arm64: dts: hisilicon: separate each group of data in the property "ranges"

Do not write the "ranges" of multiple groups of data into a uint32 array,
use <> to separate them. Otherwise, the errors similar to the following
will be reported:

soc: pcie@a0090000:ranges: [[33554432, 0, 2986344448, 0, 2986344448, 0, \
100597760, 16777216, 0, 0, 0, 3086942208, 0, 65536]] is not valid under \
any of the given schemas (Possible causes of the failure):
soc: pcie@a0090000:ranges: [[33554432, 0, 2986344448, 0, 2986344448, 0, \
100597760, 16777216, 0, 0, 0, 3086942208, 0, 65536]] is not of type 'boolean'
soc: pcie@a0090000:ranges:0: [33554432, 0, 2986344448, 0, 2986344448, 0, \
100597760, 16777216, 0, 0, 0, 3086942208, 0, 65536] is too long
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi

@@ -565,8 +565,8 @@ pcie: pcie@9860000 {
 			device_type = "pci";
 			bus-range = <0x00 0xff>;
 			num-lanes = <1>;
-			ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000
-				  0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
+			ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000>,
+				 <0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;

arch/arm64/boot/dts/hisilicon/hip06.dtsi

@@ -737,9 +737,8 @@ pcie0: pcie@a0090000 {
 			#size-cells = <2>;
 			device_type = "pci";
 			dma-coherent;
-			ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0
-				 0x5ff0000 0x01000000 0 0 0 0xb7ff0000
-				 0 0x10000>;
+			ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000>,
+				 <0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4

arch/arm64/boot/dts/hisilicon/hip07.dtsi

@@ -1708,8 +1708,8 @@ p0_pcie2_a: pcie@a00a0000 {
 			#size-cells = <2>;
 			device_type = "pci";
 			dma-coherent;
-			ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000
-				  0x01000000 0 0 0 0xaf7f0000 0 0x10000>;
+			ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000>,
+				 <0x01000000 0 0 0 0xaf7f0000 0 0x10000>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map = <0x0 0 0 1 &mbigen_pcie2_a 671 4