Commit 472ac3dc authored by Alexandre Belloni's avatar Alexandre Belloni Committed by Thierry Reding

pwm: atmel: Fix incorrect CDTY value after disabling

pwm-leds calls .config() and .disable() in a row. This exhibits that it
may happen that the channel gets disabled before CDTY has been updated
with CUPD. The issue gets quite worse with long periods. So, ensure that
at least one period has past before disabling the channel by polling
ISR.
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: default avatarGaël PORTAY <gael.portay@gmail.com>
Signed-off-by: default avatarThierry Reding <thierry.reding@gmail.com>
parent 4c027f7b
......@@ -8,9 +8,11 @@
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
......@@ -21,6 +23,7 @@
#define PWM_ENA 0x04
#define PWM_DIS 0x08
#define PWM_SR 0x0C
#define PWM_ISR 0x1C
/* Bit field in SR */
#define PWM_SR_ALL_CH_ON 0x0F
......@@ -60,6 +63,9 @@ struct atmel_pwm_chip {
struct clk *clk;
void __iomem *base;
unsigned int updated_pwms;
struct mutex isr_lock; /* ISR is cleared when read, ensure only one thread does that */
void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
unsigned long dty, unsigned long prd);
};
......@@ -144,6 +150,10 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK);
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
atmel_pwm->config(chip, pwm, dty, prd);
mutex_lock(&atmel_pwm->isr_lock);
atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
atmel_pwm->updated_pwms &= ~(1 << pwm->hwpwm);
mutex_unlock(&atmel_pwm->isr_lock);
clk_disable(atmel_pwm->clk);
return ret;
......@@ -243,7 +253,22 @@ static int atmel_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
unsigned long timeout = jiffies + 2 * HZ;
/*
* Wait for at least a complete period to have passed before disabling a
* channel to be sure that CDTY has been updated
*/
mutex_lock(&atmel_pwm->isr_lock);
atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
while (!(atmel_pwm->updated_pwms & (1 << pwm->hwpwm)) &&
time_before(jiffies, timeout)) {
usleep_range(10, 100);
atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
}
mutex_unlock(&atmel_pwm->isr_lock);
atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm);
clk_disable(atmel_pwm->clk);
......@@ -358,6 +383,8 @@ static int atmel_pwm_probe(struct platform_device *pdev)
atmel_pwm->chip.npwm = 4;
atmel_pwm->chip.can_sleep = true;
atmel_pwm->config = data->config;
atmel_pwm->updated_pwms = 0;
mutex_init(&atmel_pwm->isr_lock);
ret = pwmchip_add(&atmel_pwm->chip);
if (ret < 0) {
......@@ -379,6 +406,7 @@ static int atmel_pwm_remove(struct platform_device *pdev)
struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev);
clk_unprepare(atmel_pwm->clk);
mutex_destroy(&atmel_pwm->isr_lock);
return pwmchip_remove(&atmel_pwm->chip);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment