Commit 491e7058 authored by Biju Das's avatar Biju Das Committed by Simon Horman

ARM: dts: r8a7744: Add MSIOF[012] support

Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi.
Signed-off-by: default avatarBiju Das <biju.das@bp.renesas.com>
Reviewed-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 0faadd5a
...@@ -1068,6 +1068,54 @@ pwm6: pwm@e6e36000 { ...@@ -1068,6 +1068,54 @@ pwm6: pwm@e6e36000 {
status = "disabled"; status = "disabled";
}; };
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7744",
"renesas,rcar-gen2-msiof";
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 000>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>,
<&dmac1 0x51>, <&dmac1 0x52>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
resets = <&cpg 000>;
status = "disabled";
};
msiof1: spi@e6e10000 {
compatible = "renesas,msiof-r8a7744",
"renesas,rcar-gen2-msiof";
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 208>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>,
<&dmac1 0x55>, <&dmac1 0x56>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
resets = <&cpg 208>;
status = "disabled";
};
msiof2: spi@e6e00000 {
compatible = "renesas,msiof-r8a7744",
"renesas,rcar-gen2-msiof";
reg = <0 0xe6e00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 205>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>,
<&dmac1 0x41>, <&dmac1 0x42>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
resets = <&cpg 205>;
status = "disabled";
};
can0: can@e6e80000 { can0: can@e6e80000 {
compatible = "renesas,can-r8a7744", compatible = "renesas,can-r8a7744",
"renesas,rcar-gen2-can"; "renesas,rcar-gen2-can";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment