Commit 476c1885 authored by Vlad Yasevich's avatar Vlad Yasevich Committed by David S. Miller

tg3: Work around HW/FW limitations with vlan encapsulated frames

TG3 appears to have an issue performing TSO and checksum offloading
correclty when the frame has been vlan encapsulated (non-accelrated).
In these cases, tcp checksum is not correctly updated.

This patch attempts to work around this issue.  After the patch,
802.1ad vlans start working correctly over tg3 devices.

CC: Prashant Sreedharan <prashant@broadcom.com>
CC: Michael Chan <mchan@broadcom.com>
Signed-off-by: default avatarVladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 07d92d5c
......@@ -7914,8 +7914,6 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
entry = tnapi->tx_prod;
base_flags = 0;
if (skb->ip_summed == CHECKSUM_PARTIAL)
base_flags |= TXD_FLAG_TCPUDP_CSUM;
mss = skb_shinfo(skb)->gso_size;
if (mss) {
......@@ -7929,6 +7927,13 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb) - ETH_HLEN;
/* HW/FW can not correctly segment packets that have been
* vlan encapsulated.
*/
if (skb->protocol == htons(ETH_P_8021Q) ||
skb->protocol == htons(ETH_P_8021AD))
return tg3_tso_bug(tp, tnapi, txq, skb);
if (!skb_is_gso_v6(skb)) {
if (unlikely((ETH_HLEN + hdr_len) > 80) &&
tg3_flag(tp, TSO_BUG))
......@@ -7979,6 +7984,17 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
base_flags |= tsflags << 12;
}
}
} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
/* HW/FW can not correctly checksum packets that have been
* vlan encapsulated.
*/
if (skb->protocol == htons(ETH_P_8021Q) ||
skb->protocol == htons(ETH_P_8021AD)) {
if (skb_checksum_help(skb))
goto drop;
} else {
base_flags |= TXD_FLAG_TCPUDP_CSUM;
}
}
if (tg3_flag(tp, USE_JUMBO_BDFLAG) &&
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment