Commit 47f4d887 authored by Luis R. Rodriguez's avatar Luis R. Rodriguez Committed by John W. Linville

mac80211: do not TX injected frames when not allowed

Monitor mode is able to TX by using injected frames. We should
not allow injected frames to be sent unless allowed by regulatory
rules. Since AP mode uses a monitor interfaces to transmit
management frames we have to take care to not break AP mode as
well while resolving this. We can deal with this by allowing compliant
APs solutions to inform mac80211 if their monitor interface is
intended to be used for an AP by setting a cfg80211 flag for the
monitor interface. hostapd, for example, currently does its own
checks to ensure AP mode is not used on channels which require radar
detection. Once such solutions are available it can can add this
flag for monitor interfaces.
Acked-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 7230645e
......@@ -1433,10 +1433,31 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_channel *chan = local->hw.conf.channel;
struct ieee80211_radiotap_header *prthdr =
(struct ieee80211_radiotap_header *)skb->data;
u16 len_rthdr;
/*
* Frame injection is not allowed if beaconing is not allowed
* or if we need radar detection. Beaconing is usually not allowed when
* the mode or operation (Adhoc, AP, Mesh) does not support DFS.
* Passive scan is also used in world regulatory domains where
* your country is not known and as such it should be treated as
* NO TX unless the channel is explicitly allowed in which case
* your current regulatory domain would not have the passive scan
* flag.
*
* Since AP mode uses monitor interfaces to inject/TX management
* frames we can make AP mode the exception to this rule once it
* supports radar detection as its implementation can deal with
* radar detection by itself. We can do that later by adding a
* monitor flag interfaces used for AP support.
*/
if ((chan->flags & (IEEE80211_CHAN_NO_IBSS | IEEE80211_CHAN_RADAR |
IEEE80211_CHAN_PASSIVE_SCAN)))
goto fail;
/* check for not even having the fixed radiotap header part */
if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header)))
goto fail; /* too short to be possibly valid */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment