ARM: dts: imx6qp: correct IPU nodes

Reference them by handle and remove the changed clocks that are copied
from the downstream DT and are not part of the mainline binding.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6qp.dtsi

@@ -55,32 +55,6 @@ ocram3: sram@00960000 {
 			reg = <0x00960000 0x20000>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
-
-		ipu1: ipu@02400000 {
-			compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
-			clocks = <&clks IMX6QDL_CLK_IPU1>,
-				 <&clks IMX6QDL_CLK_IPU1_DI0>, <&clks IMX6QDL_CLK_IPU1_DI1>,
-				 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
-				 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
-				 <&clks IMX6QDL_CLK_PRG0_APB>;
-			clock-names = "bus",
-				      "di0", "di1",
-				      "di0_sel", "di1_sel",
-				      "ldb_di0", "ldb_di1", "prg";
-		};
-
-		ipu2: ipu@02800000 {
-			compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
-			clocks = <&clks IMX6QDL_CLK_IPU2>,
-				 <&clks IMX6QDL_CLK_IPU2_DI0>, <&clks IMX6QDL_CLK_IPU2_DI1>,
-				 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
-				 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
-				 <&clks IMX6QDL_CLK_PRG1_APB>;
-			clock-names = "bus",
-				      "di0", "di1",
-				      "di0_sel", "di1_sel",
-				      "ldb_di0", "ldb_di1", "prg";
-		};
 	};
 };
 
@@ -90,6 +64,14 @@ &fec {
 		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&ipu1 {
+	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+};
+
+&ipu2 {
+	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+};
+
 &ldb {
 	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
 		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,