Commit 46311707 authored by Jagan Teki's avatar Jagan Teki Committed by Shawn Guo

ARM: dts: imx: Fix "ERROR: code indent should use tabs where possible"

Fixed code indent tabs in respetcive imx23, imx51, imx53, imx6dl, imx6q
and imx6sx dtsi and dts files.
Signed-off-by: default avatarJagan Teki <jagan@openedev.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent a7859df4
...@@ -464,7 +464,7 @@ tvenc@80038000 { ...@@ -464,7 +464,7 @@ tvenc@80038000 {
reg = <0x80038000 0x2000>; reg = <0x80038000 0x2000>;
status = "disabled"; status = "disabled";
}; };
}; };
apbx@80040000 { apbx@80040000 {
compatible = "simple-bus"; compatible = "simple-bus";
......
...@@ -103,8 +103,8 @@ esdhc1: esdhc@50004000 { ...@@ -103,8 +103,8 @@ esdhc1: esdhc@50004000 {
reg = <0x50004000 0x4000>; reg = <0x50004000 0x4000>;
interrupts = <1>; interrupts = <1>;
clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>, <&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC1_PER_GATE>; <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per"; clock-names = "ipg", "ahb", "per";
bus-width = <4>; bus-width = <4>;
status = "disabled"; status = "disabled";
...@@ -115,8 +115,8 @@ esdhc2: esdhc@50008000 { ...@@ -115,8 +115,8 @@ esdhc2: esdhc@50008000 {
reg = <0x50008000 0x4000>; reg = <0x50008000 0x4000>;
interrupts = <2>; interrupts = <2>;
clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>, <&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC2_PER_GATE>; <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per"; clock-names = "ipg", "ahb", "per";
bus-width = <4>; bus-width = <4>;
status = "disabled"; status = "disabled";
...@@ -127,7 +127,7 @@ uart3: serial@5000c000 { ...@@ -127,7 +127,7 @@ uart3: serial@5000c000 {
reg = <0x5000c000 0x4000>; reg = <0x5000c000 0x4000>;
interrupts = <33>; interrupts = <33>;
clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
<&clks IMX5_CLK_UART3_PER_GATE>; <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -139,7 +139,7 @@ ecspi1: ecspi@50010000 { ...@@ -139,7 +139,7 @@ ecspi1: ecspi@50010000 {
reg = <0x50010000 0x4000>; reg = <0x50010000 0x4000>;
interrupts = <36>; interrupts = <36>;
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
<&clks IMX5_CLK_ECSPI1_PER_GATE>; <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -164,8 +164,8 @@ esdhc3: esdhc@50020000 { ...@@ -164,8 +164,8 @@ esdhc3: esdhc@50020000 {
reg = <0x50020000 0x4000>; reg = <0x50020000 0x4000>;
interrupts = <3>; interrupts = <3>;
clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>, <&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC3_PER_GATE>; <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per"; clock-names = "ipg", "ahb", "per";
bus-width = <4>; bus-width = <4>;
status = "disabled"; status = "disabled";
...@@ -176,8 +176,8 @@ esdhc4: esdhc@50024000 { ...@@ -176,8 +176,8 @@ esdhc4: esdhc@50024000 {
reg = <0x50024000 0x4000>; reg = <0x50024000 0x4000>;
interrupts = <4>; interrupts = <4>;
clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>, <&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC4_PER_GATE>; <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per"; clock-names = "ipg", "ahb", "per";
bus-width = <4>; bus-width = <4>;
status = "disabled"; status = "disabled";
...@@ -279,7 +279,7 @@ gpt: timer@53fa0000 { ...@@ -279,7 +279,7 @@ gpt: timer@53fa0000 {
reg = <0x53fa0000 0x4000>; reg = <0x53fa0000 0x4000>;
interrupts = <39>; interrupts = <39>;
clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
<&clks IMX5_CLK_GPT_HF_GATE>; <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
}; };
...@@ -298,7 +298,7 @@ pwm1: pwm@53fb4000 { ...@@ -298,7 +298,7 @@ pwm1: pwm@53fb4000 {
compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>; reg = <0x53fb4000 0x4000>;
clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
<&clks IMX5_CLK_PWM1_HF_GATE>; <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
interrupts = <61>; interrupts = <61>;
}; };
...@@ -308,7 +308,7 @@ pwm2: pwm@53fb8000 { ...@@ -308,7 +308,7 @@ pwm2: pwm@53fb8000 {
compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>; reg = <0x53fb8000 0x4000>;
clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
<&clks IMX5_CLK_PWM2_HF_GATE>; <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
interrupts = <94>; interrupts = <94>;
}; };
...@@ -318,7 +318,7 @@ uart1: serial@53fbc000 { ...@@ -318,7 +318,7 @@ uart1: serial@53fbc000 {
reg = <0x53fbc000 0x4000>; reg = <0x53fbc000 0x4000>;
interrupts = <31>; interrupts = <31>;
clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
<&clks IMX5_CLK_UART1_PER_GATE>; <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -328,7 +328,7 @@ uart2: serial@53fc0000 { ...@@ -328,7 +328,7 @@ uart2: serial@53fc0000 {
reg = <0x53fc0000 0x4000>; reg = <0x53fc0000 0x4000>;
interrupts = <32>; interrupts = <32>;
clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
<&clks IMX5_CLK_UART2_PER_GATE>; <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -383,7 +383,7 @@ uart4: serial@53ff0000 { ...@@ -383,7 +383,7 @@ uart4: serial@53ff0000 {
reg = <0x53ff0000 0x4000>; reg = <0x53ff0000 0x4000>;
interrupts = <13>; interrupts = <13>;
clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
<&clks IMX5_CLK_UART4_PER_GATE>; <&clks IMX5_CLK_UART4_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -401,7 +401,7 @@ uart5: serial@63f90000 { ...@@ -401,7 +401,7 @@ uart5: serial@63f90000 {
reg = <0x63f90000 0x4000>; reg = <0x63f90000 0x4000>;
interrupts = <86>; interrupts = <86>;
clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
<&clks IMX5_CLK_UART5_PER_GATE>; <&clks IMX5_CLK_UART5_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -420,7 +420,7 @@ ecspi2: ecspi@63fac000 { ...@@ -420,7 +420,7 @@ ecspi2: ecspi@63fac000 {
reg = <0x63fac000 0x4000>; reg = <0x63fac000 0x4000>;
interrupts = <37>; interrupts = <37>;
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
<&clks IMX5_CLK_ECSPI2_PER_GATE>; <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -430,7 +430,7 @@ sdma: sdma@63fb0000 { ...@@ -430,7 +430,7 @@ sdma: sdma@63fb0000 {
reg = <0x63fb0000 0x4000>; reg = <0x63fb0000 0x4000>;
interrupts = <6>; interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>, clocks = <&clks IMX5_CLK_SDMA_GATE>,
<&clks IMX5_CLK_SDMA_GATE>; <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb"; clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
}; };
...@@ -442,7 +442,7 @@ cspi: cspi@63fc0000 { ...@@ -442,7 +442,7 @@ cspi: cspi@63fc0000 {
reg = <0x63fc0000 0x4000>; reg = <0x63fc0000 0x4000>;
interrupts = <38>; interrupts = <38>;
clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
<&clks IMX5_CLK_CSPI_IPG_GATE>; <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -492,8 +492,8 @@ fec: ethernet@63fec000 { ...@@ -492,8 +492,8 @@ fec: ethernet@63fec000 {
reg = <0x63fec000 0x4000>; reg = <0x63fec000 0x4000>;
interrupts = <87>; interrupts = <87>;
clocks = <&clks IMX5_CLK_FEC_GATE>, clocks = <&clks IMX5_CLK_FEC_GATE>,
<&clks IMX5_CLK_FEC_GATE>, <&clks IMX5_CLK_FEC_GATE>,
<&clks IMX5_CLK_FEC_GATE>; <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp"; clock-names = "ipg", "ahb", "ptp";
status = "disabled"; status = "disabled";
}; };
......
...@@ -130,8 +130,8 @@ ipu: ipu@40000000 { ...@@ -130,8 +130,8 @@ ipu: ipu@40000000 {
reg = <0x40000000 0x20000000>; reg = <0x40000000 0x20000000>;
interrupts = <11 10>; interrupts = <11 10>;
clocks = <&clks IMX5_CLK_IPU_GATE>, clocks = <&clks IMX5_CLK_IPU_GATE>,
<&clks IMX5_CLK_IPU_DI0_GATE>, <&clks IMX5_CLK_IPU_DI0_GATE>,
<&clks IMX5_CLK_IPU_DI1_GATE>; <&clks IMX5_CLK_IPU_DI1_GATE>;
clock-names = "bus", "di0", "di1"; clock-names = "bus", "di0", "di1";
resets = <&src 2>; resets = <&src 2>;
...@@ -169,8 +169,8 @@ esdhc1: esdhc@70004000 { ...@@ -169,8 +169,8 @@ esdhc1: esdhc@70004000 {
reg = <0x70004000 0x4000>; reg = <0x70004000 0x4000>;
interrupts = <1>; interrupts = <1>;
clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>, <&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC1_PER_GATE>; <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per"; clock-names = "ipg", "ahb", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -180,8 +180,8 @@ esdhc2: esdhc@70008000 { ...@@ -180,8 +180,8 @@ esdhc2: esdhc@70008000 {
reg = <0x70008000 0x4000>; reg = <0x70008000 0x4000>;
interrupts = <2>; interrupts = <2>;
clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>, <&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC2_PER_GATE>; <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per"; clock-names = "ipg", "ahb", "per";
bus-width = <4>; bus-width = <4>;
status = "disabled"; status = "disabled";
...@@ -192,7 +192,7 @@ uart3: serial@7000c000 { ...@@ -192,7 +192,7 @@ uart3: serial@7000c000 {
reg = <0x7000c000 0x4000>; reg = <0x7000c000 0x4000>;
interrupts = <33>; interrupts = <33>;
clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
<&clks IMX5_CLK_UART3_PER_GATE>; <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -204,7 +204,7 @@ ecspi1: ecspi@70010000 { ...@@ -204,7 +204,7 @@ ecspi1: ecspi@70010000 {
reg = <0x70010000 0x4000>; reg = <0x70010000 0x4000>;
interrupts = <36>; interrupts = <36>;
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
<&clks IMX5_CLK_ECSPI1_PER_GATE>; <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -229,8 +229,8 @@ esdhc3: esdhc@70020000 { ...@@ -229,8 +229,8 @@ esdhc3: esdhc@70020000 {
reg = <0x70020000 0x4000>; reg = <0x70020000 0x4000>;
interrupts = <3>; interrupts = <3>;
clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>, <&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC3_PER_GATE>; <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per"; clock-names = "ipg", "ahb", "per";
bus-width = <4>; bus-width = <4>;
status = "disabled"; status = "disabled";
...@@ -241,8 +241,8 @@ esdhc4: esdhc@70024000 { ...@@ -241,8 +241,8 @@ esdhc4: esdhc@70024000 {
reg = <0x70024000 0x4000>; reg = <0x70024000 0x4000>;
interrupts = <4>; interrupts = <4>;
clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>, <&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC4_PER_GATE>; <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per"; clock-names = "ipg", "ahb", "per";
bus-width = <4>; bus-width = <4>;
status = "disabled"; status = "disabled";
...@@ -364,7 +364,7 @@ gpt: timer@73fa0000 { ...@@ -364,7 +364,7 @@ gpt: timer@73fa0000 {
reg = <0x73fa0000 0x4000>; reg = <0x73fa0000 0x4000>;
