Commit 48fb1994 authored by Oleksij Rempel's avatar Oleksij Rempel Committed by David S. Miller

net: phy: micrel: add ksz9477_get_features()

KSZ8563R, which has same PHYID as KSZ9477 family, will change "EEE control
and capability 1" (Register 3.20) content depending on configuration of
"EEE advertisement 1" (Register 7.60). Changes on the 7.60 will affect
3.20 register.

So, instead of depending on register 3.20, driver should set supported_eee.

Proper supported_eee configuration is needed to make use of generic
PHY c45 set/get_eee functions provided by next patches.
Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 14e47d1f
......@@ -1392,6 +1392,26 @@ static int ksz9131_config_aneg(struct phy_device *phydev)
return genphy_config_aneg(phydev);
}
static int ksz9477_get_features(struct phy_device *phydev)
{
int ret;
ret = genphy_read_abilities(phydev);
if (ret)
return ret;
/* The "EEE control and capability 1" (Register 3.20) seems to be
* influenced by the "EEE advertisement 1" (Register 7.60). Changes
* on the 7.60 will affect 3.20. So, we need to construct our own list
* of caps.
* KSZ8563R should have 100BaseTX/Full only.
*/
linkmode_and(phydev->supported_eee, phydev->supported,
PHY_EEE_CAP1_FEATURES);
return 0;
}
#define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX BIT(6)
#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED BIT(4)
......@@ -4172,6 +4192,7 @@ static struct phy_driver ksphy_driver[] = {
.handle_interrupt = kszphy_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.get_features = ksz9477_get_features,
} };
module_phy_driver(ksphy_driver);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment