Commit 463654ce authored by Axel Lin's avatar Axel Lin Committed by Mark Brown

spi: sc18is602: Convert to use bits_per_word_mask

Since commit 543bb255 "spi: add ability to validate xfer->bits_per_word in SPI
core", the driver can set bits_per_word_mask for the master then the SPI core
will reject transfers that attempt to use an unsupported bits_per_word value.
So we can remove the bits_per_word checking in sc18is602_check_transfer() and
let SPI core handle the checking.
Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
Acked-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 15e0964d
...@@ -183,18 +183,11 @@ static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode) ...@@ -183,18 +183,11 @@ static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode)
static int sc18is602_check_transfer(struct spi_device *spi, static int sc18is602_check_transfer(struct spi_device *spi,
struct spi_transfer *t, int tlen) struct spi_transfer *t, int tlen)
{ {
int bpw;
uint32_t hz; uint32_t hz;
if (t && t->len + tlen > SC18IS602_BUFSIZ) if (t && t->len + tlen > SC18IS602_BUFSIZ)
return -EINVAL; return -EINVAL;
bpw = spi->bits_per_word;
if (t && t->bits_per_word)
bpw = t->bits_per_word;
if (bpw != 8)
return -EINVAL;
hz = spi->max_speed_hz; hz = spi->max_speed_hz;
if (t && t->speed_hz) if (t && t->speed_hz)
hz = t->speed_hz; hz = t->speed_hz;
...@@ -315,6 +308,7 @@ static int sc18is602_probe(struct i2c_client *client, ...@@ -315,6 +308,7 @@ static int sc18is602_probe(struct i2c_client *client,
} }
master->bus_num = client->adapter->nr; master->bus_num = client->adapter->nr;
master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST; master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->setup = sc18is602_setup; master->setup = sc18is602_setup;
master->transfer_one_message = sc18is602_transfer_one; master->transfer_one_message = sc18is602_transfer_one;
master->dev.of_node = np; master->dev.of_node = np;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment