selftests: forwarding: add a no_forwarding.sh test

Bombard a standalone switch port with various kinds of traffic to ensure
it is really standalone and doesn't leak packets to other switch ports.
Also check for switch ports in different bridges, and switch ports in a
VLAN-aware bridge but having different pvids. No forwarding should take
place in either case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tools/testing/selftests/net/forwarding/no_forwarding.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="standalone two_bridges one_bridge_two_pvids"
+NUM_NETIFS=4
+
+source lib.sh
+
+h1=${NETIFS[p1]}
+h2=${NETIFS[p3]}
+swp1=${NETIFS[p2]}
+swp2=${NETIFS[p4]}
+
+H1_IPV4="192.0.2.1"
+H2_IPV4="192.0.2.2"
+H1_IPV6="2001:db8:1::1"
+H2_IPV6="2001:db8:1::2"
+
+IPV4_ALLNODES="224.0.0.1"
+IPV6_ALLNODES="ff02::1"
+MACV4_ALLNODES="01:00:5e:00:00:01"
+MACV6_ALLNODES="33:33:00:00:00:01"
+NON_IP_MC="01:02:03:04:05:06"
+NON_IP_PKT="00:04 48:45:4c:4f"
+BC="ff:ff:ff:ff:ff:ff"
+
+# The full 4K VLAN space is too much to check, so strategically pick some
+# values which should provide reasonable coverage
+vids=(0 1 2 5 10 20 50 100 200 500 1000 1000 2000 4000 4094)
+
+send_non_ip()
+{
+	local if_name=$1
+	local smac=$2
+	local dmac=$3
+
+	$MZ -q $if_name "$dmac $smac $NON_IP_PKT"
+}
+
+send_uc_ipv4()
+{
+	local if_name=$1
+	local dmac=$2
+
+	ip neigh add $H2_IPV4 lladdr $dmac dev $if_name
+	ping_do $if_name $H2_IPV4
+	ip neigh del $H2_IPV4 dev $if_name
+}
+
+send_mc_ipv4()
+{
+	local if_name=$1
+
+	ping_do $if_name $IPV4_ALLNODES "-I $if_name"
+}
+
+send_uc_ipv6()
+{
+	local if_name=$1
+	local dmac=$2
+
+	ip -6 neigh add $H2_IPV6 lladdr $dmac dev $if_name
+	ping6_do $if_name $H2_IPV6
+	ip -6 neigh del $H2_IPV6 dev $if_name
+}
+
+send_mc_ipv6()
+{
+	local if_name=$1
+
+	ping6_do $if_name $IPV6_ALLNODES%$if_name
+}
+
+check_rcv()
+{
+	local if_name=$1
+	local type=$2
+	local pattern=$3
+	local should_fail=1
+
+	RET=0
+
+	tcpdump_show $if_name | grep -q "$pattern"
+
+	check_err_fail "$should_fail" "$?" "reception"
+
+	log_test "$type"
+}
+
+run_test()
+{
+	local test_name="$1"
+	local smac=$(mac_get $h1)
+	local dmac=$(mac_get $h2)
+	local h1_ipv6_lladdr=$(ipv6_lladdr_get $h1)
+	local vid=
+
+	echo "$test_name: Sending packets"
+
+	tcpdump_start $h2
+
+	send_non_ip $h1 $smac $dmac
+	send_non_ip $h1 $smac $NON_IP_MC
+	send_non_ip $h1 $smac $BC
+	send_uc_ipv4 $h1 $dmac
+	send_mc_ipv4 $h1
+	send_uc_ipv6 $h1 $dmac
+	send_mc_ipv6 $h1
+
+	for vid in "${vids[@]}"; do
+		vlan_create $h1 $vid
+		simple_if_init $h1.$vid $H1_IPV4/24 $H1_IPV6/64
+
+		send_non_ip $h1.$vid $smac $dmac
+		send_non_ip $h1.$vid $smac $NON_IP_MC
+		send_non_ip $h1.$vid $smac $BC
+		send_uc_ipv4 $h1.$vid $dmac
+		send_mc_ipv4 $h1.$vid
+		send_uc_ipv6 $h1.$vid $dmac
+		send_mc_ipv6 $h1.$vid
+
+		simple_if_fini $h1.$vid $H1_IPV4/24 $H1_IPV6/64
+		vlan_destroy $h1 $vid
+	done
+
+	sleep 1
+
+	echo "$test_name: Checking which packets were received"
+
+	tcpdump_stop $h2
+
+	check_rcv $h2 "$test_name: Unicast non-IP untagged" \
+		"$smac > $dmac, 802.3, length 4:"
+
+	check_rcv $h2 "$test_name: Multicast non-IP untagged" \
+		"$smac > $NON_IP_MC, 802.3, length 4:"
+
+	check_rcv $h2 "$test_name: Broadcast non-IP untagged" \
+		"$smac > $BC, 802.3, length 4:"
+
+	check_rcv $h2 "$test_name: Unicast IPv4 untagged" \
+		"$smac > $dmac, ethertype IPv4 (0x0800)"
+
+	check_rcv $h2 "$test_name: Multicast IPv4 untagged" \
+		"$smac > $MACV4_ALLNODES, ethertype IPv4 (0x0800).*: $H1_IPV4 > $IPV4_ALLNODES"
+
+	check_rcv $h2 "$test_name: Unicast IPv6 untagged" \
+		"$smac > $dmac, ethertype IPv6 (0x86dd).*8: $H1_IPV6 > $H2_IPV6"
+
+	check_rcv $h2 "$test_name: Multicast IPv6 untagged" \
+		"$smac > $MACV6_ALLNODES, ethertype IPv6 (0x86dd).*: $h1_ipv6_lladdr > $IPV6_ALLNODES"
+
+	for vid in "${vids[@]}"; do
+		check_rcv $h2 "$test_name: Unicast non-IP VID $vid" \
+			"$smac > $dmac, ethertype 802.1Q (0x8100).*vlan $vid,.*length 4"
+
+		check_rcv $h2 "$test_name: Multicast non-IP VID $vid" \
+			"$smac > $NON_IP_MC, ethertype 802.1Q (0x8100).*vlan $vid,.*length 4"
+
+		check_rcv $h2 "$test_name: Broadcast non-IP VID $vid" \
+			"$smac > $BC, ethertype 802.1Q (0x8100).*vlan $vid,.*length 4"
+
+		check_rcv $h2 "$test_name: Unicast IPv4 VID $vid" \
+			"$smac > $dmac, ethertype 802.1Q (0x8100).*vlan $vid,.*ethertype IPv4 (0x0800), $H1_IPV4 > $H2_IPV4"
+
+		check_rcv $h2 "$test_name: Multicast IPv4 VID $vid" \
+			"$smac > $MACV4_ALLNODES, ethertype 802.1Q (0x8100).*vlan $vid,.*ethertype IPv4 (0x0800), $H1_IPV4 > $IPV4_ALLNODES"
+
+		check_rcv $h2 "$test_name: Unicast IPv6 VID $vid" \
+			"$smac > $dmac, ethertype 802.1Q (0x8100).*vlan $vid,.*ethertype IPv6 (0x86dd), $H1_IPV6 > $H2_IPV6"
+
+		check_rcv $h2 "$test_name: Multicast IPv6 VID $vid" \
+			"$smac > $MACV6_ALLNODES, ethertype 802.1Q (0x8100).*vlan $vid,.*ethertype IPv6 (0x86dd), $h1_ipv6_lladdr > $IPV6_ALLNODES"
+	done
+
+	tcpdump_cleanup $h2
+}
+
+standalone()
+{
+	run_test "Standalone switch ports"
+}
+
+two_bridges()
+{
+	ip link add br0 type bridge && ip link set br0 up
+	ip link add br1 type bridge && ip link set br1 up
+	ip link set $swp1 master br0
+	ip link set $swp2 master br1
+
+	run_test "Switch ports in different bridges"
+
+	ip link del br1
+	ip link del br0
+}
+
+one_bridge_two_pvids()
+{
+	ip link add br0 type bridge vlan_filtering 1 vlan_default_pvid 0
+	ip link set br0 up
+	ip link set $swp1 master br0
+	ip link set $swp2 master br0
+
+	bridge vlan add dev $swp1 vid 1 pvid untagged
+	bridge vlan add dev $swp1 vid 2 pvid untagged
+
+	run_test "Switch ports in VLAN-aware bridge with different PVIDs"
+
+	ip link del br0
+}
+
+h1_create()
+{
+	simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+setup_prepare()
+{
+	vrf_prepare
+
+	h1_create
+	h2_create
+	# we call simple_if_init from the test itself, but setup_wait expects
+	# that we call it from here, and waits until the interfaces are up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS