wifi: rtw89: add retry to change power_mode state

When starting to send heavy traffic in low power mode,
driver will call multiple tx wake notify to wake firmware
within a short time. In this situation, firmware may miss
power mode change request from driver and leads to status
error. So we change driver to call power_mode_change at most
three times to make sure firmware could get the request.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220819064811.37700-2-pkshih@realtek.com

drivers/net/wireless/realtek/rtw89/mac.c

@@ -1054,18 +1054,29 @@ void rtw89_mac_power_mode_change(struct rtw89_dev *rtwdev, bool enter)
 	enum rtw89_rpwm_req_pwr_state state;
 	unsigned long delay = enter ? 10 : 150;
 	int ret;
+	int i;
 
 	if (enter)
 		state = rtw89_mac_get_req_pwr_state(rtwdev);
 	else
 		state = RTW89_MAC_RPWM_REQ_PWR_STATE_ACTIVE;
 
-	rtw89_mac_send_rpwm(rtwdev, state, false);
-	ret = read_poll_timeout_atomic(rtw89_mac_check_cpwm_state, ret, !ret,
-				       delay, 15000, false, rtwdev, state);
-	if (ret)
-		rtw89_err(rtwdev, "firmware failed to ack for %s ps mode\n",
-			  enter ? "entering" : "leaving");
+	for (i = 0; i < RPWM_TRY_CNT; i++) {
+		rtw89_mac_send_rpwm(rtwdev, state, false);
+		ret = read_poll_timeout_atomic(rtw89_mac_check_cpwm_state, ret,
+					       !ret, delay, 15000, false,
+					       rtwdev, state);
+		if (!ret)
+			break;
+
+		if (i == RPWM_TRY_CNT - 1)
+			rtw89_err(rtwdev, "firmware failed to ack for %s ps mode\n",
+				  enter ? "entering" : "leaving");
+		else
+			rtw89_debug(rtwdev, RTW89_DBG_UNEXP,
+				    "%d time firmware failed to ack for %s ps mode\n",
+				    i + 1, enter ? "entering" : "leaving");
+	}
 }
 
 void rtw89_mac_notify_wake(struct rtw89_dev *rtwdev)

drivers/net/wireless/realtek/rtw89/mac.h

@@ -11,6 +11,7 @@
 #define ADDR_CAM_ENT_SIZE  0x40
 #define BSSID_CAM_ENT_SIZE 0x08
 #define HFC_PAGE_UNIT 64
+#define RPWM_TRY_CNT 3
 
 enum rtw89_mac_hwmod_sel {
 	RTW89_DMAC_SEL = 0,