Commit 47131258 authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Paul Mundt

sh: ap325rxa: Add ov772x support, again.

Now that the V4L bits have finally settled..

This patch adds support for a secondary ov772x camera on ap325rxa.
This is supported in addition to the regular soc_camera_platform camera.
Signed-off-by: default avatarKuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: default avatarMagnus Damm <damm@igel.co.jp>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 3b4df71b
......@@ -22,6 +22,7 @@
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <media/ov772x.h>
#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
#include <media/sh_mobile_ceu.h>
......@@ -235,6 +236,7 @@ static void camera_power(int val)
}
#ifdef CONFIG_I2C
/* support for the old ncm03j camera */
static unsigned char camera_ncm03j_magic[] =
{
0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
......@@ -255,6 +257,23 @@ static unsigned char camera_ncm03j_magic[] =
0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
};
static int camera_probe(void)
{
struct i2c_adapter *a = i2c_get_adapter(0);
struct i2c_msg msg;
int ret;
camera_power(1);
msg.addr = 0x6e;
msg.buf = camera_ncm03j_magic;
msg.len = 2;
msg.flags = 0;
ret = i2c_transfer(a, &msg, 1);
camera_power(0);
return ret;
}
static int camera_set_capture(struct soc_camera_platform_info *info,
int enable)
{
......@@ -306,8 +325,35 @@ static struct platform_device camera_device = {
.platform_data = &camera_info,
},
};
static int __init camera_setup(void)
{
if (camera_probe() > 0)
platform_device_register(&camera_device);
return 0;
}
late_initcall(camera_setup);
#endif /* CONFIG_I2C */
static int ov7725_power(struct device *dev, int mode)
{
camera_power(0);
if (mode)
camera_power(1);
return 0;
}
static struct ov772x_camera_info ov7725_info = {
.buswidth = SOCAM_DATAWIDTH_8,
.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
.link = {
.power = ov7725_power,
},
};
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_HIGH | SOCAM_MASTER |
......@@ -359,9 +405,6 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
&ap325rxa_nor_flash_device,
&lcdc_device,
&ceu_device,
#ifdef CONFIG_I2C
&camera_device,
#endif
&nand_flash_device,
&sdcard_cn3_device,
};
......@@ -370,6 +413,10 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
},
{
I2C_BOARD_INFO("ov772x", 0x21),
.platform_data = &ov7725_info,
},
};
static struct spi_board_info ap325rxa_spi_devices[] = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment