dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'

In cases where we don't reference another schema, 'additionalProperties'
can be used instead. This is preferred for now as 'unevaluatedProperties'
support isn't implemented yet.

In a few cases, this means adding some missing property definitions of
which most are for SPI bus properties. 'unevaluatedProperties' is not going
to work for the SPI bus properties anyways as they are evaluated from the
parent node, not the SPI child node.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201005183830.486085-3-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml

@@ -134,7 +134,11 @@ properties:
   "#reset-cells":
     const: 1
 
-unevaluatedProperties: false
+  clocks: true
+
+  clock-names: true
+
+additionalProperties: false
 
 required:
   - compatible

Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml

@@ -101,7 +101,7 @@ properties:
   clock-names:
     const: ref_clk
 
-unevaluatedProperties: false
+additionalProperties: false
 
 required:
   - compatible

Documentation/devicetree/bindings/clock/imx8m-clock.yaml

@@ -96,7 +96,7 @@ allOf:
             - const: clk_ext3
             - const: clk_ext4
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   # Clock Control Module node:

Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml

@@ -79,7 +79,7 @@ properties:
       minimum: 0
       maximum: 7130
 
-unevaluatedProperties: false
+additionalProperties: false
 
 required:
   - compatible
@@ -99,7 +99,7 @@ examples:
 
       interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>;
 
-      baikal,pvt-temp-trim-millicelsius = <1000>;
+      baikal,pvt-temp-offset-millicelsius = <1000>;
 
       clocks = <&ccu_sys>, <&ccu_sys>;
       clock-names = "ref", "pclk";

Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml

@@ -25,12 +25,14 @@ properties:
   interrupts:
     maxItems: 1
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
   - interrupts
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml

@@ -32,6 +32,8 @@ properties:
 
   spi-cpol: true
 
+  spi-max-frequency: true
+
   interrupts:
     maxItems: 1
 
@@ -40,7 +42,7 @@ required:
   - reg
   - interrupts
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml

@@ -25,12 +25,14 @@ properties:
   interrupts:
     maxItems: 1
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
   - interrupts
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml

@@ -52,6 +52,8 @@ properties:
   avdd-supply:
     description: avdd supply can be used as reference for conversion.
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
@@ -108,7 +110,7 @@ patternProperties:
       - reg
       - diff-channels
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml

@@ -30,6 +30,8 @@ properties:
 
   spi-cpha: true
 
+  spi-max-frequency: true
+
   clocks:
     maxItems: 1
     description: phandle to the master clock (mclk)
@@ -92,7 +94,7 @@ required:
   - spi-cpol
   - spi-cpha
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml

@@ -30,6 +30,8 @@ properties:
 
   spi-cpha: true
 
+  spi-max-frequency: true
+
   '#address-cells':
     const: 1
 
@@ -63,7 +65,7 @@ patternProperties:
     required:
       - reg
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml

@@ -31,6 +31,10 @@ properties:
 
   spi-cpha: true
 
+  spi-cpol: true
+
+  spi-max-frequency: true
+
   avcc-supply: true
 
   interrupts:
@@ -102,7 +106,7 @@ required:
   - interrupts
   - adi,conversion-start-gpios
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml

@@ -43,11 +43,13 @@ properties:
   '#size-cells':
     const: 0
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml

@@ -39,13 +39,15 @@ properties:
       thus enabling power-down mode.
     maxItems: 1
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
   - vdd-supply
   - vref-supply
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml

@@ -49,6 +49,14 @@ properties:
       asserted during driver probe.
     maxItems: 1
 
+  spi-max-frequency: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
   channel@0:
     description: Represents an external channel which are
       connected to the DAC. Channel 0 can act both as a current
@@ -130,7 +138,7 @@ required:
   - channel@4
   - channel@5
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/frequency/adf4371.yaml

@@ -40,13 +40,15 @@ properties:
       output stage will shut down until the ADF4371/ADF4372 achieves lock as
       measured by the digital lock detect circuitry.
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
   - clocks
   - clock-names
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml

@@ -25,6 +25,8 @@ properties:
 
   spi-cpol: true
 
+  spi-max-frequency: true
+
   interrupts:
     maxItems: 1
 
@@ -33,7 +35,7 @@ required:
   - reg
   - interrupts
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml

@@ -116,7 +116,7 @@ allOf:
       dependencies:
         adi,sync-mode: [ clocks ]
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml

@@ -46,11 +46,13 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml

@@ -36,11 +36,13 @@ properties:
   drive-open-drain:
     type: boolean
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml

@@ -95,7 +95,7 @@ properties:
 
     additionalProperties: false
 
-unevaluatedProperties: false
+additionalProperties: false
 
 required:
   - compatible

Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml

@@ -130,6 +130,14 @@ properties:
     type: object
     $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
 
+  lochnagar-hwmon:
+    type: object
+    $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
+
+  lochnagar-sc:
+    type: object
+    $ref: /schemas/sound/cirrus,lochnagar.yaml#
+
   VDDCORE:
     description:
       Initialisation data for the VDDCORE regulator, which supplies the
@@ -249,7 +257,7 @@ required:
   - lochnagar-clk
   - lochnagar-pinctrl
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml

@@ -30,6 +30,9 @@ properties:
       - const: syscon
       - const: simple-mfd
 
+  reg:
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
@@ -54,7 +57,7 @@ required:
   - "#size-cells"
   - ranges
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml

@@ -28,11 +28,13 @@ properties:
     description: GPIO uspecifier of the CMD pin
     maxItems: 1
 
+  spi-cpha: true
+
 required:
   - compatible
   - cmd-gpios
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml

@@ -31,6 +31,8 @@ properties:
       Documentation/devicetree/bindings/nvmem/nvmem.txt and also
       examples below.
 
+  opp-shared: true
+
 required:
   - compatible
   - nvmem-cells
@@ -53,7 +55,7 @@ patternProperties:
 
     unevaluatedProperties: false
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml

@@ -47,7 +47,7 @@ properties:
 required:
   - compatible
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml

@@ -45,7 +45,7 @@ properties:
       frequency in HZ, but is defined only for the backwards compatibility
       with the picoxcell platform.
 
-unevaluatedProperties: false
+additionalProperties: false
 
 required:
   - compatible