Commit 46448483 authored by Deepak M's avatar Deepak M Committed by Jani Nikula

drm/i915/glk: Add MIPIIO Enable/disable sequence

v2: Addressed Jani's Review comments(renamed bit field macros)
v3: Jani's Review comment for aligning code to platforms and added
wrapper functions.
v4: Corrected enable/disable seuqence as per BSPEC
v5: Corrected waiting twice for same bit (Review comments: Jani)
v6: Rebased to Han's patches(dsi restructuring code)
Signed-off-by: default avatarDeepak M <m.deepak@intel.com>
Signed-off-by: default avatarMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488352893-29916-2-git-send-email-madhav.chauhan@intel.com
parent f4c3a88e
......@@ -357,6 +357,109 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
return true;
}
static void glk_dsi_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
u32 tmp, val;
/* Set the MIPI mode
* If MIPI_Mode is off, then writing to LP_Wake bit is not reflecting.
* Power ON MIPI IO first and then write into IO reset and LP wake bits
*/
for_each_dsi_port(port, intel_dsi->ports) {
tmp = I915_READ(MIPI_CTRL(port));
I915_WRITE(MIPI_CTRL(port), tmp | GLK_MIPIIO_ENABLE);
}
/* Put the IO into reset */
tmp = I915_READ(MIPI_CTRL(PORT_A));
tmp &= ~GLK_MIPIIO_RESET_RELEASED;
I915_WRITE(MIPI_CTRL(PORT_A), tmp);
/* Program LP Wake */
for_each_dsi_port(port, intel_dsi->ports) {
tmp = I915_READ(MIPI_CTRL(port));
tmp |= GLK_LP_WAKE;
I915_WRITE(MIPI_CTRL(port), tmp);
}
/* Wait for Pwr ACK */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port), GLK_MIPIIO_PORT_POWERED,
GLK_MIPIIO_PORT_POWERED, 20))
DRM_ERROR("MIPIO port is powergated\n");
}
/* Wait for MIPI PHY status bit to set */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port), GLK_PHY_STATUS_PORT_READY,
GLK_PHY_STATUS_PORT_READY, 20))
DRM_ERROR("PHY is not ON\n");
}
/* Get IO out of reset */
tmp = I915_READ(MIPI_CTRL(PORT_A));
I915_WRITE(MIPI_CTRL(PORT_A), tmp | GLK_MIPIIO_RESET_RELEASED);
/* Get IO out of Low power state*/
for_each_dsi_port(port, intel_dsi->ports) {
if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY)) {
val = I915_READ(MIPI_DEVICE_READY(port));
val &= ~ULPS_STATE_MASK;
val |= DEVICE_READY;
I915_WRITE(MIPI_DEVICE_READY(port), val);
usleep_range(10, 15);
}
/* Enter ULPS */
val = I915_READ(MIPI_DEVICE_READY(port));
val &= ~ULPS_STATE_MASK;
val |= (ULPS_STATE_ENTER | DEVICE_READY);
I915_WRITE(MIPI_DEVICE_READY(port), val);
/* Wait for ULPS Not active */
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE,
GLK_ULPS_NOT_ACTIVE, 20))
/* Exit ULPS */
val = I915_READ(MIPI_DEVICE_READY(port));
val &= ~ULPS_STATE_MASK;
val |= (ULPS_STATE_EXIT | DEVICE_READY);
I915_WRITE(MIPI_DEVICE_READY(port), val);
/* Enter Normal Mode */
val = I915_READ(MIPI_DEVICE_READY(port));
val &= ~ULPS_STATE_MASK;
val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY);
I915_WRITE(MIPI_DEVICE_READY(port), val);
tmp = I915_READ(MIPI_CTRL(port));
tmp &= ~GLK_LP_WAKE;
I915_WRITE(MIPI_CTRL(port), tmp);
}
/* Wait for Stop state */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port), GLK_DATA_LANE_STOP_STATE,
GLK_DATA_LANE_STOP_STATE, 20))
DRM_ERROR("Date lane not in STOP state\n");
}
/* Wait for AFE LATCH */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
BXT_MIPI_PORT_CTRL(port), AFE_LATCHOUT,
AFE_LATCHOUT, 20))
DRM_ERROR("D-PHY not entering LP-11 state\n");
}
}
static void bxt_dsi_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
......@@ -429,11 +532,79 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder)
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
vlv_dsi_device_ready(encoder);
else if (IS_GEN9_LP(dev_priv))
else if (IS_BROXTON(dev_priv))
bxt_dsi_device_ready(encoder);
else if (IS_GEMINILAKE(dev_priv))
glk_dsi_device_ready(encoder);
}
static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
static void glk_dsi_enter_low_power_mode(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
u32 val;
/* Enter ULPS */
for_each_dsi_port(port, intel_dsi->ports) {
val = I915_READ(MIPI_DEVICE_READY(port));
val &= ~ULPS_STATE_MASK;
val |= (ULPS_STATE_ENTER | DEVICE_READY);
I915_WRITE(MIPI_DEVICE_READY(port), val);
}
/* Wait for MIPI PHY status bit to unset */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port),
GLK_PHY_STATUS_PORT_READY, 0, 20))
DRM_ERROR("PHY is not turning OFF\n");
}
/* Wait for Pwr ACK bit to unset */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port),
GLK_MIPIIO_PORT_POWERED, 0, 20))
DRM_ERROR("MIPI IO Port is not powergated\n");
}
}
static void glk_dsi_disable_mipi_io(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
u32 tmp;
/* Put the IO into reset */
tmp = I915_READ(MIPI_CTRL(PORT_A));
tmp &= ~GLK_MIPIIO_RESET_RELEASED;
I915_WRITE(MIPI_CTRL(PORT_A), tmp);
/* Wait for MIPI PHY status bit to unset */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_wait_for_register(dev_priv,
MIPI_CTRL(port),
GLK_PHY_STATUS_PORT_READY, 0, 20))
DRM_ERROR("PHY is not turning OFF\n");
}
/* Clear MIPI mode */
for_each_dsi_port(port, intel_dsi->ports) {
tmp = I915_READ(MIPI_CTRL(port));
tmp &= ~GLK_MIPIIO_ENABLE;
I915_WRITE(MIPI_CTRL(port), tmp);
}
}
static void glk_dsi_clear_device_ready(struct intel_encoder *encoder)
{
glk_dsi_enter_low_power_mode(encoder);
glk_dsi_disable_mipi_io(encoder);
}
static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
......@@ -670,6 +841,17 @@ static void intel_dsi_pre_disable(struct intel_encoder *encoder,
}
}
static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv) ||
IS_BROXTON(dev_priv))
vlv_dsi_clear_device_ready(encoder);
else if (IS_GEMINILAKE(dev_priv))
glk_dsi_clear_device_ready(encoder);
}
static void intel_dsi_post_disable(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
......@@ -1314,18 +1496,20 @@ static void intel_dsi_unprepare(struct intel_encoder *encoder)
enum port port;
u32 val;
for_each_dsi_port(port, intel_dsi->ports) {
/* Panel commands can be sent when clock is in LP11 */
I915_WRITE(MIPI_DEVICE_READY(port), 0x0);
if (!IS_GEMINILAKE(dev_priv)) {
for_each_dsi_port(port, intel_dsi->ports) {
/* Panel commands can be sent when clock is in LP11 */
I915_WRITE(MIPI_DEVICE_READY(port), 0x0);
intel_dsi_reset_clocks(encoder, port);
I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
intel_dsi_reset_clocks(encoder, port);
I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
val = I915_READ(MIPI_DSI_FUNC_PRG(port));
val &= ~VID_MODE_FORMAT_MASK;
I915_WRITE(MIPI_DSI_FUNC_PRG(port), val);
val = I915_READ(MIPI_DSI_FUNC_PRG(port));
val &= ~VID_MODE_FORMAT_MASK;
I915_WRITE(MIPI_DSI_FUNC_PRG(port), val);
I915_WRITE(MIPI_DEVICE_READY(port), 0x1);
I915_WRITE(MIPI_DEVICE_READY(port), 0x1);
}
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment