ARM: h1940: Implement mmc_power function

This patch implements h1940-specific set_power callback for
s3cmci driver, so card power can be disabled when card is not inserted
or before suspend. Without this patch PDA consumes power in suspend when
card is inserted.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

arch/arm/mach-s3c2410/include/mach/h1940-latch.h

@@ -35,7 +35,7 @@
 #define H1940_LATCH_AUDIO_POWER		H1940_LATCH_GPIO(9)
 #define H1940_LATCH_SM803_ENABLE	H1940_LATCH_GPIO(10)
 #define H1940_LATCH_LCD_P4		H1940_LATCH_GPIO(11)
-#define H1940_LATCH_CPUQ5		H1940_LATCH_GPIO(12)
+#define H1940_LATCH_SD_POWER		H1940_LATCH_GPIO(12)
 #define H1940_LATCH_BLUETOOTH_POWER	H1940_LATCH_GPIO(13)
 #define H1940_LATCH_LED_GREEN		H1940_LATCH_GPIO(14)
 #define H1940_LATCH_LED_FLASH		H1940_LATCH_GPIO(15)

arch/arm/mach-s3c2410/mach-h1940.c

@@ -112,8 +112,7 @@ static unsigned int latch_state = H1940_LATCH_BIT(H1940_LATCH_LCD_P4) |
 	H1940_LATCH_BIT(H1940_LATCH_LCD_P1)			|
 	H1940_LATCH_BIT(H1940_LATCH_LCD_P2)			|
 	H1940_LATCH_BIT(H1940_LATCH_LCD_P3)			|
-	H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN)   |
-	H1940_LATCH_BIT(H1940_LATCH_CPUQ5);
+	H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN);
 
 static void h1940_latch_control(unsigned int clear, unsigned int set)
 {
@@ -247,10 +246,25 @@ static struct platform_device h1940_device_bluetooth = {
 	.id               = -1,
 };
 
+static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+	switch (power_mode) {
+	case MMC_POWER_OFF:
+		gpio_set_value(H1940_LATCH_SD_POWER, 0);
+		break;
+	case MMC_POWER_UP:
+	case MMC_POWER_ON:
+		gpio_set_value(H1940_LATCH_SD_POWER, 1);
+		break;
+	default:
+		break;
+	};
+}
+
 static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
 	.gpio_detect   = S3C2410_GPF(5),
 	.gpio_wprotect = S3C2410_GPH(8),
-	.set_power     = NULL,
+	.set_power     = h1940_set_mmc_power,
 	.ocr_avail     = MMC_VDD_32_33,
 };
 
@@ -397,6 +411,9 @@ static void __init h1940_init(void)
 	gpio_request(H1940_LATCH_USB_DP, "USB pullup");
 	gpio_direction_output(H1940_LATCH_USB_DP, 0);
 
+	gpio_request(H1940_LATCH_SD_POWER, "SD power");
+	gpio_direction_output(H1940_LATCH_SD_POWER, 0);
+
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }