Commit 475dc86d authored by Dinh Nguyen's avatar Dinh Nguyen

arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC

The Arria 10 is latest SOC+FPGA from the Altera SOCFPGA platform. The Arria10
SOC shares some similarities with the SOCFPGA Cyclone5 and Arria5, but there
are enough differences to warrant a new base dtsi.

The differences are:
* 3 EMAC controllers
* 5 I2C controllers
* 3 SPI controllers
* 1.5 GHZ dual A9s
* Support for DDR4

Besides the usual memory map and IRQ changes, the clock framework will be
different, so this patch just adds the fixed-clocks.
Signed-off-by: default avatarThor Thayer <tthayer@opensource.altera.com>
Signed-off-by: default avatarDinh Nguyen <dinguyen@opensource.altera.com>
parent c1ad85d7
......@@ -397,6 +397,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
r8a7779-marzen.dtb \
r8a7794-alt.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
......
/*
* Copyright Altera Corporation (C) 2014. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &gmac0;
ethernet1 = &gmac1;
ethernet2 = &gmac2;
serial0 = &uart0;
serial1 = &uart1;
timer0 = &timer0;
timer1 = &timer1;
timer2 = &timer2;
timer3 = &timer3;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
};
};
intc: intc@ffffd000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0xffffd000 0x1000>,
<0xffffc100 0x100>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
device_type = "soc";
interrupt-parent = <&intc>;
ranges;
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
pdma: pdma@ffda1000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xffda1000 0x1000>;
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>,
<0 84 IRQ_TYPE_LEVEL_HIGH>,
<0 85 IRQ_TYPE_LEVEL_HIGH>,
<0 86 IRQ_TYPE_LEVEL_HIGH>,
<0 87 IRQ_TYPE_LEVEL_HIGH>,
<0 88 IRQ_TYPE_LEVEL_HIGH>,
<0 89 IRQ_TYPE_LEVEL_HIGH>,
<0 90 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
};
clkmgr@ffd04000 {
compatible = "altr,clk-mgr";
reg = <0xffd04000 0x1000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
osc1: osc1 {
#clock-cells = <0>;
compatible = "fixed-clock";
};
main_pll: main_pll {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
clocks = <&osc1>;
};
periph_pll: periph_pll {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
clocks = <&osc1>;
};
};
};
gmac0: ethernet@ff800000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
reg = <0xff800000 0x2000>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
/* Filled in by bootloader */
mac-address = [00 00 00 00 00 00];
status = "disabled";
};
gmac1: ethernet@ff802000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
reg = <0xff802000 0x2000>;
interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
/* Filled in by bootloader */
mac-address = [00 00 00 00 00 00];
status = "disabled";
};
gmac2: ethernet@ff804000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
reg = <0xff804000 0x2000>;
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
/* Filled in by bootloader */
mac-address = [00 00 00 00 00 00];
status = "disabled";
};
gpio0: gpio@ffc02900 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc02900 0x100>;
status = "disabled";
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <29>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
};
};
gpio1: gpio@ffc02a00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc02a00 0x100>;
status = "disabled";
portb: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <29>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
};
};
gpio2: gpio@ffc02b00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc02b00 0x100>;
status = "disabled";
portc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <27>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
};
};
i2c0: i2c@ffc02200 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02200 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
i2c1: i2c@ffc02300 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02300 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
i2c2: i2c@ffc02400 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02400 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
i2c3: i2c@ffc02500 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02500 0x100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
i2c4: i2c@ffc02600 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02600 0x100>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
L2: l2-cache@fffff000 {
compatible = "arm,pl310-cache";
reg = <0xfffff000 0x1000>;
interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
};
mmc: dwmmc0@ff808000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "altr,socfpga-dw-mshc";
reg = <0xff808000 0x1000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
fifo-depth = <0x400>;
};
ocram: sram@ffe00000 {
compatible = "mmio-sram";
reg = <0xffe00000 0x40000>;
};
rst: rstmgr@ffd05000 {
#reset-cells = <1>;
compatible = "altr,rst-mgr";
reg = <0xffd05000 0x100>;
};
sysmgr: sysmgr@ffd06000 {
compatible = "altr,sys-mgr", "syscon";
reg = <0xffd06000 0x300>;
};
/* Local timer */
timer@ffffc600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xffffc600 0x100>;
interrupts = <1 13 0xf04>;
};
timer0: timer0@ffc02700 {
compatible = "snps,dw-apb-timer";
interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffc02700 0x100>;
};
timer1: timer1@ffc02800 {
compatible = "snps,dw-apb-timer";
interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffc02800 0x100>;
};
timer2: timer2@ffd00000 {
compatible = "snps,dw-apb-timer";
interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd00000 0x100>;
};
timer3: timer3@ffd00100 {
compatible = "snps,dw-apb-timer";
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd01000 0x100>;
};
uart0: serial0@ffc02000 {
compatible = "snps,dw-apb-uart";
reg = <0xffc02000 0x100>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart1: serial1@ffc02100 {
compatible = "snps,dw-apb-uart";
reg = <0xffc02100 0x100>;
interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
};
usbphy0: usbphy@0 {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
status = "okay";
};
usb0: usb@ffb00000 {
compatible = "snps,dwc2";
reg = <0xffb00000 0xffff>;
interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
};
usb1: usb@ffb40000 {
compatible = "snps,dwc2";
reg = <0xffb40000 0xffff>;
interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
};
watchdog0: watchdog@ffd00200 {
compatible = "snps,dw-wdt";
reg = <0xffd00200 0x100>;
interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
watchdog1: watchdog@ffd00300 {
compatible = "snps,dw-wdt";
reg = <0xffd00300 0x100>;
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
};
/*
* Copyright (C) 2014 Altera Corporation <www.altera.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/dts-v1/;
#include "socfpga_arria10.dtsi"
/ {
model = "Altera SOCFPGA Arria 10";
compatible = "altr,socfpga-arria10", "altr,socfpga";
chosen {
bootargs = "console=ttyS0,115200 rootwait";
};
memory {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
};
soc {
clkmgr@ffd04000 {
clocks {
osc1 {
clock-frequency = <25000000>;
};
};
};
serial0@ffc02000 {
status = "okay";
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment