drivers/rtc/rtc-ds1305.c: add missing braces around sizeof

Silences the following type of warnings:

  WARNING: sizeof buf should be sizeof(buf)
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-ds1305.c

@@ -158,7 +158,7 @@ static int ds1305_alarm_irq_enable(struct device *dev, unsigned int enabled)
 			goto done;
 		buf[1] &= ~DS1305_AEI0;
 	}
-	err = spi_write_then_read(ds1305->spi, buf, sizeof buf, NULL, 0);
+	err = spi_write_then_read(ds1305->spi, buf, sizeof(buf), NULL, 0);
 	if (err >= 0)
 		ds1305->ctrl[0] = buf[1];
 done:
@@ -181,8 +181,8 @@ static int ds1305_get_time(struct device *dev, struct rtc_time *time)
 	/* Use write-then-read to get all the date/time registers
 	 * since dma from stack is nonportable
 	 */
-	status = spi_write_then_read(ds1305->spi, &addr, sizeof addr,
-			buf, sizeof buf);
+	status = spi_write_then_read(ds1305->spi, &addr, sizeof(addr),
+			buf, sizeof(buf));
 	if (status < 0)
 		return status;
 
@@ -237,7 +237,7 @@ static int ds1305_set_time(struct device *dev, struct rtc_time *time)
 		buf[4], buf[5], buf[6], buf[7]);
 
 	/* use write-then-read since dma from stack is nonportable */
-	return spi_write_then_read(ds1305->spi, buf, sizeof buf,
+	return spi_write_then_read(ds1305->spi, buf, sizeof(buf),
 			NULL, 0);
 }
 
@@ -286,8 +286,8 @@ static int ds1305_get_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	 * of EFI status is at best fragile anyway (given IRQ handlers).
 	 */
 	addr = DS1305_CONTROL;
-	status = spi_write_then_read(spi, &addr, sizeof addr,
-			ds1305->ctrl, sizeof ds1305->ctrl);
+	status = spi_write_then_read(spi, &addr, sizeof(addr),
+			ds1305->ctrl, sizeof(ds1305->ctrl));
 	if (status < 0)
 		return status;
 
@@ -296,8 +296,8 @@ static int ds1305_get_alarm(struct device *dev, struct rtc_wkalrm *alm)
 
 	/* get and check ALM0 registers */
 	addr = DS1305_ALM0(DS1305_SEC);
-	status = spi_write_then_read(spi, &addr, sizeof addr,
-			buf, sizeof buf);
+	status = spi_write_then_read(spi, &addr, sizeof(addr),
+			buf, sizeof(buf));
 	if (status < 0)
 		return status;
 
@@ -381,7 +381,7 @@ static int ds1305_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 		"alm0 write", buf[1 + DS1305_SEC], buf[1 + DS1305_MIN],
 		buf[1 + DS1305_HOUR], buf[1 + DS1305_WDAY]);
 
-	status = spi_write_then_read(spi, buf, sizeof buf, NULL, 0);
+	status = spi_write_then_read(spi, buf, sizeof(buf), NULL, 0);
 	if (status < 0)
 		return status;
 
@@ -474,7 +474,7 @@ static void ds1305_work(struct work_struct *work)
 	buf[1] = ds1305->ctrl[0];
 	buf[2] = 0;
 
-	status = spi_write_then_read(spi, buf, sizeof buf,
+	status = spi_write_then_read(spi, buf, sizeof(buf),
 			NULL, 0);
 	if (status < 0)
 		dev_dbg(&spi->dev, "clear irq --> %d\n", status);
@@ -627,8 +627,8 @@ static int ds1305_probe(struct spi_device *spi)
 
 	/* read and cache control registers */
 	addr = DS1305_CONTROL;
-	status = spi_write_then_read(spi, &addr, sizeof addr,
-			ds1305->ctrl, sizeof ds1305->ctrl);
+	status = spi_write_then_read(spi, &addr, sizeof(addr),
+			ds1305->ctrl, sizeof(ds1305->ctrl));
 	if (status < 0) {
 		dev_dbg(&spi->dev, "can't %s, %d\n",
 				"read", status);
@@ -659,7 +659,7 @@ static int ds1305_probe(struct spi_device *spi)
 
 		buf[0] = DS1305_WRITE | DS1305_CONTROL;
 		buf[1] = ds1305->ctrl[0];
-		status = spi_write_then_read(spi, buf, sizeof buf, NULL, 0);
+		status = spi_write_then_read(spi, buf, sizeof(buf), NULL, 0);
 
 		dev_dbg(&spi->dev, "clear WP --> %d\n", status);
 		if (status < 0)
@@ -713,7 +713,7 @@ static int ds1305_probe(struct spi_device *spi)
 		buf[1] = ds1305->ctrl[0];
 		buf[2] = ds1305->ctrl[1];
 		buf[3] = ds1305->ctrl[2];
-		status = spi_write_then_read(spi, buf, sizeof buf, NULL, 0);
+		status = spi_write_then_read(spi, buf, sizeof(buf), NULL, 0);
 		if (status < 0) {
 			dev_dbg(&spi->dev, "can't %s, %d\n",
 					"write", status);
@@ -725,8 +725,8 @@ static int ds1305_probe(struct spi_device *spi)
 
 	/* see if non-Linux software set up AM/PM mode */
 	addr = DS1305_HOUR;
-	status = spi_write_then_read(spi, &addr, sizeof addr,
-				&value, sizeof value);
+	status = spi_write_then_read(spi, &addr, sizeof(addr),
+				&value, sizeof(value));
 	if (status < 0) {
 		dev_dbg(&spi->dev, "read HOUR --> %d\n", status);
 		return status;