ASoC: fsl_sai: Fix one bug for hardware limitation.

This is maybe one bug or a limitation of the hardware that the {T,R}CR2's
Synchronous Mode bits must be set as late as possible, or the SAI device
maybe hanged up, and there has not any explaination about this limitation
in the SAI Data Sheet.

And the {T,R}CR2's Synchronous Mode bits must be set at the same time whether
for Tx or Rx stream.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

sound/soc/fsl/fsl_sai.c

@@ -145,7 +145,6 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai,
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
 		val_cr4 |= FSL_SAI_CR4_FSE;
-		val_cr4 |= FSL_SAI_CR4_FSP;
 		break;
 	default:
 		return -EINVAL;
@@ -185,9 +184,6 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai,
 		return -EINVAL;
 	}
 
-	if (fsl_dir == FSL_FMT_RECEIVER)
-		val_cr2 |= FSL_SAI_CR2_SYNC;
-
 	sai_writel(sai, val_cr2, sai->base + reg_cr2);
 	sai_writel(sai, val_cr4, sai->base + reg_cr4);
 
@@ -253,6 +249,7 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 	val_cr5 |= FSL_SAI_CR5_WNW(word_width);
 	val_cr5 |= FSL_SAI_CR5_W0W(word_width);
 
+	val_cr5 &= ~FSL_SAI_CR5_FBT_MASK;
 	if (sai->big_endian_data)
 		val_cr5 |= FSL_SAI_CR5_FBT(word_width - 1);
 	else
@@ -272,7 +269,15 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
 		struct snd_soc_dai *cpu_dai)
 {
 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-	u32 tcsr, rcsr, val_cr3, reg_cr3;
+	u32 tcsr, rcsr, val_cr2, val_cr3, reg_cr3;
+
+	val_cr2 = sai_readl(sai, sai->base + FSL_SAI_TCR2);
+	val_cr2 &= ~FSL_SAI_CR2_SYNC;
+	sai_writel(sai, val_cr2, sai->base + FSL_SAI_TCR2);
+
+	val_cr2 = sai_readl(sai, sai->base + FSL_SAI_RCR2);
+	val_cr2 |= FSL_SAI_CR2_SYNC;
+	sai_writel(sai, val_cr2, sai->base + FSL_SAI_RCR2);
 
 	tcsr = sai_readl(sai, sai->base + FSL_SAI_TCSR);
 	rcsr = sai_readl(sai, sai->base + FSL_SAI_RCSR);