Merge tag 'usb-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are some small USB gadget bugfixes, and a few new USB device ids
  added to some drivers for the 3.5-rc5 release.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: CP210x Add 10 Device IDs
  USB: option: Add USB ID for Novatel Ovation MC551
  usb: phy: Fix Kconfig dependency for Phy drivers
  usb-storage: revert commit afff07e6 (Add 090c:1000 to unusal-devs)
  SCSI & usb-storage: add try_rc_10_first flag
  usb: musb: host: release dma channels if no active io
  usb: gadget: lpc32xx_udc: fix build error with debugfs enabled
  usb: otg: twl6030-usb: Fix twl writes
  USB: option: add id for Cellient MEN-200
  usb: dwc3: fix giveback of queued request in ep_dequeue
  usb: gadget: Complete fsl qe/udc driver conversion

drivers/scsi/sd.c

@@ -1899,6 +1899,8 @@ static int sd_try_rc16_first(struct scsi_device *sdp)
 {
 	if (sdp->host->max_cmd_len < 16)
 		return 0;
+	if (sdp->try_rc_10_first)
+		return 0;
 	if (sdp->scsi_level > SCSI_SPC_2)
 		return 1;
 	if (scsi_device_protection(sdp))

drivers/usb/Makefile

@@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
-obj-$(CONFIG_USB)		+= phy/
+obj-$(CONFIG_USB_COMMON)	+= phy/
 obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/

drivers/usb/dwc3/gadget.c

@@ -1091,7 +1091,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 		if (r == req) {
 			/* wait until it is processed */
 			dwc3_stop_active_transfer(dwc, dep->number);
-			goto out0;
+			goto out1;
 		}
 		dev_err(dwc->dev, "request %p was not queued to %s\n",
 				request, ep->name);
@@ -1099,6 +1099,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 		goto out0;
 	}
 
+out1:
 	/* giveback the request */
 	dwc3_gadget_giveback(dep, req, -ECONNRESET);
 

drivers/usb/gadget/fsl_qe_udc.h

@@ -153,10 +153,10 @@ struct usb_ep_para{
 #define USB_BUSMODE_DTB		0x02
 
 /* Endpoint basic handle */
-#define ep_index(EP)		((EP)->desc->bEndpointAddress & 0xF)
+#define ep_index(EP)		((EP)->ep.desc->bEndpointAddress & 0xF)
 #define ep_maxpacket(EP)	((EP)->ep.maxpacket)
 #define ep_is_in(EP)	((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
-			USB_DIR_IN) : ((EP)->desc->bEndpointAddress \
+			USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
 			& USB_DIR_IN) == USB_DIR_IN)
 
 /* ep0 transfer state */

drivers/usb/gadget/lpc32xx_udc.c

@@ -61,6 +61,7 @@
 #include <mach/irqs.h>
 #include <mach/board.h>
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
+#include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #endif
 

drivers/usb/musb/musb_host.c

@@ -375,11 +375,21 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
 	 */
 	if (list_empty(&qh->hep->urb_list)) {
 		struct list_head	*head;
+		struct dma_controller	*dma = musb->dma_controller;
 
-		if (is_in)
+		if (is_in) {
 			ep->rx_reinit = 1;
-		else
+			if (ep->rx_channel) {
+				dma->channel_release(ep->rx_channel);
+				ep->rx_channel = NULL;
+			}
+		} else {
 			ep->tx_reinit = 1;
+			if (ep->tx_channel) {
+				dma->channel_release(ep->tx_channel);
+				ep->tx_channel = NULL;
+			}
+		}
 
 		/* Clobber old pointers to this qh */
 		musb_ep_set_qh(ep, is_in, NULL);

drivers/usb/otg/twl6030-usb.c

@@ -305,9 +305,8 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 
 		regulator_enable(twl->usb3v3);
 		twl->asleep = 1;
-		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
-		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
-								0x10);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
 		status = USB_EVENT_ID;
 		otg->default_a = true;
 		twl->phy.state = OTG_STATE_A_IDLE;
@@ -316,12 +315,10 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 		atomic_notifier_call_chain(&twl->phy.notifier, status,
 							otg->gadget);
 	} else  {
-		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
-								0x10);
-		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
-								0x1);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
 	}
-	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+	twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
 
 	return IRQ_HANDLED;
 }
@@ -343,7 +340,7 @@ static int twl6030_enable_irq(struct usb_phy *x)
 {
 	struct twl6030_usb *twl = phy_to_twl(x);
 
-	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
 	twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
 	twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
 

drivers/usb/phy/Kconfig

@@ -2,11 +2,11 @@
 # Physical Layer USB driver configuration
 #
 comment "USB Physical Layer drivers"
-	depends on USB
+	depends on USB || USB_GADGET
 
 config USB_ISP1301
 	tristate "NXP ISP1301 USB transceiver support"
-	depends on USB
+	depends on USB || USB_GADGET
 	depends on I2C
 	help
 	  Say Y here to add support for the NXP ISP1301 USB transceiver driver.

drivers/usb/serial/cp210x.c

@@ -93,6 +93,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
 	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+	{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
 	{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
 	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
 	{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
@@ -134,7 +135,13 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
 	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
 	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+	{ USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
+	{ USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+	{ USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
+	{ USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
+	{ USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
+	{ USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 	{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
@@ -146,7 +153,11 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
 };

drivers/usb/serial/option.c

@@ -236,6 +236,7 @@ static void option_instat_callback(struct urb *urb);
 #define NOVATELWIRELESS_PRODUCT_G1		0xA001
 #define NOVATELWIRELESS_PRODUCT_G1_M		0xA002
 #define NOVATELWIRELESS_PRODUCT_G2		0xA010
+#define NOVATELWIRELESS_PRODUCT_MC551		0xB001
 
 /* AMOI PRODUCTS */
 #define AMOI_VENDOR_ID				0x1614
@@ -497,6 +498,10 @@ static void option_instat_callback(struct urb *urb);
 /* MediaTek products */
 #define MEDIATEK_VENDOR_ID			0x0e8d
 
+/* Cellient products */
+#define CELLIENT_VENDOR_ID			0x2692
+#define CELLIENT_PRODUCT_MEN200			0x9005
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -734,6 +739,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
+	/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
+	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
 
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -1233,6 +1240,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) },        /* MediaTek MT6276M modem & app port */
+	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

drivers/usb/storage/scsiglue.c

@@ -202,6 +202,12 @@ static int slave_configure(struct scsi_device *sdev)
 		if (us->fflags & US_FL_NO_READ_CAPACITY_16)
 			sdev->no_read_capacity_16 = 1;
 
+		/*
+		 * Many devices do not respond properly to READ_CAPACITY_16.
+		 * Tell the SCSI layer to try READ_CAPACITY_10 first.
+		 */
+		sdev->try_rc_10_first = 1;
+
 		/* assume SPC3 or latter devices support sense size > 18 */
 		if (sdev->scsi_level > SCSI_SPC_2)
 			us->fflags |= US_FL_SANE_SENSE;

drivers/usb/storage/unusual_devs.h

@@ -1107,13 +1107,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
 		USB_SC_RBC, USB_PR_BULK, NULL,
 		0 ),
 
-/* Feiya QDI U2 DISK, reported by Hans de Goede <hdegoede@redhat.com> */
-UNUSUAL_DEV( 0x090c, 0x1000, 0x0000, 0xffff,
-		"Feiya",
-		"QDI U2 DISK",
-		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_NO_READ_CAPACITY_16 ),
-
 /* aeb */
 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		"Feiya",

include/scsi/scsi_device.h

@@ -151,6 +151,7 @@ struct scsi_device {
 					   SD_LAST_BUGGY_SECTORS */
 	unsigned no_read_disc_info:1;	/* Avoid READ_DISC_INFO cmds */
 	unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
+	unsigned try_rc_10_first:1;	/* Try READ_CAPACACITY_10 first */
 	unsigned is_visible:1;	/* is the device visible in sysfs */
 
 	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */