V4L/DVB (11635): gspca - m5602-ov7660: Initial checkin of sensor skeleton code

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/gspca/m5602/Makefile

@@ -2,6 +2,7 @@ obj-$(CONFIG_USB_M5602) += gspca_m5602.o
 
 gspca_m5602-objs := m5602_core.o \
 		    m5602_ov9650.o \
+		    m5602_ov7660.o \
 		    m5602_mt9m111.o \
 		    m5602_po1030.o \
 		    m5602_s5k83a.o \

drivers/media/video/gspca/m5602/m5602_ov7660.c

+/*
+ * Driver for the ov7660 sensor
+ *
+ * Copyright (C) 2009 Erik Andrén
+ * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project.
+ * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br>
+ *
+ * Portions of code to USB interface and ALi driver software,
+ * Copyright (c) 2006 Willem Duinker
+ * v4l2 interface modeled after the V4L2 driver
+ * for SN9C10x PC Camera Controllers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include "m5602_ov7660.h"
+
+const static struct ctrl ov7660_ctrls[] = {};
+
+static struct v4l2_pix_format ov7660_modes[] = {
+	{
+		640,
+		480,
+		V4L2_PIX_FMT_SBGGR8,
+		V4L2_FIELD_NONE,
+		.sizeimage =
+			640 * 480,
+		.bytesperline = 640,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0
+	}
+};
+
+static void ov7660_dump_registers(struct sd *sd);
+
+int ov7660_probe(struct sd *sd)
+{
+	return -ENODEV;
+}
+
+int ov7660_init(struct sd *sd)
+{
+	return 0;
+}
+
+int ov7660_start(struct sd *sd)
+{
+	return 0;
+}
+
+int ov7660_stop(struct sd *sd)
+{
+	return 0;
+}
+
+void ov7660_disconnect(struct sd *sd) {}
+
+static void ov7660_dump_registers(struct sd *sd)
+{
+	int address;
+	info("Dumping the ov7660 register state");
+	for (address = 0; address < 0xa9; address++) {
+		u8 value;
+		m5602_read_sensor(sd, address, &value, 1);
+		info("register 0x%x contains 0x%x",
+		     address, value);
+	}
+
+	info("ov7660 register state dump complete");
+
+	info("Probing for which registers that are read/write");
+	for (address = 0; address < 0xff; address++) {
+		u8 old_value, ctrl_value;
+		u8 test_value[2] = {0xff, 0xff};
+
+		m5602_read_sensor(sd, address, &old_value, 1);
+		m5602_write_sensor(sd, address, test_value, 1);
+		m5602_read_sensor(sd, address, &ctrl_value, 1);
+
+		if (ctrl_value == test_value[0])
+			info("register 0x%x is writeable", address);
+		else
+			info("register 0x%x is read only", address);
+
+		/* Restore original value */
+		m5602_write_sensor(sd, address, &old_value, 1);
+	}
+}
+