staging: ctx1e1: remove checks for three macros

When the ctx1e1 driver was added in v2.6.35 it contained checks for
CONFIG_SBE_HDLC_V7, CONFIG_SBE_WAN256T3_HDLC_V7, and
CONFIG_SBE_WAN256T3_NCOMM (and MODULE variants). The related Kconfig
symbols didn't exist then. They still don't exist now. Remove these
checks.

Do some related cleaning up and remove the unused V7() macro too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/cxt1e1/functions.c

@@ -24,24 +24,6 @@
 #include "libsbew.h"
 #include "pmcc4.h"
 
-#if defined(CONFIG_SBE_HDLC_V7) || defined(CONFIG_SBE_WAN256T3_HDLC_V7) || \
-defined(CONFIG_SBE_HDLC_V7_MODULE) || \
-defined(CONFIG_SBE_WAN256T3_HDLC_V7_MODULE)
-#define _v7_hdlc_  1
-#else
-#define _v7_hdlc_  0
-#endif
-
-#if _v7_hdlc_
-#define V7(x) (x ## _v7)
-extern int  hdlc_netif_rx_v7(hdlc_device *, struct sk_buff *);
-extern int  register_hdlc_device_v7(hdlc_device *);
-extern int  unregister_hdlc_device_v7(hdlc_device *);
-
-#else
-#define V7(x) x
-#endif
-
 
 #ifndef USE_MAX_INT_DELAY
 static int  dummy = 0;

drivers/staging/cxt1e1/linux.c

@@ -83,23 +83,6 @@ int         musycc_start_xmit(ci_t *, int, void *);
 extern ci_t *CI;
 extern struct s_hdw_info hdw_info[];
 
-#if defined(CONFIG_SBE_HDLC_V7) || defined(CONFIG_SBE_WAN256T3_HDLC_V7) || \
-	defined(CONFIG_SBE_HDLC_V7_MODULE) || defined(CONFIG_SBE_WAN256T3_HDLC_V7_MODULE)
-#define _v7_hdlc_  1
-#else
-#define _v7_hdlc_  0
-#endif
-
-#if _v7_hdlc_
-#define V7(x) (x ## _v7)
-extern int  hdlc_netif_rx_v7(hdlc_device *, struct sk_buff *);
-extern int  register_hdlc_device_v7(hdlc_device *);
-extern int  unregister_hdlc_device_v7(hdlc_device *);
-
-#else
-#define V7(x) x
-#endif
-
 int         error_flag;         /* module load error reporting */
 int         cxt1e1_log_level = LOG_ERROR;
 static int  log_level_default = LOG_ERROR;

drivers/staging/cxt1e1/musycc.c

@@ -918,9 +918,6 @@ musycc_bh_tx_eom(mpi_t *pi, int gchan)
 
 		md->data = 0;
 		if (md->mem_token) {
-#ifdef CONFIG_SBE_WAN256T3_NCOMM
-			int hdlcnum = 0;
-#endif
 			/* upcount channel */
 			atomic_sub(OS_mem_token_tlen(md->mem_token),
 				   &ch->tx_pending);
@@ -931,18 +928,6 @@ musycc_bh_tx_eom(mpi_t *pi, int gchan)
 			if (!atomic_read(&pi->up->tx_pending))
 				wan256t3_led(pi->up, LED_TX, 0);
 #endif
-
-#ifdef CONFIG_SBE_WAN256T3_NCOMM
-			/* callback that our packet was sent */
-			hdlcnum = (pi->portnum * 32 + gchan);
-
-			if (hdlcnum >= 228) {
-				if (nciProcess_TX_complete)
-					(*nciProcess_TX_complete) (hdlcnum,
-							getuserbychan(gchan));
-			}
-#endif /* CONFIG_SBE_WAN256T3_NCOMM */
-
 			OS_mem_token_free_irq(md->mem_token);
 			md->mem_token = NULL;
 		}
@@ -1039,21 +1024,6 @@ musycc_bh_rx_eom(mpi_t *pi, int gchan)
 		m = md->mem_token;
 		error = (status >> 16) & 0xf;
 		if (error == 0) {
-#ifdef CONFIG_SBE_WAN256T3_NCOMM
-			int         hdlcnum = (pi->portnum * 32 + gchan);
-
-			/*
-			 * if the packet number belongs to NCOMM, then send it to the TMS
-			 * driver
-			 */
-			if (hdlcnum >= 228) {
-				if (nciProcess_RX_packet)
-					(*nciProcess_RX_packet)(hdlcnum,
-								status & 0x3fff,
-								m, ch->user);
-			} else
-#endif                              /*** CONFIG_SBE_WAN256T3_NCOMM ***/
-
 			{
 				m2 = OS_mem_token_alloc(cxt1e1_max_mru);
 				if (m2) {