Commit 48723543 authored by Michael Krufky's avatar Michael Krufky Committed by Mauro Carvalho Chehab

V4L/DVB (7893): xc5000: bug-fix: allow multiple devices in a single system

The current code passes a context pointer in the xc5000_config struct.
This context pointer is used in the tuner_callback function, used to
reset the device after firmware download.

The xc5000_config struct is a static structure, whose .priv member was
being assigned before calling xc5000_attach().  If there are more than
one of the same device type installed on a single system, the last one
to assign xc5000_config.priv will "win", and all others will cease to
function properly.

This patch passes the context pointer in xc5000_attach() rather that
storing it within the static struct xc5000_config.
Signed-off-by: default avatarMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 07c87a83
......@@ -212,7 +212,7 @@ static void xc5000_TunerReset(struct dvb_frontend *fe)
dprintk(1, "%s()\n", __func__);
if (priv->cfg->tuner_callback) {
ret = priv->cfg->tuner_callback(priv->cfg->priv,
ret = priv->cfg->tuner_callback(priv->devptr,
XC5000_TUNER_RESET, 0);
if (ret)
printk(KERN_ERR "xc5000: reset failed\n");
......@@ -900,9 +900,9 @@ static const struct dvb_tuner_ops xc5000_tuner_ops = {
.get_status = xc5000_get_status
};
struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c,
struct xc5000_config *cfg)
struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c,
struct xc5000_config *cfg, void *devptr)
{
struct xc5000_priv *priv = NULL;
u16 id = 0;
......@@ -916,6 +916,7 @@ struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe,
priv->cfg = cfg;
priv->bandwidth = BANDWIDTH_6_MHZ;
priv->i2c = i2c;
priv->devptr = devptr;
/* Check if firmware has been loaded. It is possible that another
instance of the driver has loaded the firmware.
......
......@@ -31,29 +31,31 @@ struct xc5000_config {
u8 i2c_address;
u32 if_khz;
/* For each bridge framework, when it attaches either analog or digital,
* it has to store a reference back to its _core equivalent structure,
* so that it can service the hardware by steering gpio's etc.
* Each bridge implementation is different so cast priv accordingly.
* The xc5000 driver cares not for this value, other than ensuring
* it's passed back to a bridge during tuner_callback().
*/
void *priv;
int (*tuner_callback) (void *priv, int command, int arg);
};
/* xc5000 callback command */
#define XC5000_TUNER_RESET 0
/* For each bridge framework, when it attaches either analog or digital,
* it has to store a reference back to its _core equivalent structure,
* so that it can service the hardware by steering gpio's etc.
* Each bridge implementation is different so cast devptr accordingly.
* The xc5000 driver cares not for this value, other than ensuring
* it's passed back to a bridge during tuner_callback().
*/
#if defined(CONFIG_MEDIA_TUNER_XC5000) || \
(defined(CONFIG_MEDIA_TUNER_XC5000_MODULE) && defined(MODULE))
extern struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c,
struct xc5000_config *cfg);
struct xc5000_config *cfg,
void *devptr);
#else
static inline struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c,
struct xc5000_config *cfg)
struct xc5000_config *cfg,
void *devptr)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return NULL;
......
......@@ -31,6 +31,8 @@ struct xc5000_priv {
u8 video_standard;
u8 rf_mode;
u8 fwloaded;
void *devptr;
};
#endif
......@@ -337,12 +337,10 @@ int au0828_dvb_register(struct au0828_dev *dev)
dvb->frontend = dvb_attach(au8522_attach,
&hauppauge_hvr950q_config,
&dev->i2c_adap);
if (dvb->frontend != NULL) {
hauppauge_hvr950q_tunerconfig.priv = dev;
if (dvb->frontend != NULL)
dvb_attach(xc5000_attach, dvb->frontend,
&dev->i2c_adap,
&hauppauge_hvr950q_tunerconfig);
}
&hauppauge_hvr950q_tunerconfig, dev);
break;
default:
printk(KERN_WARNING "The frontend of your DVB/ATSC card "
......
......@@ -384,12 +384,10 @@ static int dvb_register(struct cx23885_tsport *port)
port->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1500q_config,
&dev->i2c_bus[0].i2c_adap);
if (port->dvb.frontend != NULL) {
hauppauge_hvr1500q_tunerconfig.priv = i2c_bus;
if (port->dvb.frontend != NULL)
dvb_attach(xc5000_attach, port->dvb.frontend,
&i2c_bus->i2c_adap,
&hauppauge_hvr1500q_tunerconfig);
}
&hauppauge_hvr1500q_tunerconfig, i2c_bus);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1500:
i2c_bus = &dev->i2c_bus[1];
......
......@@ -816,11 +816,10 @@ static int dvb_register(struct cx8802_dev *dev)
/* tuner_config.video_dev must point to
* i2c_adap.algo_data
*/
pinnacle_pctv_hd_800i_tuner_config.priv =
core->i2c_adap.algo_data;
if (!dvb_attach(xc5000_attach, dev->dvb.frontend,
&core->i2c_adap,
&pinnacle_pctv_hd_800i_tuner_config))
&pinnacle_pctv_hd_800i_tuner_config,
core->i2c_adap.algo_data))
goto frontend_detach;
}
break;
......@@ -878,11 +877,10 @@ static int dvb_register(struct cx8802_dev *dev)
/* tuner_config.video_dev must point to
* i2c_adap.algo_data
*/
dvico_fusionhdtv7_tuner_config.priv =
core->i2c_adap.algo_data;
if (!dvb_attach(xc5000_attach, dev->dvb.frontend,
&core->i2c_adap,
&dvico_fusionhdtv7_tuner_config))
&dvico_fusionhdtv7_tuner_config,
core->i2c_adap.algo_data))
goto frontend_detach;
}
break;
......
......@@ -448,10 +448,10 @@ static void set_type(struct i2c_client *c, unsigned int type,
xc5000_cfg.i2c_address = t->i2c->addr;
xc5000_cfg.if_khz = 5380;
xc5000_cfg.priv = c->adapter->algo_data;
xc5000_cfg.tuner_callback = t->tuner_callback;
if (!dvb_attach(xc5000_attach,
&t->fe, t->i2c->adapter, &xc5000_cfg))
&t->fe, t->i2c->adapter, &xc5000_cfg,
c->adapter->algo_data))
goto attach_failed;
xc_tuner_ops = &t->fe.ops.tuner_ops;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment