Merge branch 'topic/rcar' into for-linus

Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt

@@ -5,9 +5,6 @@ controller instances named DMAC capable of serving multiple clients. Channels
 can be dedicated to specific clients or shared between a large number of
 clients.
 
-DMA clients are connected to the DMAC ports referenced by an 8-bit identifier
-called MID/RID.
-
 Each DMA client is connected to one dedicated port of the DMAC, identified by
 an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
 256 clients in total. When the number of hardware channels is lower than the

drivers/dma/Makefile

@@ -19,7 +19,7 @@ obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
 obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
 obj-$(CONFIG_MX3_IPU) += ipu/
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
-obj-$(CONFIG_SH_DMAE_BASE) += sh/
+obj-$(CONFIG_RENESAS_DMA) += sh/
 obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
 obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/
 obj-$(CONFIG_IMX_SDMA) += imx-sdma.o

drivers/dma/sh/Kconfig

@@ -2,6 +2,10 @@
 # DMA engine configuration for sh
 #
 
+config RENESAS_DMA
+	bool
+	select DMA_ENGINE
+
 #
 # DMA Engine Helpers
 #
@@ -12,7 +16,7 @@ config SH_DMAE_BASE
 	depends on !SUPERH || SH_DMA
 	depends on !SH_DMA_API
 	default y
-	select DMA_ENGINE
+	select RENESAS_DMA
 	help
 	  Enable support for the Renesas SuperH DMA controllers.
 
@@ -52,3 +56,11 @@ config RCAR_AUDMAC_PP
 	depends on SH_DMAE_BASE
 	help
 	  Enable support for the Renesas R-Car Audio DMAC Peripheral Peripheral controllers.
+
+config RCAR_DMAC
+	tristate "Renesas R-Car Gen2 DMA Controller"
+	depends on ARCH_SHMOBILE || COMPILE_TEST
+	select RENESAS_DMA
+	help
+	  This driver supports the general purpose DMA controller found in the
+	  Renesas R-Car second generation SoCs.

drivers/dma/sh/Makefile

@@ -16,3 +16,4 @@ obj-$(CONFIG_SH_DMAE) += shdma.o
 obj-$(CONFIG_SUDMAC) += sudmac.o
 obj-$(CONFIG_RCAR_HPB_DMAE) += rcar-hpbdma.o
 obj-$(CONFIG_RCAR_AUDMAC_PP) += rcar-audmapp.o
+obj-$(CONFIG_RCAR_DMAC) += rcar-dmac.o

include/linux/dmaengine.h

@@ -279,6 +279,9 @@ enum dma_slave_buswidth {
 	DMA_SLAVE_BUSWIDTH_3_BYTES = 3,
 	DMA_SLAVE_BUSWIDTH_4_BYTES = 4,
 	DMA_SLAVE_BUSWIDTH_8_BYTES = 8,
+	DMA_SLAVE_BUSWIDTH_16_BYTES = 16,
+	DMA_SLAVE_BUSWIDTH_32_BYTES = 32,
+	DMA_SLAVE_BUSWIDTH_64_BYTES = 64,
 };
 
 /**