Commit 491bdcfa authored by Joel Stanley's avatar Joel Stanley

ARM: dts: aspeed: Make G4 clocks fixed

We do not yet have a clk driver upstream. So that users can boot the
unmodified upstream kernel, add fixed-clock and clock-frequency
properties to all of the clocks.

The values are taken from the Palmetto system. This is the only upstream
dts. It also happens to match all of the systems seen so far.
Acked-by: default avatarCédric Le Goater <clg@kaod.org>
Acked-by: default avatarAndrew Jeffery <andrew@aj.id.au>
Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
parent 8b9102da
......@@ -18,15 +18,6 @@ cpu@0 {
};
};
clocks {
clk_clkin: clk_clkin {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <48000000>;
};
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -92,16 +83,48 @@ apb {
#size-cells = <1>;
ranges;
clk_hpll: clk_hpll@1e6e2070 {
#clock-cells = <0>;
compatible = "aspeed,g4-hpll-clock";
reg = <0x1e6e2070 0x4>;
clocks = <&clk_clkin>;
};
syscon: syscon@1e6e2000 {
compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
#size-cells = <0>;
clk_clkin: clk_clkin {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <48000000>;
};
clk_hpll: clk_hpll@70 {
#clock-cells = <0>;
compatible = "aspeed,g4-hpll-clock", "fixed-clock";
reg = <0x70>;
clocks = <&clk_clkin>;
clock-frequency = <384000000>;
};
clk_ahb: clk_ahb@70 {
#clock-cells = <0>;
compatible = "aspeed,g4-ahb-clock", "fixed-clock";
reg = <0x70>;
clocks = <&clk_hpll>;
clock-frequency = <192000000>;
};
clk_apb: clk_apb@08 {
#clock-cells = <0>;
compatible = "aspeed,g4-apb-clock", "fixed-clock";
reg = <0x08>;
clocks = <&clk_hpll>;
clock-frequency = <48000000>;
};
clk_uart: clk_uart@2c{
#clock-cells = <0>;
compatible = "aspeed,g4-uart-clock", "fixed-clock";
reg = <0x2c>;
clock-frequency = <24000000>;
};
pinctrl: pinctrl {
compatible = "aspeed,g4-pinctrl";
......@@ -849,19 +872,6 @@ pinctrl_wdtrst2_default: wdtrst2_default {
};
};
clk_apb: clk_apb@1e6e2008 {
#clock-cells = <0>;
compatible = "aspeed,g4-apb-clock";
reg = <0x1e6e2008 0x4>;
clocks = <&clk_hpll>;
};
clk_uart: clk_uart@1e6e2008 {
#clock-cells = <0>;
compatible = "aspeed,uart-clock";
reg = <0x1e6e202c 0x4>;
};
sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x8000>; // 32K
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment