock(&hub->status_mutex);
 	return ret;
 }
 
@@ -617,6 +620,7 @@ static int hub_configure(struct usb_hub *hub,
 		ret = -ENOMEM;
 		goto fail;
 	}
+	mutex_init(&hub->status_mutex);
 
 	hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);
 	if (!hub->descriptor) {
@@ -1396,6 +1400,7 @@ static int hub_port_status(struct usb_hub *hub, int port1,
 {
 	int ret;
 
+	mutex_lock(&hub->status_mutex);
 	ret = get_port_status(hub->hdev, port1, &hub->status->port);
 	if (ret < 4) {
 		dev_err (hub->intfdev,
@@ -1407,6 +1412,7 @@ static int hub_port_status(struct usb_hub *hub, int port1,
 		*change = le16_to_cpu(hub->status->port.wPortChange); 
 		ret = 0;
 	}
+	mutex_unlock(&hub->status_mutex);
 	return ret;
 }
 
@@ -1904,6 +1910,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 	struct usb_hub		*hub = usb_get_intfdata (intf);
 	struct usb_device	*hdev = hub->hdev;
 	unsigned		port1;
+	int			status = 0;
 
 	/* fail if children aren't already suspended */
 	for (port1 = 1; port1 <= hdev->maxchild; port1++) {
@@ -1927,24 +1934,18 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 
 	dev_dbg(&intf->dev, "%s\n", __FUNCTION__);
 
+	/* stop khubd and related activity */
+	hub_quiesce(hub);
+
 	/* "global suspend" of the downstream HC-to-USB interface */
 	if (!hdev->parent) {
-		struct usb_bus	*bus = hdev->bus;
-		if (bus) {
-			int	status = hcd_bus_suspend (bus);
-
-			if (status != 0) {
-				dev_dbg(&hdev->dev, "'global' suspend %d\n",
-					status);
-				return status;
-			}
-		} else
-			return -EOPNOTSUPP;
+		status = hcd_bus_suspend(hdev->bus);
+		if (status != 0) {
+			dev_dbg(&hdev->dev, "'global' suspend %d\n", status);
+			hub_activate(hub);
+		}
 	}
-
-	/* stop khubd and related activity */
-	hub_quiesce(hub);
-	return 0;
+	return status;
 }
 
 static int hub_resume(struct usb_interface *intf)

drivers/usb/core/message.c

@@ -1316,6 +1316,14 @@ static void release_interface(struct device *dev)
  * use this kind of configurability; many devices only have one
  * configuration.
  *
+ * @configuration is the value of the configuration to be installed.
+ * According to the USB spec (e.g. section 9.1.1.5), configuration values
+ * must be non-zero; a value of zero indicates that the device in
+ * unconfigured.  However some devices erroneously use 0 as one of their
+ * configuration values.  To help manage such devices, this routine will
+ * accept @configuration = -1 as indicating the device should be put in
+ * an unconfigured state.
+ *
  * USB device configurations may affect Linux interoperability,
  * power consumption and the functionality available.  For example,
  * the default configuration is limited to using 100mA of bus power,
@@ -1347,10 +1355,15 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 	struct usb_interface **new_interfaces = NULL;
 	int n, nintf;
 
-	for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
-		if (dev->config[i].desc.bConfigurationValue == configuration) {
-			cp = &dev->config[i];
-			break;
+	if (configuration == -1)
+		configuration = 0;
+	else {
+		for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
+			if (dev->config[i].desc.bConfigurationValue ==
+					configuration) {
+				cp = &dev->config[i];
+				break;
+			}
 		}
 	}
 	if ((!cp && configuration != 0))
@@ -1359,6 +1372,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 	/* The USB spec says configuration 0 means unconfigured.
 	 * But if a device includes a configuration numbered 0,
 	 * we will accept it as a correctly configured state.
+	 * Use -1 if you really want to unconfigure the device.
 	 */
 	if (cp && configuration == 0)
 		dev_warn(&dev->dev, "config 0 descriptor??\n");

drivers/usb/core/otg_whitelist.h

@@ -31,7 +31,7 @@ static struct usb_device_id whitelist_table [] = {
 { USB_DEVICE_INFO(7, 1, 3) },
 #endif
 
-#ifdef	CONFIG_USB_CDCETHER
+#ifdef	CONFIG_USB_NET_CDCETHER
 /* Linux-USB CDC Ethernet gadget */
 { USB_DEVICE(0x0525, 0xa4a1), },
 /* Linux-USB CDC Ethernet + RNDIS gadget */

drivers/usb/core/sysfs.c

@@ -63,7 +63,7 @@ set_bConfigurationValue(struct device *dev, struct device_attribute *attr,
 	struct usb_device	*udev = to_usb_device(dev);
 	int			config, value;
 
-	if (sscanf(buf, "%u", &config) != 1 || config > 255)
+	if (sscanf(buf, "%d", &config) != 1 || config < -1 || config > 255)
 		return -EINVAL;
 	usb_lock_device(udev);
 	value = usb_set_configuration(udev, config);

drivers/usb/gadget/at91_udc.c

@@ -784,7 +784,7 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value)
 	return status;
 }
 
-static struct usb_ep_ops at91_ep_ops = {
+static const struct usb_ep_ops at91_ep_ops = {
 	.enable		= at91_ep_enable,
 	.disable	= at91_ep_disable,
 	.alloc_request	= at91_ep_alloc_request,
@@ -1651,7 +1651,7 @@ static void at91udc_shutdown(struct platform_device *dev)
 	pullup(platform_get_drvdata(dev), 0);
 }
 
-static int __devinit at91udc_probe(struct platform_device *pdev)
+static int __init at91udc_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	struct at91_udc	*udc;
@@ -1762,7 +1762,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
 	return retval;
 }
 
-static int __devexit at91udc_remove(struct platform_device *pdev)
+static int __exit at91udc_remove(struct platform_device *pdev)
 {
 	struct at91_udc *udc = platform_get_drvdata(pdev);
 	struct resource *res;
@@ -1836,8 +1836,7 @@ static int at91udc_resume(struct platform_device *pdev)
 #endif
 
 static struct platform_driver at91_udc = {
-	.probe		= at91udc_probe,
-	.remove		= __devexit_p(at91udc_remove),
+	.remove		= __exit_p(at91udc_remove),
 	.shutdown	= at91udc_shutdown,
 	.suspend	= at91udc_suspend,
 	.resume		= at91udc_resume,
@@ -1847,13 +1846,13 @@ static struct platform_driver at91_udc = {
 	},
 };
 
-static int __devinit udc_init_module(void)
+static int __init udc_init_module(void)
 {
-	return platform_driver_register(&at91_udc);
+	return platform_driver_probe(&at91_udc, at91udc_probe);
 }
 module_init(udc_init_module);
 
-static void __devexit udc_exit_module(void)
+static void __exit udc_exit_module(void)
 {
 	platform_driver_unregister(&at91_udc);
 }

drivers/usb/gadget/serial.c

@@ -1699,6 +1699,7 @@ static int gs_setup_class(struct usb_gadget *gadget,
 			memcpy(&port->port_line_coding, req->buf, ret);
 			spin_unlock(&port->port_lock);
 		}
+		ret = 0;
 		break;
 
 	case USB_CDC_REQ_GET_LINE_CODING:

drivers/usb/host/ehci-hcd.c

@@ -42,6 +42,9 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
+#ifdef CONFIG_PPC_PS3
+#include <asm/firmware.h>
+#endif
 
 
 /*-------------------------------------------------------------------------*/
@@ -299,6 +302,19 @@ static void ehci_watchdog (unsigned long param)
 	spin_unlock_irqrestore (&ehci->lock, flags);
 }
 
+/* On some systems, leaving remote wakeup enabled prevents system shutdown.
+ * The firmware seems to think that powering off is a wakeup event!
+ * This routine turns off remote wakeup and everything else, on all ports.
+ */
+static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
+{
+	int	port = HCS_N_PORTS(ehci->hcs_params);
+
+	while (port--)
+		ehci_writel(ehci, PORT_RWC_BITS,
+				&ehci->regs->port_status[port]);
+}
+
 /* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
  * This forcibly disables dma and IRQs, helping kexec and other cases
  * where the next system software may expect clean state.
@@ -310,9 +326,13 @@ ehci_shutdown (struct usb_hcd *hcd)
 
 	ehci = hcd_to_ehci (hcd);
 	(void) ehci_halt (ehci);
+	ehci_turn_off_all_ports(ehci);
 
 	/* make BIOS/etc use companion controller during reboot */
 	ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+
+	/* unblock posted writes */
+	ehci_readl(ehci, &ehci->regs->configured_flag);
 }
 
 static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
@@ -951,15 +971,18 @@ static int __init ehci_hcd_init(void)
 #endif
 
 #ifdef PS3_SYSTEM_BUS_DRIVER
-	retval = ps3_system_bus_driver_register(&PS3_SYSTEM_BUS_DRIVER);
-	if (retval < 0) {
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
+		retval = ps3_system_bus_driver_register(
+				&PS3_SYSTEM_BUS_DRIVER);
+		if (retval < 0) {
 #ifdef PLATFORM_DRIVER
-		platform_driver_unregister(&PLATFORM_DRIVER);
+			platform_driver_unregister(&PLATFORM_DRIVER);
 #endif
 #ifdef PCI_DRIVER
-		pci_unregister_driver(&PCI_DRIVER);
+			pci_unregister_driver(&PCI_DRIVER);
 #endif
-		return retval;
+			return retval;
+		}
 	}
 #endif
 
@@ -976,7 +999,8 @@ static void __exit ehci_hcd_cleanup(void)
 	pci_unregister_driver(&PCI_DRIVER);
 #endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
-	ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1))
+		ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
 #endif
 }
 module_exit(ehci_hcd_cleanup);

drivers/usb/host/ehci-hub.c

@@ -36,6 +36,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	int			port;
 	int			mask;
 
+	ehci_dbg(ehci, "suspend root hub\n");
+
 	if (time_before (jiffies, ehci->next_statechange))
 		msleep(5);
 

drivers/usb/host/isp116x-hcd.c

@@ -1577,7 +1577,7 @@ static int isp116x_remove(struct platform_device *pdev)
 
 #define resource_len(r) (((r)->end - (r)->start) + 1)
 
-static int __init isp116x_probe(struct platform_device *pdev)
+static int __devinit isp116x_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
 	struct isp116x *isp116x;

drivers/usb/host/ohci-at91.c

@@ -18,19 +18,38 @@
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
 
 #ifndef CONFIG_ARCH_AT91
 #error "CONFIG_ARCH_AT91 must be defined."
 #endif
 
-/* interface and function clocks */
-static struct clk *iclk, *fclk;
+/* interface and function clocks; sometimes also an AHB clock */
+static struct clk *iclk, *fclk, *hclk;
 static int clocked;
 
 extern int usb_disabled(void);
 
 /*-------------------------------------------------------------------------*/
 
+static void at91_start_clock(void)
+{
+	if (cpu_is_at91sam9261())
+		clk_enable(hclk);
+	clk_enable(iclk);
+	clk_enable(fclk);
+	clocked = 1;
+}
+
+static void at91_stop_clock(void)
+{
+	clk_disable(fclk);
+	clk_disable(iclk);
+	if (cpu_is_at91sam9261())
+		clk_disable(hclk);
+	clocked = 0;
+}
+
 static void at91_start_hc(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
@@ -41,9 +60,7 @@ static void at91_start_hc(struct platform_device *pdev)
 	/*
 	 * Start the USB clocks.
 	 */
-	clk_enable(iclk);
-	clk_enable(fclk);
-	clocked = 1;
+	at91_start_clock();
 
 	/*
 	 * The USB host controller must remain in reset.
@@ -66,9 +83,7 @@ static void at91_stop_hc(struct platform_device *pdev)
 	/*
 	 * Stop the USB clocks.
 	 */
-	clk_disable(fclk);
-	clk_disable(iclk);
-	clocked = 0;
+	at91_stop_clock();
 }
 
 
@@ -126,6 +141,8 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 
 	iclk = clk_get(&pdev->dev, "ohci_clk");
 	fclk = clk_get(&pdev->dev, "uhpck");
+	if (cpu_is_at91sam9261())
+		hclk = clk_get(&pdev->dev, "hck0");
 
 	at91_start_hc(pdev);
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -137,6 +154,8 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 	/* Error handling */
 	at91_stop_hc(pdev);
 
+	if (cpu_is_at91sam9261())
+		clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
 
@@ -171,9 +190,11 @@ static int usb_hcd_at91_remove(struct usb_hcd *hcd,
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 
+	if (cpu_is_at91sam9261())
+		clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
-	fclk = iclk = NULL;
+	fclk = iclk = hclk = NULL;
 
 	dev_set_drvdata(&pdev->dev, NULL);
 	return 0;
@@ -280,9 +301,7 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
 	 */
 	if (at91_suspend_entering_slow_clock()) {
 		ohci_usb_reset (ohci);
-		clk_disable(fclk);
-		clk_disable(iclk);
-		clocked = 0;
+		at91_stop_clock();
 	}
 
 	return 0;
@@ -295,11 +314,8 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
 	if (device_may_wakeup(&pdev->dev))
 		disable_irq_wake(hcd->irq);
 
-	if (!clocked) {
-		clk_enable(iclk);
-		clk_enable(fclk);
-		clocked = 1;
-	}
+	if (!clocked)
+		at91_start_clock();
 
 	return 0;
 }

drivers/usb/host/ohci-hcd.c

@@ -42,6 +42,9 @@
 #include <asm/system.h>
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
+#ifdef CONFIG_PPC_PS3
+#include <asm/firmware.h>
+#endif
 
 #include "../core/hcd.h"
 
@@ -944,9 +947,12 @@ static int __init ohci_hcd_mod_init(void)
 		sizeof (struct ed), sizeof (struct td));
 
 #ifdef PS3_SYSTEM_BUS_DRIVER
-	retval = ps3_system_bus_driver_register(&PS3_SYSTEM_BUS_DRIVER);
-	if (retval < 0)
-		goto error_ps3;
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
+		retval = ps3_system_bus_driver_register(
+				&PS3_SYSTEM_BUS_DRIVER);
+		if (retval < 0)
+			goto error_ps3;
+	}
 #endif
 
 #ifdef PLATFORM_DRIVER
@@ -992,7 +998,8 @@ static int __init ohci_hcd_mod_init(void)
  error_platform:
 #endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
-	ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1))
+		ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
  error_ps3:
 #endif
 	return retval;
@@ -1014,7 +1021,8 @@ static void __exit ohci_hcd_mod_exit(void)
 	platform_driver_unregister(&PLATFORM_DRIVER);
 #endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
-	ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1))
+		ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
 #endif
 }
 module_exit(ohci_hcd_mod_exit);

drivers/usb/input/hid-core.c

@@ -515,6 +515,7 @@ void usbhid_close(struct hid_device *hid)
 
 #define USB_VENDOR_ID_TURBOX		0x062a
 #define USB_DEVICE_ID_TURBOX_KEYBOARD	0x0201
+#define USB_VENDOR_ID_CIDC		0x1677
 
 /*
  * Initialize all reports
@@ -548,7 +549,6 @@ void usbhid_init_reports(struct hid_device *hid)
 }
 
 #define USB_VENDOR_ID_GTCO		0x078c
-#define USB_VENDOR_ID_GTCO_IPANEL_2     0x5543
 #define USB_DEVICE_ID_GTCO_90		0x0090
 #define USB_DEVICE_ID_GTCO_100		0x0100
 #define USB_DEVICE_ID_GTCO_101		0x0101
@@ -594,8 +594,6 @@ void usbhid_init_reports(struct hid_device *hid)
 #define USB_DEVICE_ID_GTCO_1004		0x1004
 #define USB_DEVICE_ID_GTCO_1005		0x1005
 #define USB_DEVICE_ID_GTCO_1006		0x1006
-#define USB_DEVICE_ID_GTCO_8		0x0008
-#define USB_DEVICE_ID_GTCO_d            0x000d
 
 #define USB_VENDOR_ID_WACOM		0x056a
 
@@ -854,8 +852,6 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_8, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_d, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
@@ -953,6 +949,8 @@ static const struct hid_blacklist {
 
 	{ USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER, HID_QUIRK_SONY_PS3_CONTROLLER },
 
+	{ USB_VENDOR_ID_CIDC, 0x0103, HID_QUIRK_IGNORE },
+
 	{ 0, 0 }
 };
 

drivers/usb/misc/Kconfig

@@ -88,6 +88,17 @@ config USB_LCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called usblcd.
 
+config USB_BERRY_CHARGE
+	tristate "USB BlackBerry recharge support"
+	depends on USB
+	help
+	  Say Y here if you want to connect a BlackBerry device to your
+	  computer's USB port and have it automatically switch to "recharge"
+	  mode.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called berry_charge.
+
 config USB_LED
 	tristate "USB LED driver support"
 	depends on USB

drivers/usb/misc/Makefile

@@ -6,6 +6,7 @@
 obj-$(CONFIG_USB_ADUTUX)	+= adutux.o
 obj-$(CONFIG_USB_APPLEDISPLAY)	+= appledisplay.o
 obj-$(CONFIG_USB_AUERSWALD)	+= auerswald.o
+obj-$(CONFIG_USB_BERRY_CHARGE)	+= berry_charge.o
 obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
 obj-$(CONFIG_USB_CYTHERM)	+= cytherm.o
 obj-$(CONFIG_USB_EMI26)		+= emi26.o

drivers/usb/misc/berry_charge.c

+/*
+ * USB BlackBerry charging module
+ *
+ * Copyright (C) 2007 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ * Information on how to switch configs was taken by the bcharge.cc file
+ * created by the barry.sf.net project.
+ *
+ * bcharge.cc has the following copyright:
+ * 	Copyright (C) 2006, Net Direct Inc. (http://www.netdirect.ca/)
+ * and is released under the GPLv2.
+ *
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#define RIM_VENDOR		0x0fca
+#define BLACKBERRY		0x0001
+
+static int debug;
+
+#ifdef dbg
+#undef dbg
+#endif
+#define dbg(dev, format, arg...)				\
+	if (debug)						\
+		dev_printk(KERN_DEBUG , dev , format , ## arg)
+
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(RIM_VENDOR, BLACKBERRY) },
+	{ },					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int magic_charge(struct usb_device *udev)
+{
+	char *dummy_buffer = kzalloc(2, GFP_KERNEL);
+	int retval;
+
+	if (!dummy_buffer)
+		return -ENOMEM;
+
+	/* send two magic commands and then set the configuration.  The device
+	 * will then reset itself with the new power usage and should start
+	 * charging. */
+
+	/* Note, with testing, it only seems that the first message is really
+	 * needed (at least for the 8700c), but to be safe, we emulate what
+	 * other operating systems seem to be sending to their device.  We
+	 * really need to get some specs for this device to be sure about what
+	 * is going on here.
+	 */
+	dbg(&udev->dev, "Sending first magic command\n");
+	retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+				 0xa5, 0xc0, 0, 1, dummy_buffer, 2, 100);
+	if (retval != 2) {
+		dev_err(&udev->dev, "First magic command failed: %d.\n",
+			retval);
+		return retval;
+	}
+
+	dbg(&udev->dev, "Sending first magic command\n");
+	retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+				 0xa2, 0x40, 0, 1, dummy_buffer, 0, 100);
+	if (retval != 0) {
+		dev_err(&udev->dev, "Second magic command failed: %d.\n",
+			retval);
+		return retval;
+	}
+
+	dbg(&udev->dev, "Calling set_configuration\n");
+	retval = usb_driver_set_configuration(udev, 1);
+	if (retval)
+		dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
+
+	return retval;
+}
+
+static int berry_probe(struct usb_interface *intf,
+		       const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+
+	dbg(&udev->dev, "Power is set to %dmA\n",
+	    udev->actconfig->desc.bMaxPower * 2);
+
+	/* check the power usage so we don't try to enable something that is
+	 * already enabled */
+	if ((udev->actconfig->desc.bMaxPower * 2) == 500) {
+		dbg(&udev->dev, "device is already charging, power is "
+		    "set to %dmA\n", udev->actconfig->desc.bMaxPower * 2);
+		return -ENODEV;
+	}
+
+	/* turn the power on */
+	magic_charge(udev);
+
+	/* we don't really want to bind to the device, userspace programs can
+	 * handle the syncing just fine, so get outta here. */
+	return -ENODEV;
+}
+
+static void berry_disconnect(struct usb_interface *intf)
+{
+}
+
+static struct usb_driver berry_driver = {
+	.name =		"berry_charge",
+	.probe =	berry_probe,
+	.disconnect =	berry_disconnect,
+	.id_table =	id_table,
+};
+
+static int __init berry_init(void)
+{
+	return usb_register(&berry_driver);
+}
+
+static void __exit berry_exit(void)
+{
+	usb_deregister(&berry_driver);
+}
+
+module_init(berry_init);
+module_exit(berry_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>");
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");

drivers/usb/net/Kconfig

@@ -84,6 +84,7 @@ config USB_PEGASUS
 config USB_RTL8150
 	tristate "USB RTL8150 based ethernet device support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
+	select MII
 	help
 	  Say Y here if you have RTL8150 based usb-ethernet adapter.
 	  Send me <petkan@users.sourceforge.net> any comments you may have.
@@ -98,7 +99,7 @@ config USB_USBNET_MII
 
 config USB_USBNET
 	tristate "Multi-purpose USB Networking Framework"
-	select MII if USBNET_MII != n
+	select MII if USB_USBNET_MII != n
 	---help---
 	  This driver supports several kinds of network links over USB,
 	  with "minidrivers" built around a common network driver core
@@ -239,6 +240,7 @@ config USB_NET_RNDIS_HOST
 config USB_NET_CDC_SUBSET
 	tristate "Simple USB Network Links (CDC Ethernet subset)"
 	depends on USB_USBNET
+	default y
 	help
 	  This driver module supports USB network devices that can work
 	  without any device-specific information.  Select it if you have
@@ -298,6 +300,13 @@ config USB_EPSON2888
 	  Choose this option to support the usb networking links used
 	  by some sample firmware from Epson.
 
+config USB_KC2190
+	boolean "KT Technology KC2190 based cables (InstaNet)"
+	depends on USB_NET_CDC_SUBSET && EXPERIMENTAL
+	help
+	  Choose this option if you're using a host-to-host cable
+	  with one of these chips.
+
 config USB_NET_ZAURUS
 	tristate "Sharp Zaurus (stock ROMs) and compatible"
 	depends on USB_USBNET

drivers/usb/net/asix.c

@@ -351,9 +351,11 @@ static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 
 	skb_push(skb, 4);
 	packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
+	cpu_to_le32s(&packet_len);
 	memcpy(skb->data, &packet_len, sizeof(packet_len));
 
 	if ((skb->len % 512) == 0) {
+		cpu_to_le32s(&padbytes);
 		memcpy( skb->tail, &padbytes, sizeof(padbytes));
 		skb_put(skb, sizeof(padbytes));
 	}

drivers/usb/net/cdc_subset.c

@@ -79,13 +79,19 @@ static int always_connected (struct usbnet *dev)
  *
  * ALi M5632 driver ... does high speed
  *
+ * NOTE that the MS-Windows drivers for this chip use some funky and
+ * (naturally) undocumented 7-byte prefix to each packet, so this is a
+ * case where we don't currently interoperate.  Also, once you unplug
+ * one end of the cable, you need to replug the other end too ... since
+ * chip docs are unavailable, there's no way to reset the relevant state
+ * short of a power cycle.
+ *
  *-------------------------------------------------------------------------*/
 
 static const struct driver_info	ali_m5632_info = {
 	.description =	"ALi M5632",
 };
 
-
 #endif
 
 
@@ -159,6 +165,11 @@ static const struct driver_info	epson2888_info = {
 #endif	/* CONFIG_USB_EPSON2888 */
 
 
+/*-------------------------------------------------------------------------
+ *
+ * info from Jonathan McDowell <noodles@earth.li>
+ *
+ *-------------------------------------------------------------------------*/
 #ifdef CONFIG_USB_KC2190
 #define HAVE_HARDWARE
 static const struct driver_info kc2190_info = {
@@ -223,6 +234,10 @@ static const struct usb_device_id	products [] = {
 	USB_DEVICE (0x0402, 0x5632),	// ALi defaults
 	.driver_info =	(unsigned long) &ali_m5632_info,
 },
+{
+	USB_DEVICE (0x182d,0x207c),	// SiteCom CN-124
+	.driver_info =	(unsigned long) &ali_m5632_info,
+},
 #endif
 
 #ifdef	CONFIG_USB_AN2720
@@ -314,13 +329,13 @@ static struct usb_driver cdc_subset_driver = {
 
 static int __init cdc_subset_init(void)
 {
- 	return usb_register(&cdc_subset_driver);
+	return usb_register(&cdc_subset_driver);
 }
 module_init(cdc_subset_init);
 
 static void __exit cdc_subset_exit(void)
 {
- 	usb_deregister(&cdc_subset_driver);
+	usb_deregister(&cdc_subset_driver);
 }
 module_exit(cdc_subset_exit);
 

drivers/usb/net/usbnet.c

@@ -147,7 +147,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
 		if (tmp < 0)
 			return tmp;
 	}
-	
+
 	dev->in = usb_rcvbulkpipe (dev->udev,
 			in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 	dev->out = usb_sndbulkpipe (dev->udev,
@@ -327,7 +327,7 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
 	if (netif_running (dev->net)
 			&& netif_device_present (dev->net)
 			&& !test_bit (EVENT_RX_HALT, &dev->flags)) {
-		switch (retval = usb_submit_urb (urb, GFP_ATOMIC)){ 
+		switch (retval = usb_submit_urb (urb, GFP_ATOMIC)){
 		case -EPIPE:
 			usbnet_defer_kevent (dev, EVENT_RX_HALT);
 			break;
@@ -443,7 +443,7 @@ static void rx_complete (struct urb *urb)
 	    case -EOVERFLOW:
 		dev->stats.rx_over_errors++;
 		// FALLTHROUGH
-	    
+
 	    default:
 		entry->state = rx_cleanup;
 		dev->stats.rx_errors++;
@@ -560,7 +560,7 @@ static int usbnet_stop (struct net_device *net)
 
 	if (netif_msg_ifdown (dev))
 		devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
-			dev->stats.rx_packets, dev->stats.tx_packets, 
+			dev->stats.rx_packets, dev->stats.tx_packets,
 			dev->stats.rx_errors, dev->stats.tx_errors
 			);
 
@@ -578,7 +578,7 @@ static int usbnet_stop (struct net_device *net)
 			devdbg (dev, "waited for %d urb completions", temp);
 	}
 	dev->wait = NULL;
-	remove_wait_queue (&unlink_wakeup, &wait); 
+	remove_wait_queue (&unlink_wakeup, &wait);
 
 	usb_kill_urb(dev->interrupt);
 
@@ -834,7 +834,7 @@ kevent (struct work_struct *work)
 	}
 
 	if (test_bit (EVENT_LINK_RESET, &dev->flags)) {
-		struct driver_info 	*info = dev->driver_info;
+		struct driver_info	*info = dev->driver_info;
 		int			retval = 0;
 
 		clear_bit (EVENT_LINK_RESET, &dev->flags);
@@ -1066,7 +1066,7 @@ static void usbnet_bh (unsigned long param)
  * USB Device Driver support
  *
  *-------------------------------------------------------------------------*/
- 
+
 // precondition: never called in_interrupt
 
 void usbnet_disconnect (struct usb_interface *intf)
@@ -1087,7 +1087,7 @@ void usbnet_disconnect (struct usb_interface *intf)
 			intf->dev.driver->name,
 			xdev->bus->bus_name, xdev->devpath,
 			dev->driver_info->description);
-	
+
 	net = dev->net;
 	unregister_netdev (net);
 
@@ -1111,7 +1111,7 @@ int
 usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 {
 	struct usbnet			*dev;
-	struct net_device 		*net;
+	struct net_device		*net;
 	struct usb_host_interface	*interface;
 	struct driver_info		*info;
 	struct usb_device		*xdev;
@@ -1181,6 +1181,9 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 	// NOTE net->name still not usable ...
 	if (info->bind) {
 		status = info->bind (dev, udev);
+		if (status < 0)
+			goto out1;
+
 		// heuristic:  "usb%d" for links we know are two-host,
 		// else "eth%d" when there's reasonable doubt.  userspace
 		// can rename the link if it knows better.
@@ -1207,12 +1210,12 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 	if (status == 0 && dev->status)
 		status = init_status (dev, udev);
 	if (status < 0)
-		goto out1;
+		goto out3;
 
 	if (!dev->rx_urb_size)
 		dev->rx_urb_size = dev->hard_mtu;
 	dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
-	
+
 	SET_NETDEV_DEV(net, &udev->dev);
 	status = register_netdev (net);
 	if (status)
@@ -1255,7 +1258,7 @@ EXPORT_SYMBOL_GPL(usbnet_probe);
 int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
 {
 	struct usbnet		*dev = usb_get_intfdata(intf);
-	
+
 	/* accelerate emptying of the rx and queues, to avoid
 	 * having everything error out.
 	 */
@@ -1286,7 +1289,7 @@ static int __init usbnet_init(void)
 			< sizeof (struct skb_data));
 
 	random_ether_addr(node_id);
- 	return 0;
+	return 0;
 }
 module_init(usbnet_init);
 

drivers/usb/serial/airprime.c

@@ -58,11 +58,6 @@ static void airprime_read_bulk_callback(struct urb *urb)
 	if (urb->status) {
 		dbg("%s - nonzero read bulk status received: %d",
 		    __FUNCTION__, urb->status);
-		/* something happened, so free up the memory for this urb */
-		if (urb->transfer_buffer) {
-			kfree (urb->transfer_buffer);
-			urb->transfer_buffer = NULL;
-		}
 		return;
 	}
 	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
@@ -146,6 +141,8 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp)
 				  airprime_read_bulk_callback, port);
 		result = usb_submit_urb(urb, GFP_KERNEL);
 		if (result) {
+			usb_free_urb(urb);
+			kfree(buffer);
 			dev_err(&port->dev,
 				"%s - failed submitting read urb %d for port %d, error %d\n",
 				__FUNCTION__, i, port->number, result);
@@ -160,27 +157,12 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp)
 	/* some error happened, cancel any submitted urbs and clean up anything that
 	   got allocated successfully */
 
-	for ( ; i >= 0; --i) {
+	while (i-- != 0) {
 		urb = priv->read_urbp[i];
-		if (urb) {
-			/* This urb was submitted successfully. So we have to
-			   cancel it.
-			   Unlinking the urb will invoke read_bulk_callback()
-			   with an error status, so its transfer buffer will
-			   be freed there */
-			if (usb_unlink_urb (urb) != -EINPROGRESS) {
-				/* comments in drivers/usb/core/urb.c say this
-				   can only happen if the urb was never submitted,
-				   or has completed already.
-				   Either way we may have to free the transfer
-				   buffer here. */
-				if (urb->transfer_buffer) {
-					kfree (urb->transfer_buffer);
-					urb->transfer_buffer = NULL;
-				}
-			}
-			usb_free_urb (urb);
-		}
+		buffer = urb->transfer_buffer;
+		usb_kill_urb (urb);
+		usb_free_urb (urb);
+		kfree (buffer);
 	}
 
  out:
@@ -194,10 +176,9 @@ static void airprime_close(struct usb_serial_port *port, struct file * filp)
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	/* killing the urb will invoke read_bulk_callback() with an error status,
-	   so the transfer buffer will be freed there */
 	for (i = 0; i < NUM_READ_URBS; ++i) {
 		usb_kill_urb (priv->read_urbp[i]);
+		kfree (priv->read_urbp[i]->transfer_buffer);
 		usb_free_urb (priv->read_urbp[i]);
 	}
 

drivers/usb/serial/cp2101.c

@@ -69,6 +69,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
 	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 	{ } /* Terminating Entry */

drivers/usb/serial/generic.c

@@ -66,6 +66,8 @@ struct usb_serial_driver usb_serial_generic_device = {
 	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		1,
 	.shutdown =		usb_serial_generic_shutdown,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 };
 
 static int generic_probe(struct usb_interface *interface,
@@ -115,6 +117,7 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;
+	unsigned long flags;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
@@ -124,7 +127,13 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
 	if (port->tty)
 		port->tty->low_latency = 1;
 
-	/* if we have a bulk interrupt, start reading from it */
+	/* clear the throttle flags */
+	spin_lock_irqsave(&port->lock, flags);
+	port->throttled = 0;
+	port->throttle_req = 0;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* if we have a bulk endpoint, start reading from it */
 	if (serial->num_bulk_in) {
 		/* Start reading from the device */
 		usb_fill_bulk_urb (port->read_urb, serial->dev,
@@ -253,31 +262,22 @@ int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port)
 	return (chars);
 }
 
-void usb_serial_generic_read_bulk_callback (struct urb *urb)
+/* Push data to tty layer and resubmit the bulk read URB */
+static void flush_and_resubmit_read_urb (struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
 	struct usb_serial *serial = port->serial;
-	struct tty_struct *tty;
-	unsigned char *data = urb->transfer_buffer;
+	struct urb *urb = port->read_urb;
+	struct tty_struct *tty = port->tty;
 	int result;
 
-	dbg("%s - port %d", __FUNCTION__, port->number);
-
-	if (urb->status) {
-		dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
-
-	tty = port->tty;
+	/* Push data to tty */
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
-		tty_insert_flip_string(tty, data, urb->actual_length);
-	  	tty_flip_buffer_push(tty);
+		tty_insert_flip_string(tty, urb->transfer_buffer, urb->actual_length);
+	  	tty_flip_buffer_push(tty); /* is this allowed from an URB callback ? */
 	}
 
-	/* Continue trying to always read  */
+	/* Continue reading from device */
 	usb_fill_bulk_urb (port->read_urb, serial->dev,
 			   usb_rcvbulkpipe (serial->dev,
 				   	    port->bulk_in_endpointAddress),
@@ -290,6 +290,40 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb)
 	if (result)
 		dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
 }
+
+void usb_serial_generic_read_bulk_callback (struct urb *urb)
+{
+	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	int is_throttled;
+	unsigned long flags;
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
+
+	if (urb->status) {
+		dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
+		return;
+	}
+
+	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+
+	/* Throttle the device if requested by tty */
+	if (urb->actual_length) {
+		spin_lock_irqsave(&port->lock, flags);
+		is_throttled = port->throttled = port->throttle_req;
+		spin_unlock_irqrestore(&port->lock, flags);
+		if (is_throttled) {
+			/* Let the received data linger in the read URB;
+			 * usb_serial_generic_unthrottle() will pick it
+			 * up later. */
+			dbg("%s - throttling device", __FUNCTION__);
+			return;
+		}
+	}
+
+	/* Handle data and continue reading from device */
+	flush_and_resubmit_read_urb(port);
+}
 EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
 
 void usb_serial_generic_write_bulk_callback (struct urb *urb)
@@ -308,6 +342,38 @@ void usb_serial_generic_write_bulk_callback (struct urb *urb)
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
 
+void usb_serial_generic_throttle (struct usb_serial_port *port)
+{
+	unsigned long flags;
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
+
+	/* Set the throttle request flag. It will be picked up
+	 * by usb_serial_generic_read_bulk_callback(). */
+	spin_lock_irqsave(&port->lock, flags);
+	port->throttle_req = 1;
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+void usb_serial_generic_unthrottle (struct usb_serial_port *port)
+{
+	int was_throttled;
+	unsigned long flags;
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
+
+	/* Clear the throttle flags */
+	spin_lock_irqsave(&port->lock, flags);
+	was_throttled = port->throttled;
+	port->throttled = port->throttle_req = 0;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (was_throttled) {
+		/* Handle pending data and resume reading from device */
+		flush_and_resubmit_read_urb(port);
+	}
+}
+
 void usb_serial_generic_shutdown (struct usb_serial *serial)
 {
 	int i;

drivers/usb/serial/option.c

@@ -69,7 +69,6 @@ static int  option_send_setup(struct usb_serial_port *port);
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID                0x0AF0
 #define HUAWEI_VENDOR_ID                0x12D1
-#define AUDIOVOX_VENDOR_ID              0x0F3D
 #define NOVATELWIRELESS_VENDOR_ID       0x1410
 #define ANYDATA_VENDOR_ID               0x16d5
 
@@ -81,7 +80,6 @@ static int  option_send_setup(struct usb_serial_port *port);
 #define OPTION_PRODUCT_GTMAX36          0x6701
 #define HUAWEI_PRODUCT_E600             0x1001
 #define HUAWEI_PRODUCT_E220             0x1003
-#define AUDIOVOX_PRODUCT_AIRCARD        0x0112
 #define NOVATELWIRELESS_PRODUCT_U740    0x1400
 #define ANYDATA_PRODUCT_ID              0x6501
 
@@ -94,7 +92,6 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
-	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
 	{ } /* Terminating entry */
@@ -109,7 +106,6 @@ static struct usb_device_id option_ids1[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
-	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
 	{ } /* Terminating entry */

drivers/usb/serial/pl2303.c

@@ -83,6 +83,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
 	{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ID) },
+	{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 

drivers/usb/serial/pl2303.h

@@ -97,3 +97,8 @@
 /* Huawei E620 UMTS/HSDPA card (ID: 12d1:1001) */
 #define HUAWEI_VENDOR_ID	0x12d1
 #define HUAWEI_PRODUCT_ID	0x1001
+
+/* Willcom WS002IN Data Driver (by NetIndex Inc.) */
+#define WS002IN_VENDOR_ID	0x11f6
+#define WS002IN_PRODUCT_ID	0x2001
+

drivers/usb/storage/scsiglue.c

@@ -153,6 +153,12 @@ static int slave_configure(struct scsi_device *sdev)
 		if (us->flags & US_FL_FIX_CAPACITY)
 			sdev->fix_capacity = 1;
 
+		/* A few disks have two indistinguishable version, one of
+		 * which reports the correct capacity and the other does not.
+		 * The sd driver has to guess which is the case. */
+		if (us->flags & US_FL_CAPACITY_HEURISTICS)
+			sdev->guess_capacity = 1;
+
 		/* Some devices report a SCSI revision level above 2 but are
 		 * unable to handle the REPORT LUNS command (for which
 		 * support is mandatory at level 3).  Since we already have

drivers/usb/storage/unusual_devs.h

@@ -1101,6 +1101,15 @@ UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN),
 
+/* Submitted by Dylan Taft <d13f00l@gmail.com>
+ * US_FL_IGNORE_RESIDUE Needed
+ */
+UNUSUAL_DEV(  0x08ca, 0x3103, 0x0100, 0x0100,
+                "AIPTEK",
+                "Aiptek USB Keychain MP3 Player",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE),
+
 /* Entry needed for flags. Moreover, all devices with this ID use
  * bulk-only transport, but _some_ falsely report Control/Bulk instead.
  * One example is "Trumpion Digital Research MYMP3".
@@ -1311,12 +1320,13 @@ UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT ),
 
-/* Reported by Jan Mate <mate@fiit.stuba.sk> */
+/* Reported by Jan Mate <mate@fiit.stuba.sk>
+ * and by Soeren Sonnenburg <kernel@nn7.de> */
 UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
 		"Sony Ericsson",
 		"P990i",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_FIX_CAPACITY ),
+		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
 UNUSUAL_DEV(  0x0fce, 0xe031, 0x0000, 0x0000,
@@ -1385,6 +1395,16 @@ UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Thomas Baechler <thomas@archlinux.org>
+ * Fixes I/O errors with Teac HD-35PU devices
+ */
+
+UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
+               "Super Top",
+               "USB 2.0  IDE DEVICE",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+               US_FL_IGNORE_RESIDUE),
+
 /* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
  * and Renato Perini <rperini@email.it>
  */
@@ -1423,7 +1443,7 @@ UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
 		"DataStor",
 		"USB4500 FW1.04",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_FIX_CAPACITY),
+		US_FL_CAPACITY_HEURISTICS),
 
 /* Control/Bulk transport for all SubClass values */
 USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),

drivers/usb/usb-skeleton.c

@@ -90,13 +90,15 @@ static int skel_open(struct inode *inode, struct file *file)
 		goto exit;
 	}
 
+	/* increment our usage count for the device */
+	kref_get(&dev->kref);
+
 	/* prevent the device from being autosuspended */
 	retval = usb_autopm_get_interface(interface);
-	if (retval)
+	if (retval) {
+		kref_put(&dev->kref, skel_delete);
 		goto exit;
-
-	/* increment our usage count for the device */
-	kref_get(&dev->kref);
+	}
 
 	/* save our object in the file's private structure */
 	file->private_data = dev;

include/linux/usb.h

@@ -935,7 +935,7 @@ struct usb_iso_packet_descriptor {
 	unsigned int offset;
 	unsigned int length;		/* expected length */
 	unsigned int actual_length;
-	unsigned int status;
+	int status;
 };
 
 struct urb;

include/linux/usb/cdc.h

@@ -73,6 +73,13 @@ struct usb_cdc_acm_descriptor {
 	__u8	bmCapabilities;
 } __attribute__ ((packed));
 
+/* capabilities from 5.2.3.3 */
+
+#define USB_CDC_COMM_FEATURE	0x01
+#define USB_CDC_CAP_LINE	0x02
+#define USB_CDC_CAP_BRK	0x04
+#define USB_CDC_CAP_NOTIFY	0x08
+
 /* "Union Functional Descriptor" from CDC spec 5.2.3.8 */
 struct usb_cdc_union_desc {
 	__u8	bLength;

include/linux/usb/ch9.h

@@ -367,7 +367,7 @@ struct usb_debug_descriptor {
 	/* bulk endpoints with 8 byte maxpacket */
 	__u8  bDebugInEndpoint;
 	__u8  bDebugOutEndpoint;
-};
+} __attribute__((packed));
 
 /*-------------------------------------------------------------------------*/
 
@@ -396,7 +396,7 @@ struct usb_security_descriptor {
 
 	__le16 wTotalLength;
 	__u8  bNumEncryptionTypes;
-};
+} __attribute__((packed));
 
 /*-------------------------------------------------------------------------*/
 
@@ -410,7 +410,7 @@ struct usb_key_descriptor {
 	__u8  tTKID[3];
 	__u8  bReserved;
 	__u8  bKeyData[0];
-};
+} __attribute__((packed));
 
 /*-------------------------------------------------------------------------*/
 
@@ -426,7 +426,7 @@ struct usb_encryption_descriptor {
 #define	USB_ENC_TYPE_RSA_1		3	/* rsa3072/sha1 auth */
 	__u8  bEncryptionValue;		/* use in SET_ENCRYPTION */
 	__u8  bAuthKeyIndex;
-};
+} __attribute__((packed));
 
 
 /*-------------------------------------------------------------------------*/
@@ -438,7 +438,7 @@ struct usb_bos_descriptor {
 
 	__le16 wTotalLength;
 	__u8  bNumDeviceCaps;
-};
+} __attribute__((packed));
 
 /*-------------------------------------------------------------------------*/
 
@@ -447,7 +447,7 @@ struct usb_dev_cap_header {
 	__u8  bLength;
 	__u8  bDescriptorType;
 	__u8  bDevCapabilityType;
-};
+} __attribute__((packed));
 
 #define	USB_CAP_TYPE_WIRELESS_USB	1
 
@@ -475,7 +475,7 @@ struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
 	__u8  bmFFITXPowerInfo;	/* FFI power levels */
 	__le16 bmBandGroup;
 	__u8  bReserved;
-};
+} __attribute__((packed));
 
 /*-------------------------------------------------------------------------*/
 
@@ -496,7 +496,7 @@ struct usb_wireless_ep_comp_descriptor {
 #define USB_ENDPOINT_SWITCH_NO		0
 #define USB_ENDPOINT_SWITCH_SWITCH	1
 #define USB_ENDPOINT_SWITCH_SCALE	2
-};
+} __attribute__((packed));
 
 /*-------------------------------------------------------------------------*/
 
@@ -512,7 +512,7 @@ struct usb_handshake {
 	__u8 CDID[16];
 	__u8 nonce[16];
 	__u8 MIC[8];
-};
+} __attribute__((packed));
 
 /*-------------------------------------------------------------------------*/
 
@@ -524,7 +524,7 @@ struct usb_connection_context {
 	__u8 CHID[16];		/* persistent host id */
 	__u8 CDID[16];		/* device id (unique w/in host context) */
 	__u8 CK[16];		/* connection key */
-};
+} __attribute__((packed));
 
 /*-------------------------------------------------------------------------*/
 

include/linux/usb/serial.h

@@ -54,6 +54,8 @@
  * @write_wait: a wait_queue_head_t used by the port.
  * @work: work queue entry for the line discipline waking up.
  * @open_count: number of times this port has been opened.
+ * @throttled: nonzero if the read urb is inactive to throttle the device
+ * @throttle_req: nonzero if the tty wants to throttle us
  *
  * This structure is used by the usb-serial core and drivers for the specific
  * ports of a device.
@@ -88,6 +90,8 @@ struct usb_serial_port {
 	wait_queue_head_t	write_wait;
 	struct work_struct	work;
 	int			open_count;
+	char			throttled;
+	char			throttle_req;
 	struct device		dev;
 };
 #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
@@ -269,6 +273,8 @@ extern int usb_serial_generic_write_room (struct usb_serial_port *port);
 extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port);
 extern void usb_serial_generic_read_bulk_callback (struct urb *urb);
 extern void usb_serial_generic_write_bulk_callback (struct urb *urb);
+extern void usb_serial_generic_throttle (struct usb_serial_port *port);
+extern void usb_serial_generic_unthrottle (struct usb_serial_port *port);
 extern void usb_serial_generic_shutdown (struct usb_serial *serial);
 extern int usb_serial_generic_register (int debug);
 extern void usb_serial_generic_deregister (void);

include/linux/usb_usual.h

@@ -46,7 +46,9 @@
 	US_FLAG(MAX_SECTORS_64,	0x00000400)			\
 		/* Sets max_sectors to 64    */			\
 	US_FLAG(IGNORE_DEVICE,	0x00000800)			\
-		/* Don't claim device */
+		/* Don't claim device */			\
+	US_FLAG(CAPACITY_HEURISTICS,	0x00001000)		\
+		/* sometimes sizes is too big */
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };

include/linux/usbdevice_fs.h

@@ -159,9 +159,9 @@ struct usbdevfs_ioctl32 {
 #define USBDEVFS_SUBMITURB32       _IOR('U', 10, struct usbdevfs_urb32)
 #define USBDEVFS_DISCARDURB        _IO('U', 11)
 #define USBDEVFS_REAPURB           _IOW('U', 12, void *)
-#define USBDEVFS_REAPURB32         _IOW('U', 12, u32)
+#define USBDEVFS_REAPURB32         _IOW('U', 12, __u32)
 #define USBDEVFS_REAPURBNDELAY     _IOW('U', 13, void *)
-#define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, u32)
+#define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, __u32)
 #define USBDEVFS_DISCSIGNAL        _IOR('U', 14, struct usbdevfs_disconnectsignal)
 #define USBDEVFS_CLAIMINTERFACE    _IOR('U', 15, unsigned int)
 #define USBDEVFS_RELEASEINTERFACE  _IOR('U', 16, unsigned int)

include/scsi/scsi_device.h

@@ -122,6 +122,7 @@ struct scsi_device {
 	unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
 	unsigned select_no_atn:1;
 	unsigned fix_capacity:1;	/* READ_CAPACITY is too high by 1 */
+	unsigned guess_capacity:1;	/* READ_CAPACITY might be too high by 1 */
 	unsigned retry_hwerror:1;	/* Retry HARDWARE_ERROR */
 
 	unsigned int device_blocked;	/* Device returned QUEUE_FULL. */