Merge branch 'broadcom-iproc'

Arun Parameswaran says:

====================
Add support for Broadcom's iProc MDIO and Cygnus Ethernet PHY

This patchset adds support for the iProc MDIO interface and the
Broadcom Cygnus SoC's internal Ethernet PHY.

The internal Ethernet PHY(s) in the Cygnus SoC's are accessed
via the MDIO interface found in most of the iProc based chips.

The patch also consolidates the common API's used by the
Broadcom phys to a common library. Existing Broadcom phy
drivers have been modified to use the common library API's.

This patch series is based on Linux v4.3-rc1 and is avaliable in:
https://github.com/Broadcom/cygnus-linux/tree/cygnus-net-phy-mdio-v3

The Ethernet driver for the iProc family will be submitted soon,
as will the device tree configurations for the different iProc
family SoCs.

Changes from v2:
- Modified drivers/net/phy/Kconfig to modify the BCM_CYGNUS_PHY
  driver to 'depends on MDIO_BCM_IPROC' instead of 'select'.
- Added github branch to the cover letter

Changes from v1:
- Updated device tree documentation for the iProc MDIO driver
  based on Florian's feedback.
- Moved the core register defines from the Cygnus PHY driver to
  'include/linux/brcmphy.h' based on Florian's feedback.
- Created a new patch/commit to modify the bcm7xxx phy driver
  to use the new core register defines.
- Modified the Kconfig entry for the Broadcom PHY library to
  'tristate' instead of 'bool'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt

+* Broadcom iProc MDIO bus controller
+
+Required properties:
+- compatible: should be "brcm,iproc-mdio"
+- reg: address and length of the register set for the MDIO interface
+- #size-cells: must be 1
+- #address-cells: must be 0
+
+Child nodes of this MDIO bus controller node are standard Ethernet PHY device
+nodes as described in Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+
+mdio@18002000 {
+	compatible = "brcm,iproc-mdio";
+	reg = <0x18002000 0x8>;
+	#size-cells = <1>;
+	#address-cells = <0>;
+
+	enet-gphy@0 {
+		reg = <0>;
+	};
+};

drivers/net/phy/Kconfig

@@ -69,20 +69,39 @@ config SMSC_PHY
 	---help---
 	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
 
+config BCM_NET_PHYLIB
+	tristate
+
 config BROADCOM_PHY
 	tristate "Drivers for Broadcom PHYs"
+	select BCM_NET_PHYLIB
 	---help---
 	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
 	  BCM5481 and BCM5482 PHYs.
 
+config BCM_CYGNUS_PHY
+	tristate "Drivers for Broadcom Cygnus SoC internal PHY"
+	depends on ARCH_BCM_CYGNUS || COMPILE_TEST
+	depends on MDIO_BCM_IPROC
+	select BCM_NET_PHYLIB
+	---help---
+	  This PHY driver is for the 1G internal PHYs of the Broadcom
+	  Cygnus Family SoC.
+
+	  Currently supports internal PHY's used in the BCM11300,
+	  BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
+	  BCM58303 & BCM58305 Broadcom Cygnus SoCs.
+
 config BCM63XX_PHY
 	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
 	depends on BCM63XX
+	select BCM_NET_PHYLIB
 	---help---
 	  Currently supports the 6348 and 6358 PHYs.
 
 config BCM7XXX_PHY
 	tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
+	select BCM_NET_PHYLIB
 	---help---
 	  Currently supports the BCM7366, BCM7439, BCM7445, and
 	  40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
@@ -225,6 +244,15 @@ config MDIO_BCM_UNIMAC
 	  This hardware can be found in the Broadcom GENET Ethernet MAC
 	  controllers as well as some Broadcom Ethernet switches such as the
 	  Starfighter 2 switches.
+
+config MDIO_BCM_IPROC
+	tristate "Broadcom iProc MDIO bus controller"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on HAS_IOMEM && OF_MDIO
+	help
+	  This module provides a driver for the MDIO busses found in the
+	  Broadcom iProc SoC's.
+
 endif # PHYLIB
 
 config MICREL_KS8995MA

drivers/net/phy/Makefile

@@ -12,10 +12,12 @@ obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
 obj-$(CONFIG_SMSC_PHY)		+= smsc.o
 obj-$(CONFIG_TERANETICS_PHY)	+= teranetics.o
 obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
+obj-$(CONFIG_BCM_NET_PHYLIB)	+= bcm-phy-lib.o
 obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
 obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
 obj-$(CONFIG_BCM7XXX_PHY)	+= bcm7xxx.o
 obj-$(CONFIG_BCM87XX_PHY)	+= bcm87xx.o
+obj-$(CONFIG_BCM_CYGNUS_PHY)	+= bcm-cygnus.o
 obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
 obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
 obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
@@ -38,3 +40,4 @@ obj-$(CONFIG_MDIO_SUN4I)	+= mdio-sun4i.o
 obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o
 obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o
 obj-$(CONFIG_MICROCHIP_PHY)	+= microchip.o
+obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o

drivers/net/phy/bcm-cygnus.c

+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Broadcom Cygnus SoC internal transceivers support. */
+#include "bcm-phy-lib.h"
+#include <linux/brcmphy.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+/* Broadcom Cygnus Phy specific registers */
+#define MII_BCM_CYGNUS_AFE_VDAC_ICTRL_0  0x91E5 /* VDAL Control register */
+
+static int bcm_cygnus_afe_config(struct phy_device *phydev)
+{
+	int rc;
+
+	/* ensure smdspclk is enabled */
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, 0x0c30);
+	if (rc < 0)
+		return rc;
+
+	/* AFE_VDAC_ICTRL_0 bit 7:4 Iq=1100 for 1g 10bt, normal modes */
+	rc = bcm_phy_write_misc(phydev, 0x39, 0x01, 0xA7C8);
+	if (rc < 0)
+		return rc;
+
+	/* AFE_HPF_TRIM_OTHERS bit11=1, short cascode enable for all modes*/
+	rc = bcm_phy_write_misc(phydev, 0x3A, 0x00, 0x0803);
+	if (rc < 0)
+		return rc;
+
+	/* AFE_TX_CONFIG_1 bit 7:4 Iq=1100 for test modes */
+	rc = bcm_phy_write_misc(phydev, 0x3A, 0x01, 0xA740);
+	if (rc < 0)
+		return rc;
+
+	/* AFE TEMPSEN_OTHERS rcal_HT, rcal_LT 10000 */
+	rc = bcm_phy_write_misc(phydev, 0x3A, 0x03, 0x8400);
+	if (rc < 0)
+		return rc;
+
+	/* AFE_FUTURE_RSV bit 2:0 rccal <2:0>=100 */
+	rc = bcm_phy_write_misc(phydev, 0x3B, 0x00, 0x0004);
+	if (rc < 0)
+		return rc;
+
+	/* Adjust bias current trim to overcome digital offSet */
+	rc = phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x02);
+	if (rc < 0)
+		return rc;
+
+	/* make rcal=100, since rdb default is 000 */
+	rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB1, 0x10);
+	if (rc < 0)
+		return rc;
+
+	/* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */
+	rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x10);
+	if (rc < 0)
+		return rc;
+
+	/* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */
+	rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x00);
+
+	return 0;
+}
+
+static int bcm_cygnus_config_init(struct phy_device *phydev)
+{
+	int reg, rc;
+
+	reg = phy_read(phydev, MII_BCM54XX_ECR);
+	if (reg < 0)
+		return reg;
+
+	/* Mask interrupts globally. */
+	reg |= MII_BCM54XX_ECR_IM;
+	rc = phy_write(phydev, MII_BCM54XX_ECR, reg);
+	if (rc)
+		return rc;
+
+	/* Unmask events of interest */
+	reg = ~(MII_BCM54XX_INT_DUPLEX |
+		MII_BCM54XX_INT_SPEED |
+		MII_BCM54XX_INT_LINK);
+	rc = phy_write(phydev, MII_BCM54XX_IMR, reg);
+	if (rc)
+		return rc;
+
+	/* Apply AFE settings for the PHY */
+	rc = bcm_cygnus_afe_config(phydev);
+	if (rc)
+		return rc;
+
+	/* Advertise EEE */
+	rc = bcm_phy_enable_eee(phydev);
+	if (rc)
+		return rc;
+
+	/* Enable APD */
+	return bcm_phy_enable_apd(phydev, false);
+}
+
+static int bcm_cygnus_resume(struct phy_device *phydev)
+{
+	int rc;
+
+	genphy_resume(phydev);
+
+	/* Re-initialize the PHY to apply AFE work-arounds and
+	 * configurations when coming out of suspend.
+	 */
+	rc = bcm_cygnus_config_init(phydev);
+	if (rc)
+		return rc;
+
+	/* restart auto negotiation with the new settings */
+	return genphy_config_aneg(phydev);
+}
+
+static struct phy_driver bcm_cygnus_phy_driver[] = {
+{
+	.phy_id        = PHY_ID_BCM_CYGNUS,
+	.phy_id_mask   = 0xfffffff0,
+	.name          = "Broadcom Cygnus PHY",
+	.features      = PHY_GBIT_FEATURES |
+			SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+	.config_init   = bcm_cygnus_config_init,
+	.config_aneg   = genphy_config_aneg,
+	.read_status   = genphy_read_status,
+	.ack_interrupt = bcm_phy_ack_intr,
+	.config_intr   = bcm_phy_config_intr,
+	.suspend       = genphy_suspend,
+	.resume        = bcm_cygnus_resume,
+} };
+
+static struct mdio_device_id __maybe_unused bcm_cygnus_phy_tbl[] = {
+	{ PHY_ID_BCM_CYGNUS, 0xfffffff0, },
+	{ }
+};
+MODULE_DEVICE_TABLE(mdio, bcm_cygnus_phy_tbl);
+
+module_phy_driver(bcm_cygnus_phy_driver);
+
+MODULE_DESCRIPTION("Broadcom Cygnus internal PHY driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Broadcom Corporation");

drivers/net/phy/bcm-phy-lib.c

+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "bcm-phy-lib.h"
+#include <linux/brcmphy.h>
+#include <linux/export.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+
+#define MII_BCM_CHANNEL_WIDTH     0x2000
+#define BCM_CL45VEN_EEE_ADV       0x3c
+
+int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val)
+{
+	int rc;
+
+	rc = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+	if (rc < 0)
+		return rc;
+
+	return phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_exp);
+
+int bcm_phy_read_exp(struct phy_device *phydev, u16 reg)
+{
+	int val;
+
+	val = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+	if (val < 0)
+		return val;
+
+	val = phy_read(phydev, MII_BCM54XX_EXP_DATA);
+
+	/* Restore default value.  It's O.K. if this write fails. */
+	phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_exp);
+
+int bcm_phy_write_misc(struct phy_device *phydev,
+		       u16 reg, u16 chl, u16 val)
+{
+	int rc;
+	int tmp;
+
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL,
+		       MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	if (rc < 0)
+		return rc;
+
+	tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+	tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
+	if (rc < 0)
+		return rc;
+
+	tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg;
+	rc = bcm_phy_write_exp(phydev, tmp, val);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_misc);
+
+int bcm_phy_read_misc(struct phy_device *phydev,
+		      u16 reg, u16 chl)
+{
+	int rc;
+	int tmp;
+
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL,
+		       MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	if (rc < 0)
+		return rc;
+
+	tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+	tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
+	if (rc < 0)
+		return rc;
+
+	tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg;
+	rc = bcm_phy_read_exp(phydev, tmp);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_misc);
+
+int bcm_phy_ack_intr(struct phy_device *phydev)
+{
+	int reg;
+
+	/* Clear pending interrupts.  */
+	reg = phy_read(phydev, MII_BCM54XX_ISR);
+	if (reg < 0)
+		return reg;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_ack_intr);
+
+int bcm_phy_config_intr(struct phy_device *phydev)
+{
+	int reg;
+
+	reg = phy_read(phydev, MII_BCM54XX_ECR);
+	if (reg < 0)
+		return reg;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		reg &= ~MII_BCM54XX_ECR_IM;
+	else
+		reg |= MII_BCM54XX_ECR_IM;
+
+	return phy_write(phydev, MII_BCM54XX_ECR, reg);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_config_intr);
+
+int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow)
+{
+	phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
+	return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_shadow);
+
+int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
+			 u16 val)
+{
+	return phy_write(phydev, MII_BCM54XX_SHD,
+			 MII_BCM54XX_SHD_WRITE |
+			 MII_BCM54XX_SHD_VAL(shadow) |
+			 MII_BCM54XX_SHD_DATA(val));
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_shadow);
+
+int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down)
+{
+	int val;
+
+	if (dll_pwr_down) {
+		val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
+		if (val < 0)
+			return val;
+
+		val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
+	}
+
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD);
+	if (val < 0)
+		return val;
+
+	/* Clear APD bits */
+	val &= BCM_APD_CLR_MASK;
+
+	if (phydev->autoneg == AUTONEG_ENABLE)
+		val |= BCM54XX_SHD_APD_EN;
+	else
+		val |= BCM_NO_ANEG_APD_EN;
+
+	/* Enable energy detect single link pulse for easy wakeup */
+	val |= BCM_APD_SINGLELP_EN;
+
+	/* Enable Auto Power-Down (APD) for the PHY */
+	return bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_enable_apd);
+
+int bcm_phy_enable_eee(struct phy_device *phydev)
+{
+	int val;
+
+	/* Enable EEE at PHY level */
+	val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+				    MDIO_MMD_AN, phydev->addr);
+	if (val < 0)
+		return val;
+
+	val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
+
+	phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+			       MDIO_MMD_AN,  phydev->addr, (u32)val);
+
+	/* Advertise EEE */
+	val = phy_read_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
+				    MDIO_MMD_AN, phydev->addr);
+	if (val < 0)
+		return val;
+
+	val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+
+	phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
+			       MDIO_MMD_AN,  phydev->addr, (u32)val);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_enable_eee);

drivers/net/phy/bcm-phy-lib.h

+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _LINUX_BCM_PHY_LIB_H
+#define _LINUX_BCM_PHY_LIB_H
+
+#include <linux/phy.h>
+
+int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
+int bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
+
+int bcm_phy_write_misc(struct phy_device *phydev,
+		       u16 reg, u16 chl, u16 value);
+int bcm_phy_read_misc(struct phy_device *phydev,
+		      u16 reg, u16 chl);
+
+int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
+			 u16 val);
+int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow);
+
+int bcm_phy_ack_intr(struct phy_device *phydev);
+int bcm_phy_config_intr(struct phy_device *phydev);
+
+int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down);
+
+int bcm_phy_enable_eee(struct phy_device *phydev);
+#endif /* _LINUX_BCM_PHY_LIB_H */

drivers/net/phy/bcm63xx.c

@@ -6,6 +6,7 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  */
+#include "bcm-phy-lib.h"
 #include <linux/module.h>
 #include <linux/phy.h>
 
@@ -42,35 +43,6 @@ static int bcm63xx_config_init(struct phy_device *phydev)
 	return phy_write(phydev, MII_BCM63XX_IR, reg);
 }
 
-static int bcm63xx_ack_interrupt(struct phy_device *phydev)
-{
-	int reg;
-
-	/* Clear pending interrupts.  */
-	reg = phy_read(phydev, MII_BCM63XX_IR);
-	if (reg < 0)
-		return reg;
-
-	return 0;
-}
-
-static int bcm63xx_config_intr(struct phy_device *phydev)
-{
-	int reg, err;
-
-	reg = phy_read(phydev, MII_BCM63XX_IR);
-	if (reg < 0)
-		return reg;
-
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-		reg &= ~MII_BCM63XX_IR_GMASK;
-	else
-		reg |= MII_BCM63XX_IR_GMASK;
-
-	err = phy_write(phydev, MII_BCM63XX_IR, reg);
-	return err;
-}
-
 static struct phy_driver bcm63xx_driver[] = {
 {
 	.phy_id		= 0x00406000,
@@ -82,8 +54,8 @@ static struct phy_driver bcm63xx_driver[] = {
 	.config_init	= bcm63xx_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm63xx_ack_interrupt,
-	.config_intr	= bcm63xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 }, {
 	/* same phy as above, with just a different OUI */
@@ -95,8 +67,8 @@ static struct phy_driver bcm63xx_driver[] = {
 	.config_init	= bcm63xx_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm63xx_ack_interrupt,
-	.config_intr	= bcm63xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 } };
 

drivers/net/phy/bcm7xxx.c

@@ -12,12 +12,12 @@
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/delay.h>
+#include "bcm-phy-lib.h"
 #include <linux/bitops.h>
 #include <linux/brcmphy.h>
 #include <linux/mdio.h>
 
 /* Broadcom BCM7xxx internal PHY registers */
-#define MII_BCM7XXX_CHANNEL_WIDTH	0x2000
 
 /* 40nm only register definitions */
 #define MII_BCM7XXX_100TX_AUX_CTL	0x10
@@ -25,7 +25,6 @@
 #define MII_BCM7XXX_100TX_DISC		0x14
 #define MII_BCM7XXX_AUX_MODE		0x1d
 #define  MII_BCM7XX_64CLK_MDIO		BIT(12)
-#define MII_BCM7XXX_CORE_BASE1E		0x1e
 #define MII_BCM7XXX_TEST		0x1f
 #define  MII_BCM7XXX_SHD_MODE_2		BIT(2)
 
@@ -46,39 +45,13 @@
 #define AFE_VDAC_OTHERS_0		MISC_ADDR(0x39, 3)
 #define AFE_HPF_TRIM_OTHERS		MISC_ADDR(0x3a, 0)
 
-#define CORE_EXPB0			0xb0
-
-static void phy_write_exp(struct phy_device *phydev,
-					u16 reg, u16 value)
-{
-	phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg);
-	phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
-}
-
-static void phy_write_misc(struct phy_device *phydev,
-					u16 reg, u16 chl, u16 value)
-{
-	int tmp;
-
-	phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
-
-	tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
-	tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
-	phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
-
-	tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg;
-	phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp);
-
-	phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
-}
-
 static void r_rc_cal_reset(struct phy_device *phydev)
 {
 	/* Reset R_CAL/RC_CAL Engine */
-	phy_write_exp(phydev, 0x00b0, 0x0010);
+	bcm_phy_write_exp(phydev, 0x00b0, 0x0010);
 
 	/* Disable Reset R_AL/RC_CAL Engine */
-	phy_write_exp(phydev, 0x00b0, 0x0000);
+	bcm_phy_write_exp(phydev, 0x00b0, 0x0000);
 }
 
 static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
@@ -86,38 +59,38 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
 	/* Increase VCO range to prevent unlocking problem of PLL at low
 	 * temp
 	 */
-	phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
+	bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
 
 	/* Change Ki to 011 */
-	phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
+	bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
 
 	/* Disable loading of TVCO buffer to bandgap, set bandgap trim
 	 * to 111
 	 */
-	phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
+	bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
 
 	/* Adjust bias current trim by -3 */
-	phy_write_misc(phydev, DSP_TAP10, 0x690b);
+	bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
 
 	/* Switch to CORE_BASE1E */
-	phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
+	phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);
 
 	r_rc_cal_reset(phydev);
 
 	/* write AFE_RXCONFIG_0 */
-	phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
 
 	/* write AFE_RXCONFIG_1 */
-	phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
 
 	/* write AFE_RX_LP_COUNTER */
-	phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+	bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
 
 	/* write AFE_HPF_TRIM_OTHERS */
-	phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
+	bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
 
 	/* write AFTE_TX_CONFIG */
-	phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
+	bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
 
 	return 0;
 }
@@ -125,36 +98,36 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
 static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
 {
 	/* AFE_RXCONFIG_0 */
-	phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
 
 	/* AFE_RXCONFIG_1 */
-	phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
 
 	/* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */
-	phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
 
 	/* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */
-	phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+	bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
 
 	/* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */
-	phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
+	bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
 
 	/* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
-	phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+	bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
 
 	/* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */
-	phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
+	bcm_phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
 
 	/* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
 	 * offset for HT=0 code
 	 */
-	phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+	bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
 
 	/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
-	phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+	phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010);
 
 	/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
-	phy_write_misc(phydev, DSP_TAP10, 0x011b);
+	bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
 
 	/* Reset R_CAL/RC_CAL engine */
 	r_rc_cal_reset(phydev);
@@ -165,24 +138,24 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
 static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
 {
 	/* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */
-	phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
 
 	/* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */
-	phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
+	bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
 
 	/* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
-	phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+	bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
 
 	/* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
 	 * offset for HT=0 code
 	 */
-	phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+	bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
 
 	/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
-	phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+	phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010);
 
 	/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
-	phy_write_misc(phydev, DSP_TAP10, 0x011b);
+	bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
 
 	/* Reset R_CAL/RC_CAL engine */
 	r_rc_cal_reset(phydev);
@@ -190,53 +163,6 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
 	return 0;
 }
 
-static int bcm7xxx_apd_enable(struct phy_device *phydev)
-{
-	int val;
-
-	/* Enable powering down of the DLL during auto-power down */
-	val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
-	if (val < 0)
-		return val;
-
-	val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
-	bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
-
-	/* Enable auto-power down */
-	val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
-	if (val < 0)
-		return val;
-
-	val |= BCM54XX_SHD_APD_EN;
-	return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
-}
-
-static int bcm7xxx_eee_enable(struct phy_device *phydev)
-{
-	int val;
-
-	val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
-				    MDIO_MMD_AN, phydev->addr);
-	if (val < 0)
-		return val;
-
-	/* Enable general EEE feature at the PHY level */
-	val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
-
-	phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
-			       MDIO_MMD_AN, phydev->addr, val);
-
-	/* Advertise supported modes */
-	val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
-				    MDIO_MMD_AN, phydev->addr);
-
-	val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
-	phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
-			       MDIO_MMD_AN, phydev->addr, val);
-
-	return 0;
-}
-
 static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 {
 	u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
@@ -273,11 +199,11 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	ret = bcm7xxx_eee_enable(phydev);
+	ret = bcm_phy_enable_eee(phydev);
 	if (ret)
 		return ret;
 
-	return bcm7xxx_apd_enable(phydev);
+	return bcm_phy_enable_apd(phydev, true);
 }
 
 static int bcm7xxx_28nm_resume(struct phy_device *phydev)

drivers/net/phy/mdio-bcm-iproc.c

+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#define IPROC_GPHY_MDCDIV    0x1a
+
+#define MII_CTRL_OFFSET      0x000
+
+#define MII_CTRL_DIV_SHIFT   0
+#define MII_CTRL_PRE_SHIFT   7
+#define MII_CTRL_BUSY_SHIFT  8
+
+#define MII_DATA_OFFSET      0x004
+#define MII_DATA_MASK        0xffff
+#define MII_DATA_TA_SHIFT    16
+#define MII_DATA_TA_VAL      2
+#define MII_DATA_RA_SHIFT    18
+#define MII_DATA_PA_SHIFT    23
+#define MII_DATA_OP_SHIFT    28
+#define MII_DATA_OP_WRITE    1
+#define MII_DATA_OP_READ     2
+#define MII_DATA_SB_SHIFT    30
+
+struct iproc_mdio_priv {
+	struct mii_bus *mii_bus;
+	void __iomem *base;
+};
+
+static inline int iproc_mdio_wait_for_idle(void __iomem *base)
+{
+	u32 val;
+	unsigned int timeout = 1000; /* loop for 1s */
+
+	do {
+		val = readl(base + MII_CTRL_OFFSET);
+		if ((val & BIT(MII_CTRL_BUSY_SHIFT)) == 0)
+			return 0;
+
+		usleep_range(1000, 2000);
+	} while (timeout--);
+
+	return -ETIMEDOUT;
+}
+
+static inline void iproc_mdio_config_clk(void __iomem *base)
+{
+	u32 val;
+
+	val = (IPROC_GPHY_MDCDIV << MII_CTRL_DIV_SHIFT) |
+		  BIT(MII_CTRL_PRE_SHIFT);
+	writel(val, base + MII_CTRL_OFFSET);
+}
+
+static int iproc_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+	struct iproc_mdio_priv *priv = bus->priv;
+	u32 cmd;
+	int rc;
+
+	rc = iproc_mdio_wait_for_idle(priv->base);
+	if (rc)
+		return rc;
+
+	iproc_mdio_config_clk(priv->base);
+
+	/* Prepare the read operation */
+	cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
+		(reg << MII_DATA_RA_SHIFT) |
+		(phy_id << MII_DATA_PA_SHIFT) |
+		BIT(MII_DATA_SB_SHIFT) |
+		(MII_DATA_OP_READ << MII_DATA_OP_SHIFT);
+
+	writel(cmd, priv->base + MII_DATA_OFFSET);
+
+	rc = iproc_mdio_wait_for_idle(priv->base);
+	if (rc)
+		return rc;
+
+	cmd = readl(priv->base + MII_DATA_OFFSET) & MII_DATA_MASK;
+
+	return cmd;
+}
+
+static int iproc_mdio_write(struct mii_bus *bus, int phy_id,
+			    int reg, u16 val)
+{
+	struct iproc_mdio_priv *priv = bus->priv;
+	u32 cmd;
+	int rc;
+
+	rc = iproc_mdio_wait_for_idle(priv->base);
+	if (rc)
+		return rc;
+
+	iproc_mdio_config_clk(priv->base);
+
+	/* Prepare the write operation */
+	cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
+		(reg << MII_DATA_RA_SHIFT) |
+		(phy_id << MII_DATA_PA_SHIFT) |
+		BIT(MII_DATA_SB_SHIFT) |
+		(MII_DATA_OP_WRITE << MII_DATA_OP_SHIFT) |
+		((u32)(val) & MII_DATA_MASK);
+
+	writel(cmd, priv->base + MII_DATA_OFFSET);
+
+	rc = iproc_mdio_wait_for_idle(priv->base);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+static int iproc_mdio_probe(struct platform_device *pdev)
+{
+	struct iproc_mdio_priv *priv;
+	struct mii_bus *bus;
+	struct resource *res;
+	int rc;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base)) {
+		dev_err(&pdev->dev, "failed to ioremap register\n");
+		return PTR_ERR(priv->base);
+	}
+
+	priv->mii_bus = mdiobus_alloc();
+	if (!priv->mii_bus) {
+		dev_err(&pdev->dev, "MDIO bus alloc failed\n");
+		return -ENOMEM;
+	}
+
+	bus = priv->mii_bus;
+	bus->priv = priv;
+	bus->name = "iProc MDIO bus";
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id);
+	bus->parent = &pdev->dev;
+	bus->read = iproc_mdio_read;
+	bus->write = iproc_mdio_write;
+
+	rc = of_mdiobus_register(bus, pdev->dev.of_node);
+	if (rc) {
+		dev_err(&pdev->dev, "MDIO bus registration failed\n");
+		goto err_iproc_mdio;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	dev_info(&pdev->dev, "Broadcom iProc MDIO bus at 0x%p\n", priv->base);
+
+	return 0;
+
+err_iproc_mdio:
+	mdiobus_free(bus);
+	return rc;
+}
+
+static int iproc_mdio_remove(struct platform_device *pdev)
+{
+	struct iproc_mdio_priv *priv = platform_get_drvdata(pdev);
+
+	mdiobus_unregister(priv->mii_bus);
+	mdiobus_free(priv->mii_bus);
+
+	return 0;
+}
+
+static const struct of_device_id iproc_mdio_of_match[] = {
+	{ .compatible = "brcm,iproc-mdio", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, iproc_mdio_of_match);
+
+static struct platform_driver iproc_mdio_driver = {
+	.driver = {
+		.name = "iproc-mdio",
+		.of_match_table = iproc_mdio_of_match,
+	},
+	.probe = iproc_mdio_probe,
+	.remove = iproc_mdio_remove,
+};
+
+module_platform_driver(iproc_mdio_driver);
+
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("Broadcom iProc MDIO bus controller");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:iproc-mdio");

include/linux/brcmphy.h

@@ -30,6 +30,8 @@
 #define PHY_ID_BCM7439_2		0xae025080
 #define PHY_ID_BCM7445			0x600d8510
 
+#define PHY_ID_BCM_CYGNUS		0xae025200
+
 #define PHY_BCM_OUI_MASK		0xfffffc00
 #define PHY_BCM_OUI_1			0x00206000
 #define PHY_BCM_OUI_2			0x0143bc00
@@ -138,7 +140,10 @@
 
 /* 01010: Auto Power-Down */
 #define BCM54XX_SHD_APD			0x0a
+#define  BCM_APD_CLR_MASK		0xFE9F /* clear bits 5, 6 & 8 */
 #define  BCM54XX_SHD_APD_EN		0x0020
+#define  BCM_NO_ANEG_APD_EN		0x0060 /* bits 5 & 6 */
+#define  BCM_APD_SINGLELP_EN	0x0100 /* Bit 8 */
 
 #define BCM5482_SHD_LEDS1	0x0d	/* 01101: LED Selector 1 */
 					/* LED3 / ~LINKSPD[2] selector */
@@ -209,27 +214,13 @@
 #define MII_BRCM_FET_SHDW_AUXSTAT2	0x1b	/* Auxiliary status 2 */
 #define MII_BRCM_FET_SHDW_AS2_APDE	0x0020	/* Auto power down enable */
 
-/*
- * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T
- * 0x1c shadow registers.
- */
-static inline int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow)
-{
-	phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
-	return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
-}
-
-static inline int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow,
-				       u16 val)
-{
-	return phy_write(phydev, MII_BCM54XX_SHD,
-			 MII_BCM54XX_SHD_WRITE |
-			 MII_BCM54XX_SHD_VAL(shadow) |
-			 MII_BCM54XX_SHD_DATA(val));
-}
-
 #define BRCM_CL45VEN_EEE_CONTROL	0x803d
 #define LPI_FEATURE_EN			0x8000
 #define LPI_FEATURE_EN_DIG1000X		0x4000
 
+/* Core register definitions*/
+#define MII_BRCM_CORE_BASE1E	0x1E
+#define MII_BRCM_CORE_EXPB0	0xB0
+#define MII_BRCM_CORE_EXPB1	0xB1
+
 #endif /* _LINUX_BRCMPHY_H */