interrupts = <39>; interrupts = <39>;
clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
<&clks IMX5_CLK_GPT_HF_GATE>; <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
}; };
...@@ -378,7 +378,7 @@ pwm1: pwm@73fb4000 { ...@@ -378,7 +378,7 @@ pwm1: pwm@73fb4000 {
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
reg = <0x73fb4000 0x4000>; reg = <0x73fb4000 0x4000>;
clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
<&clks IMX5_CLK_PWM1_HF_GATE>; <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
interrupts = <61>; interrupts = <61>;
}; };
...@@ -388,7 +388,7 @@ pwm2: pwm@73fb8000 { ...@@ -388,7 +388,7 @@ pwm2: pwm@73fb8000 {
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
reg = <0x73fb8000 0x4000>; reg = <0x73fb8000 0x4000>;
clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
<&clks IMX5_CLK_PWM2_HF_GATE>; <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
interrupts = <94>; interrupts = <94>;
}; };
...@@ -398,7 +398,7 @@ uart1: serial@73fbc000 { ...@@ -398,7 +398,7 @@ uart1: serial@73fbc000 {
reg = <0x73fbc000 0x4000>; reg = <0x73fbc000 0x4000>;
interrupts = <31>; interrupts = <31>;
clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
<&clks IMX5_CLK_UART1_PER_GATE>; <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -408,7 +408,7 @@ uart2: serial@73fc0000 { ...@@ -408,7 +408,7 @@ uart2: serial@73fc0000 {
reg = <0x73fc0000 0x4000>; reg = <0x73fc0000 0x4000>;
interrupts = <32>; interrupts = <32>;
clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
<&clks IMX5_CLK_UART2_PER_GATE>; <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -456,7 +456,7 @@ ecspi2: ecspi@83fac000 { ...@@ -456,7 +456,7 @@ ecspi2: ecspi@83fac000 {
reg = <0x83fac000 0x4000>; reg = <0x83fac000 0x4000>;
interrupts = <37>; interrupts = <37>;
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
<&clks IMX5_CLK_ECSPI2_PER_GATE>; <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -466,7 +466,7 @@ sdma: sdma@83fb0000 { ...@@ -466,7 +466,7 @@ sdma: sdma@83fb0000 {
reg = <0x83fb0000 0x4000>; reg = <0x83fb0000 0x4000>;
interrupts = <6>; interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>, clocks = <&clks IMX5_CLK_SDMA_GATE>,
<&clks IMX5_CLK_SDMA_GATE>; <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb"; clock-names = "ipg", "ahb";
#dma-cells = <3>; #dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
...@@ -479,7 +479,7 @@ cspi: cspi@83fc0000 { ...@@ -479,7 +479,7 @@ cspi: cspi@83fc0000 {
reg = <0x83fc0000 0x4000>; reg = <0x83fc0000 0x4000>;
interrupts = <38>; interrupts = <38>;
clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
<&clks IMX5_CLK_CSPI_IPG_GATE>; <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -582,8 +582,8 @@ fec: ethernet@83fec000 { ...@@ -582,8 +582,8 @@ fec: ethernet@83fec000 {
reg = <0x83fec000 0x4000>; reg = <0x83fec000 0x4000>;
interrupts = <87>; interrupts = <87>;
clocks = <&clks IMX5_CLK_FEC_GATE>, clocks = <&clks IMX5_CLK_FEC_GATE>,
<&clks IMX5_CLK_FEC_GATE>, <&clks IMX5_CLK_FEC_GATE>,
<&clks IMX5_CLK_FEC_GATE>; <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp"; clock-names = "ipg", "ahb", "ptp";
status = "disabled"; status = "disabled";
}; };
......
...@@ -131,8 +131,8 @@ ipu: ipu@18000000 { ...@@ -131,8 +131,8 @@ ipu: ipu@18000000 {
reg = <0x18000000 0x08000000>; reg = <0x18000000 0x08000000>;
interrupts = <11 10>; interrupts = <11 10>;
clocks = <&clks IMX5_CLK_IPU_GATE>, clocks = <&clks IMX5_CLK_IPU_GATE>,
<&clks IMX5_CLK_IPU_DI0_GATE>, <&clks IMX5_CLK_IPU_DI0_GATE>,
<&clks IMX5_CLK_IPU_DI1_GATE>; <&clks IMX5_CLK_IPU_DI1_GATE>;
clock-names = "bus", "di0", "di1"; clock-names = "bus", "di0", "di1";
resets = <&src 2>; resets = <&src 2>;
...@@ -199,8 +199,8 @@ esdhc1: esdhc@50004000 { ...@@ -199,8 +199,8 @@ esdhc1: esdhc@50004000 {
reg = <0x50004000 0x4000>; reg = <0x50004000 0x4000>;
interrupts = <1>; interrupts = <1>;
clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>, <&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC1_PER_GATE>; <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per"; clock-names = "ipg", "ahb", "per";
bus-width = <4>; bus-width = <4>;
status = "disabled"; status = "disabled";
...@@ -211,8 +211,8 @@ esdhc2: esdhc@50008000 { ...@@ -211,8 +211,8 @@ esdhc2: esdhc@50008000 {
reg = <0x50008000 0x4000>; reg = <0x50008000 0x4000>;
interrupts = <2>; interrupts = <2>;
clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>, <&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC2_PER_GATE>; <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per"; clock-names = "ipg", "ahb", "per";
bus-width = <4>; bus-width = <4>;
status = "disabled"; status = "disabled";
...@@ -223,7 +223,7 @@ uart3: serial@5000c000 { ...@@ -223,7 +223,7 @@ uart3: serial@5000c000 {
reg = <0x5000c000 0x4000>; reg = <0x5000c000 0x4000>;
interrupts = <33>; interrupts = <33>;
clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
<&clks IMX5_CLK_UART3_PER_GATE>; <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
dmas = <&sdma 42 4 0>, <&sdma 43 4 0>; dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
dma-names = "rx", "tx"; dma-names = "rx", "tx";
...@@ -237,7 +237,7 @@ ecspi1: ecspi@50010000 { ...@@ -237,7 +237,7 @@ ecspi1: ecspi@50010000 {
reg = <0x50010000 0x4000>; reg = <0x50010000 0x4000>;
interrupts = <36>; interrupts = <36>;
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
<&clks IMX5_CLK_ECSPI1_PER_GATE>; <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -264,8 +264,8 @@ esdhc3: esdhc@50020000 { ...@@ -264,8 +264,8 @@ esdhc3: esdhc@50020000 {
reg = <0x50020000 0x4000>; reg = <0x50020000 0x4000>;
interrupts = <3>; interrupts = <3>;
clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>, <&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC3_PER_GATE>; <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per"; clock-names = "ipg", "ahb", "per";
bus-width = <4>; bus-width = <4>;
status = "disabled"; status = "disabled";
...@@ -276,8 +276,8 @@ esdhc4: esdhc@50024000 { ...@@ -276,8 +276,8 @@ esdhc4: esdhc@50024000 {
reg = <0x50024000 0x4000>; reg = <0x50024000 0x4000>;
interrupts = <4>; interrupts = <4>;
clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>, <&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC4_PER_GATE>; <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per"; clock-names = "ipg", "ahb", "per";
bus-width = <4>; bus-width = <4>;
status = "disabled"; status = "disabled";
...@@ -419,7 +419,7 @@ gpt: timer@53fa0000 { ...@@ -419,7 +419,7 @@ gpt: timer@53fa0000 {
reg = <0x53fa0000 0x4000>; reg = <0x53fa0000 0x4000>;
interrupts = <39>; interrupts = <39>;
clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
<&clks IMX5_CLK_GPT_HF_GATE>; <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
}; };
...@@ -440,11 +440,11 @@ ldb: ldb@53fa8008 { ...@@ -440,11 +440,11 @@ ldb: ldb@53fa8008 {
reg = <0x53fa8008 0x4>; reg = <0x53fa8008 0x4>;
gpr = <&gpr>; gpr = <&gpr>;
clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
<&clks IMX5_CLK_LDB_DI1_SEL>, <&clks IMX5_CLK_LDB_DI1_SEL>,
<&clks IMX5_CLK_IPU_DI0_SEL>, <&clks IMX5_CLK_IPU_DI0_SEL>,
<&clks IMX5_CLK_IPU_DI1_SEL>, <&clks IMX5_CLK_IPU_DI1_SEL>,
<&clks IMX5_CLK_LDB_DI0_GATE>, <&clks IMX5_CLK_LDB_DI0_GATE>,
<&clks IMX5_CLK_LDB_DI1_GATE>; <&clks IMX5_CLK_LDB_DI1_GATE>;
clock-names = "di0_pll", "di1_pll", clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel", "di0_sel", "di1_sel",
"di0", "di1"; "di0", "di1";
...@@ -486,7 +486,7 @@ pwm1: pwm@53fb4000 { ...@@ -486,7 +486,7 @@ pwm1: pwm@53fb4000 {
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>; reg = <0x53fb4000 0x4000>;
clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
<&clks IMX5_CLK_PWM1_HF_GATE>; <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
interrupts = <61>; interrupts = <61>;
}; };
...@@ -496,7 +496,7 @@ pwm2: pwm@53fb8000 { ...@@ -496,7 +496,7 @@ pwm2: pwm@53fb8000 {
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>; reg = <0x53fb8000 0x4000>;
clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
<&clks IMX5_CLK_PWM2_HF_GATE>; <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
interrupts = <94>; interrupts = <94>;
}; };
...@@ -506,7 +506,7 @@ uart1: serial@53fbc000 { ...@@ -506,7 +506,7 @@ uart1: serial@53fbc000 {
reg = <0x53fbc000 0x4000>; reg = <0x53fbc000 0x4000>;
interrupts = <31>; interrupts = <31>;
clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
<&clks IMX5_CLK_UART1_PER_GATE>; <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
dmas = <&sdma 18 4 0>, <&sdma 19 4 0>; dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
dma-names = "rx", "tx"; dma-names = "rx", "tx";
...@@ -518,7 +518,7 @@ uart2: serial@53fc0000 { ...@@ -518,7 +518,7 @@ uart2: serial@53fc0000 {
reg = <0x53fc0000 0x4000>; reg = <0x53fc0000 0x4000>;
interrupts = <32>; interrupts = <32>;
clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
<&clks IMX5_CLK_UART2_PER_GATE>; <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
dmas = <&sdma 12 4 0>, <&sdma 13 4 0>; dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
dma-names = "rx", "tx"; dma-names = "rx", "tx";
...@@ -530,7 +530,7 @@ can1: can@53fc8000 { ...@@ -530,7 +530,7 @@ can1: can@53fc8000 {
reg = <0x53fc8000 0x4000>; reg = <0x53fc8000 0x4000>;
interrupts = <82>; interrupts = <82>;
clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
<&clks IMX5_CLK_CAN1_SERIAL_GATE>; <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -540,7 +540,7 @@ can2: can@53fcc000 { ...@@ -540,7 +540,7 @@ can2: can@53fcc000 {
reg = <0x53fcc000 0x4000>; reg = <0x53fcc000 0x4000>;
interrupts = <83>; interrupts = <83>;
clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>, clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
<&clks IMX5_CLK_CAN2_SERIAL_GATE>; <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -603,7 +603,7 @@ uart4: serial@53ff0000 { ...@@ -603,7 +603,7 @@ uart4: serial@53ff0000 {
reg = <0x53ff0000 0x4000>; reg = <0x53ff0000 0x4000>;
interrupts = <13>; interrupts = <13>;
clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
<&clks IMX5_CLK_UART4_PER_GATE>; <&clks IMX5_CLK_UART4_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
dmas = <&sdma 2 4 0>, <&sdma 3 4 0>; dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
dma-names = "rx", "tx"; dma-names = "rx", "tx";
...@@ -635,7 +635,7 @@ uart5: serial@63f90000 { ...@@ -635,7 +635,7 @@ uart5: serial@63f90000 {
reg = <0x63f90000 0x4000>; reg = <0x63f90000 0x4000>;
interrupts = <86>; interrupts = <86>;
clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
<&clks IMX5_CLK_UART5_PER_GATE>; <&clks IMX5_CLK_UART5_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
dmas = <&sdma 16 4 0>, <&sdma 17 4 0>; dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
dma-names = "rx", "tx"; dma-names = "rx", "tx";
...@@ -656,7 +656,7 @@ ecspi2: ecspi@63fac000 { ...@@ -656,7 +656,7 @@ ecspi2: ecspi@63fac000 {
reg = <0x63fac000 0x4000>; reg = <0x63fac000 0x4000>;
interrupts = <37>; interrupts = <37>;
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
<&clks IMX5_CLK_ECSPI2_PER_GATE>; <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -666,7 +666,7 @@ sdma: sdma@63fb0000 { ...@@ -666,7 +666,7 @@ sdma: sdma@63fb0000 {
reg = <0x63fb0000 0x4000>; reg = <0x63fb0000 0x4000>;
interrupts = <6>; interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>, clocks = <&clks IMX5_CLK_SDMA_GATE>,
<&clks IMX5_CLK_SDMA_GATE>; <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb"; clock-names = "ipg", "ahb";
#dma-cells = <3>; #dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
...@@ -679,7 +679,7 @@ cspi: cspi@63fc0000 { ...@@ -679,7 +679,7 @@ cspi: cspi@63fc0000 {
reg = <0x63fc0000 0x4000>; reg = <0x63fc0000 0x4000>;
interrupts = <38>; interrupts = <38>;
clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
<&clks IMX5_CLK_CSPI_IPG_GATE>; <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
status = "disabled"; status = "disabled";
}; };
...@@ -755,8 +755,8 @@ fec: ethernet@63fec000 { ...@@ -755,8 +755,8 @@ fec: ethernet@63fec000 {
reg = <0x63fec000 0x4000>; reg = <0x63fec000 0x4000>;
interrupts = <87>; interrupts = <87>;
clocks = <&clks IMX5_CLK_FEC_GATE>, clocks = <&clks IMX5_CLK_FEC_GATE>,
<&clks IMX5_CLK_FEC_GATE>, <&clks IMX5_CLK_FEC_GATE>,
<&clks IMX5_CLK_FEC_GATE>; <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp"; clock-names = "ipg", "ahb", "ptp";
status = "disabled"; status = "disabled";
}; };
...@@ -766,7 +766,7 @@ tve: tve@63ff0000 { ...@@ -766,7 +766,7 @@ tve: tve@63ff0000 {
reg = <0x63ff0000 0x1000>; reg = <0x63ff0000 0x1000>;
interrupts = <92>; interrupts = <92>;
clocks = <&clks IMX5_CLK_TVE_GATE>, clocks = <&clks IMX5_CLK_TVE_GATE>,
<&clks IMX5_CLK_IPU_DI1_SEL>; <&clks IMX5_CLK_IPU_DI1_SEL>;
clock-names = "tve", "di_sel"; clock-names = "tve", "di_sel";
status = "disabled"; status = "disabled";
...@@ -782,7 +782,7 @@ vpu: vpu@63ff4000 { ...@@ -782,7 +782,7 @@ vpu: vpu@63ff4000 {
reg = <0x63ff4000 0x1000>; reg = <0x63ff4000 0x1000>;
interrupts = <9>; interrupts = <9>;
clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
<&clks IMX5_CLK_VPU_GATE>; <&clks IMX5_CLK_VPU_GATE>;
clock-names = "per", "ahb"; clock-names = "per", "ahb";
resets = <&src 1>; resets = <&src 1>;
iram = <&ocram>; iram = <&ocram>;
...@@ -793,7 +793,7 @@ sahara: crypto@63ff8000 { ...@@ -793,7 +793,7 @@ sahara: crypto@63ff8000 {
reg = <0x63ff8000 0x4000>; reg = <0x63ff8000 0x4000>;
interrupts = <19 20>; interrupts = <19 20>;
clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
<&clks IMX5_CLK_SAHARA_IPG_GATE>; <&clks IMX5_CLK_SAHARA_IPG_GATE>;
clock-names = "ipg", "ahb"; clock-names = "ipg", "ahb";
}; };
}; };
......
...@@ -390,7 +390,7 @@ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 /* AR8035 pin strapping: MODE#1: pull ...@@ -390,7 +390,7 @@ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 /* AR8035 pin strapping: MODE#1: pull
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */
MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
>; >;
......
...@@ -105,7 +105,7 @@ ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ ...@@ -105,7 +105,7 @@ ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
pixelclk-active = <1>; pixelclk-active = <1>;
}; };
}; };
}; };
}; };
&can1 { &can1 {
......
...@@ -199,7 +199,7 @@ ETQ570 { ...@@ -199,7 +199,7 @@ ETQ570 {
pixelclk-active = <0>; pixelclk-active = <0>;
}; };
}; };
}; };
}; };
&ipu1_di0_disp0 { &ipu1_di0_disp0 {
......
...@@ -23,5 +23,5 @@ chosen { ...@@ -23,5 +23,5 @@ chosen {
}; };
&sata { &sata {
status = "okay"; status = "okay";
}; };
...@@ -105,7 +105,7 @@ ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ ...@@ -105,7 +105,7 @@ ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
pixelclk-active = <1>; pixelclk-active = <1>;
}; };
}; };
}; };
}; };
&can1 { &can1 {
......
...@@ -199,7 +199,7 @@ ETQ570 { ...@@ -199,7 +199,7 @@ ETQ570 {
pixelclk-active = <0>; pixelclk-active = <0>;
}; };
}; };
}; };
}; };
&ipu1_di0_disp0 { &ipu1_di0_disp0 {
......
...@@ -105,7 +105,7 @@ ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ ...@@ -105,7 +105,7 @@ ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
pixelclk-active = <1>; pixelclk-active = <1>;
}; };
}; };
}; };
}; };
&can1 { &can1 {
......
...@@ -199,7 +199,7 @@ ETQ570 { ...@@ -199,7 +199,7 @@ ETQ570 {
pixelclk-active = <0>; pixelclk-active = <0>;
}; };
}; };
}; };
}; };
&ds1339 { &ds1339 {
......
...@@ -192,10 +192,10 @@ &i2c3 { ...@@ -192,10 +192,10 @@ &i2c3 {
}; };
&i2c4 { &i2c4 {
clock-frequency = <100000>; clock-frequency = <100000>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>; pinctrl-0 = <&pinctrl_i2c4>;
status = "okay"; status = "okay";
codec: wm8962@1a { codec: wm8962@1a {
compatible = "wlf,wm8962"; compatible = "wlf,wm8962";
......
...@@ -858,7 +858,7 @@ fec1: ethernet@02188000 { ...@@ -858,7 +858,7 @@ fec1: ethernet@02188000 {
fsl,num-tx-queues=<3>; fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>; fsl,num-rx-queues=<3>;
status = "disabled"; status = "disabled";
}; };
mlb: mlb@0218c000 { mlb: mlb@0218c000 {
reg = <0x0218c000 0x4000>; reg = <0x0218c000 0x4000>;
...@@ -1181,7 +1181,7 @@ adc1: adc@02280000 { ...@@ -1181,7 +1181,7 @@ adc1: adc@02280000 {
fsl,adck-max-frequency = <30000000>, <40000000>, fsl,adck-max-frequency = <30000000>, <40000000>,
<20000000>; <20000000>;
status = "disabled"; status = "disabled";
}; };
adc2: adc@02284000 { adc2: adc@02284000 {
compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
...@@ -1192,7 +1192,7 @@ adc2: adc@02284000 { ...@@ -1192,7 +1192,7 @@ adc2: adc@02284000 {
fsl,adck-max-frequency = <30000000>, <40000000>, fsl,adck-max-frequency = <30000000>, <40000000>,
<20000000>; <20000000>;
status = "disabled"; status = "disabled";
}; };
wdog3: wdog@02288000 { wdog3: wdog@02288000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment