wifi: rt2x00: add throughput LED trigger

This adds a (currently missing) throughput LED trigger for the rt2x00
driver. Previously, LED triggers had to be assigned to the netdev, which
was limited to a single VAP.
Tested-by: Christoph Krapp <achterin@googlemail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/73f5ba4134e621462a26186449400cf0c1ac1730.1663445157.git.daniel@makrotopia.org

drivers/net/wireless/ralink/rt2x00/rt2x00dev.c

@@ -1093,6 +1093,19 @@ static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
 	kfree(rt2x00dev->spec.channels_info);
 }
 
+static const struct ieee80211_tpt_blink rt2x00_tpt_blink[] = {
+	{ .throughput = 0 * 1024, .blink_time = 334 },
+	{ .throughput = 1 * 1024, .blink_time = 260 },
+	{ .throughput = 2 * 1024, .blink_time = 220 },
+	{ .throughput = 5 * 1024, .blink_time = 190 },
+	{ .throughput = 10 * 1024, .blink_time = 170 },
+	{ .throughput = 25 * 1024, .blink_time = 150 },
+	{ .throughput = 54 * 1024, .blink_time = 130 },
+	{ .throughput = 120 * 1024, .blink_time = 110 },
+	{ .throughput = 265 * 1024, .blink_time = 80 },
+	{ .throughput = 586 * 1024, .blink_time = 50 },
+};
+
 static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
@@ -1174,6 +1187,11 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 
 #undef RT2X00_TASKLET_INIT
 
+	ieee80211_create_tpt_led_trigger(rt2x00dev->hw,
+					 IEEE80211_TPT_LEDTRIG_FL_RADIO,
+					 rt2x00_tpt_blink,
+					 ARRAY_SIZE(rt2x00_tpt_blink));
+
 	/*
 	 * Register HW.
 	 */