Commit 4712fff9 authored by Stephen Rothwell's avatar Stephen Rothwell Committed by Benjamin Herrenschmidt

powerpc: More printing warning fixes for the l64 to ll64 conversion

These are all powerpc specific drivers.

res.start in fsl_elbc_nand.c needs to be cast since it may be either 32
or 64 bit.  Thanks to Scott Wood for noticing.
Signed-off-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de> call_edac bits in particular
Acked-by: Olof Johansson <olof@lixom.net> pasemi_nand peices
Acked-by: Scott Wood <scottwood@freescale.com> fsl_elbc fixes
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 52c275fe
......@@ -36,7 +36,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar)
struct csrow_info *csrow = &mci->csrows[0];
unsigned long address, pfn, offset, syndrome;
dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016lx\n",
dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n",
priv->node, chan, ar);
/* Address decoding is likely a bit bogus, to dbl check */
......@@ -58,7 +58,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar)
struct csrow_info *csrow = &mci->csrows[0];
unsigned long address, pfn, offset;
dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016lx\n",
dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n",
priv->node, chan, ar);
/* Address decoding is likely a bit bogus, to dbl check */
......@@ -169,7 +169,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev)
/* Get channel population */
reg = in_be64(&regs->mic_mnt_cfg);
dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg);
dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg);
chanmask = 0;
if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP)
chanmask |= 0x1;
......@@ -180,7 +180,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev)
"Yuck ! No channel populated ? Aborting !\n");
return -ENODEV;
}
dev_dbg(&pdev->dev, "Initial FIR = 0x%016lx\n",
dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n",
in_be64(&regs->mic_fir));
/* Allocate & init EDAC MC data structure */
......
......@@ -676,7 +676,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n",
chip->numchips);
dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %ld\n",
dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
chip->chipsize);
dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
chip->pagemask);
......@@ -703,7 +703,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
chip->ecc.layout);
dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %d\n", mtd->size);
dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
mtd->erasesize);
dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n",
......@@ -932,8 +932,8 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
#endif
add_mtd_device(&priv->mtd);
printk(KERN_INFO "eLBC NAND device at 0x%zx, bank %d\n",
res.start, priv->bank);
printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
(unsigned long long)res.start, priv->bank);
return 0;
err:
......
......@@ -107,7 +107,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev,
if (pasemi_nand_mtd)
return -ENODEV;
pr_debug("pasemi_nand at %lx-%lx\n", res.start, res.end);
pr_debug("pasemi_nand at %llx-%llx\n", res.start, res.end);
/* Allocate memory for MTD device structure and private data */
pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) +
......@@ -170,7 +170,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev,
goto out_lpc;
}
printk(KERN_INFO "PA Semi NAND flash at %08lx, control at I/O %x\n",
printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n",
res.start, lpcctl);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment