Merge bk://kernel.bkbits.net/davem/net-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Documentation/kernel-parameters.txt

@@ -226,15 +226,19 @@ running once the system is up.
 
 	atascsi=	[HW,SCSI] Atari SCSI
 
-	atkbd.extra=	[HW] Enable extra LEDs and keys on IBM RapidAccess, EzKey
-			and similar keyboards
+	atkbd.extra=	[HW] Enable extra LEDs and keys on IBM RapidAccess,
+			EzKey and similar keyboards
 
 	atkbd.reset=	[HW] Reset keyboard during initialization
 
 	atkbd.set=	[HW] Select keyboard code set 
 			Format: <int> (2 = AT (default) 3 = PS/2)
 
-	atkbd.scroll=	[HW] Enable scroll wheel on MS Office and similar keyboards
+	atkbd.scroll=	[HW] Enable scroll wheel on MS Office and similar
+			keyboards
+
+	atkbd.softraw=	[HW] Choose between synthetic and real raw mode
+			Format: <bool> (0 = real, 1 = synthetic (default))
 	
 	atkbd.softrepeat=
 			[HW] Use software keyboard repeat

arch/arm/kernel/entry-armv.S

@@ -26,28 +26,27 @@
 /*
  * Invalid mode handlers
  */
-__pabt_invalid:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
-		stmia	sp, {r0 - lr}			@ Save XXX r0 - lr
-		ldr	r4, .LCabt
-		mov	r1, #BAD_PREFETCH
+	.macro	inv_entry, sym, reason
+	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
+	stmia	sp, {r0 - lr}			@ Save XXX r0 - lr
+	ldr	r4, .LC\sym
+	mov	r1, #\reason
+	.endm
+
+__pabt_invalid:
+		inv_entry abt, BAD_PREFETCH
 		b	1f
 
-__dabt_invalid:	sub	sp, sp, #S_FRAME_SIZE
-		stmia	sp, {r0 - lr}			@ Save SVC r0 - lr [lr *should* be intact]
-		ldr	r4, .LCabt
-		mov	r1, #BAD_DATA
+__dabt_invalid:
+		inv_entry abt, BAD_DATA
 		b	1f
 
-__irq_invalid:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate space on stack for frame
-		stmfd	sp, {r0 - lr}			@ Save r0 - lr
-		ldr	r4, .LCirq
-		mov	r1, #BAD_IRQ
+__irq_invalid:
+		inv_entry irq, BAD_IRQ
 		b	1f
 
-__und_invalid:	sub	sp, sp, #S_FRAME_SIZE
-		stmia	sp, {r0 - lr}
-		ldr	r4, .LCund
-		mov	r1, #BAD_UNDEFINSTR		@ int reason
+__und_invalid:
+		inv_entry und, BAD_UNDEFINSTR
 
 1:		zero_fp
 		ldmia	r4, {r5 - r7}			@ Get XXX pc, cpsr, old_r0
@@ -60,15 +59,20 @@ __und_invalid:	sub	sp, sp, #S_FRAME_SIZE
 /*
  * SVC mode handlers
  */
+	.macro	svc_entry, sym
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ save r0 - r12
+	ldr	r2, .LC\sym
+	add	r0, sp, #S_FRAME_SIZE
+	ldmia	r2, {r2 - r4}			@ get pc, cpsr
+	add	r5, sp, #S_SP
+	mov	r1, lr
+	stmia	r5, {r0 - r4}			@ save sp_SVC, lr_SVC, pc, cpsr, old_ro
+	.endm
+
 		.align	5
-__dabt_svc:	sub	sp, sp, #S_FRAME_SIZE
-		stmia	sp, {r0 - r12}			@ save r0 - r12
-		ldr	r2, .LCabt
-		add	r0, sp, #S_FRAME_SIZE
-		ldmia	r2, {r2 - r4}			@ get pc, cpsr
-		add	r5, sp, #S_SP
-		mov	r1, lr
-		stmia	r5, {r0 - r4}			@ save sp_SVC, lr_SVC, pc, cpsr, old_ro
+__dabt_svc:
+		svc_entry abt
 		mrs	r9, cpsr			@ Enable interrupts if they were
 		tst	r3, #PSR_I_BIT
 		biceq	r9, r9, #PSR_I_BIT		@ previously
@@ -91,14 +95,8 @@ __dabt_svc:	sub	sp, sp, #S_FRAME_SIZE
 		ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 
 		.align	5
-__irq_svc:	sub	sp, sp, #S_FRAME_SIZE
-		stmia	sp, {r0 - r12}			@ save r0 - r12
-		ldr	r7, .LCirq
-		add	r5, sp, #S_FRAME_SIZE
-		ldmia	r7, {r7 - r9}
-		add	r4, sp, #S_SP
-		mov	r6, lr
-		stmia	r4, {r5, r6, r7, r8, r9}	@ save sp_SVC, lr_SVC, pc, cpsr, old_ro
+__irq_svc:
+		svc_entry irq
 #ifdef CONFIG_PREEMPT
 		get_thread_info r8
 		ldr	r9, [r8, #TI_PREEMPT]		@ get preempt count
@@ -148,16 +146,10 @@ svc_preempt:	teq	r9, #0				@ was preempt count = 0
 #endif
 
 		.align	5
-__und_svc:	sub	sp, sp, #S_FRAME_SIZE
-		stmia	sp, {r0 - r12}			@ save r0 - r12
-		ldr	r3, .LCund
-		mov	r4, lr
-		ldmia	r3, {r5 - r7}
-		add	r3, sp, #S_FRAME_SIZE
-		add	r2, sp, #S_SP
-		stmia	r2, {r3 - r7}			@ save sp_SVC, lr_SVC, pc, cpsr, old_ro
-
-		ldr	r0, [r5, #-4]			@ r0 = instruction
+__und_svc:
+		svc_entry und
+
+		ldr	r0, [r2, #-4]			@ r0 = instruction
 		adrsvc	al, r9, 1f			@ r9 = normal FP return
 		bl	call_fpe			@ lr = undefined instr return
 
@@ -170,14 +162,8 @@ __und_svc:	sub	sp, sp, #S_FRAME_SIZE
 		ldmia	sp, {r0 - pc}^			@ Restore SVC registers
 
 		.align	5
-__pabt_svc:	sub	sp, sp, #S_FRAME_SIZE
-		stmia	sp, {r0 - r12}			@ save r0 - r12
-		ldr	r2, .LCabt
-		add	r0, sp, #S_FRAME_SIZE
-		ldmia	r2, {r2 - r4}			@ get pc, cpsr
-		add	r5, sp, #S_SP
-		mov	r1, lr
-		stmia	r5, {r0 - r4}			@ save sp_SVC, lr_SVC, pc, cpsr, old_ro
+__pabt_svc:
+		svc_entry abt
 		mrs	r9, cpsr			@ Enable interrupts if they were
 		tst	r3, #PSR_I_BIT
 		biceq	r9, r9, #PSR_I_BIT		@ previously
@@ -205,15 +191,20 @@ __pabt_svc:	sub	sp, sp, #S_FRAME_SIZE
 /*
  * User mode handlers
  */
+	.macro	usr_entry, sym
+	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
+	stmia	sp, {r0 - r12}			@ save r0 - r12
+	ldr	r7, .LC\sym
+	add	r5, sp, #S_PC
+	ldmia	r7, {r2 - r4}			@ Get USR pc, cpsr
+	stmia	r5, {r2 - r4}			@ Save USR pc, cpsr, old_r0
+	stmdb	r5, {sp, lr}^
+	.endm
+
 		.align	5
-__dabt_usr:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
-		stmia	sp, {r0 - r12}			@ save r0 - r12
-		ldr	r7, .LCabt
-		add	r5, sp, #S_PC
-		ldmia	r7, {r2 - r4}			@ Get USR pc, cpsr
-		stmia	r5, {r2 - r4}			@ Save USR pc, cpsr, old_r0
-		stmdb	r5, {sp, lr}^
-		alignment_trap r7, r7, __temp_abt
+__dabt_usr:
+		usr_entry abt
+		alignment_trap r7, r0, __temp_abt
 		zero_fp
 #ifdef MULTI_ABORT
 		ldr	r4, .LCprocfns			@ pass r2, r3 to
@@ -228,14 +219,9 @@ __dabt_usr:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
 		b	do_DataAbort
 
 		.align	5
-__irq_usr:	sub	sp, sp, #S_FRAME_SIZE
-		stmia	sp, {r0 - r12}			@ save r0 - r12
-		ldr	r4, .LCirq
-		add	r8, sp, #S_PC
-		ldmia	r4, {r5 - r7}			@ get saved PC, SPSR
-		stmia	r8, {r5 - r7}			@ save pc, psr, old_r0
-		stmdb	r8, {sp, lr}^
-		alignment_trap r4, r7, __temp_irq
+__irq_usr:
+		usr_entry irq
+		alignment_trap r7, r0, __temp_irq
 		zero_fp
 #ifdef CONFIG_PREEMPT
 		get_thread_info r8
@@ -265,18 +251,13 @@ __irq_usr:	sub	sp, sp, #S_FRAME_SIZE
 		.ltorg
 
 		.align	5
-__und_usr:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
-		stmia	sp, {r0 - r12}			@ Save r0 - r12
-		ldr	r4, .LCund
-		add	r8, sp, #S_PC
-		ldmia	r4, {r5 - r7}
-		stmia	r8, {r5 - r7}			@ Save USR pc, cpsr, old_r0
-		stmdb	r8, {sp, lr}^			@ Save user sp, lr
-		alignment_trap r4, r7, __temp_und
+__und_usr:
+		usr_entry und
+		alignment_trap r7, r0, __temp_und
 		zero_fp
-		tst	r6, #PSR_T_BIT			@ Thumb mode?
+		tst	r3, #PSR_T_BIT			@ Thumb mode?
 		bne	fpundefinstr			@ ignore FP
-		sub	r4, r5, #4
+		sub	r4, r2, #4
 1:		ldrt	r0, [r4]			@ r0  = instruction
 		adrsvc	al, r9, ret_from_exception	@ r9  = normal FP return
 		adrsvc	al, lr, fpundefinstr		@ lr  = undefined instr return
@@ -375,14 +356,9 @@ fpundefinstr:	mov	r0, sp
 		b	do_undefinstr
 
 		.align	5
-__pabt_usr:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
-		stmia	sp, {r0 - r12}			@ Save r0 - r12
-		ldr	r4, .LCabt
-		add	r8, sp, #S_PC
-		ldmia	r4, {r5 - r7}			@ Get USR pc, cpsr
-		stmia	r8, {r5 - r7}			@ Save USR pc, cpsr, old_r0
-		stmdb	r8, {sp, lr}^			@ Save sp_usr lr_usr
-		alignment_trap r4, r7, __temp_abt
+__pabt_usr:
+		usr_entry abt
+		alignment_trap r7, r0, __temp_abt
 		zero_fp
 		enable_irq r0				@ Enable interrupts
 		mov	r0, r5				@ address (pc)

arch/x86_64/mm/numa.c

@@ -28,7 +28,6 @@ bootmem_data_t plat_node_bdata[MAX_NUMNODES];
 int memnode_shift;
 u8  memnodemap[NODEMAPSIZE];
 
-#define NUMA_NO_NODE 0xff
 unsigned char cpu_to_node[NR_CPUS] = { [0 ... NR_CPUS-1] = NUMA_NO_NODE };
 cpumask_t     node_to_cpumask[MAX_NUMNODES];
 

arch/x86_64/mm/pageattr.c

@@ -65,7 +65,10 @@ static void flush_kernel_map(void *address)
 			asm volatile("clflush (%0)" :: "r" (address + i)); 
 	} else
 		asm volatile("wbinvd":::"memory"); 
-	__flush_tlb_one(address);
+	if (address)
+		__flush_tlb_one(address);
+	else
+		__flush_tlb_all();
 }
 
 
@@ -217,6 +220,8 @@ void global_flush_tlb(void)
 	down_read(&init_mm.mmap_sem);
 	df = xchg(&df_list, NULL);
 	up_read(&init_mm.mmap_sem);
+	if (!df)
+		return;
 	flush_map((df && !df->next) ? df->address : 0);
 	for (; df; df = next_df) { 
 		next_df = df->next;

arch/x86_64/mm/srat.c

@@ -177,10 +177,18 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 		if (!node_isset(i, nodes_parsed))
 			continue;
 		cutoff_node(i, start, end);
-		if (nodes[i].start == nodes[i].end)
+		if (nodes[i].start == nodes[i].end) { 
+			node_clear(i, nodes_parsed);
 			continue;
+		}
 		setup_node_bootmem(i, nodes[i].start, nodes[i].end);
 	}
+	for (i = 0; i < NR_CPUS; i++) { 
+		if (cpu_to_node[i] == NUMA_NO_NODE)
+			continue;
+		if (!node_isset(cpu_to_node[i], nodes_parsed))
+			cpu_to_node[i] = NUMA_NO_NODE; 
+	}
 	numa_init_array();
 	return 0;
 }

drivers/block/cfq-iosched.c

@@ -1285,19 +1285,19 @@ static int cfq_queue_empty(request_queue_t *q)
 static void cfq_completed_request(request_queue_t *q, struct request *rq)
 {
 	struct cfq_rq *crq = RQ_DATA(rq);
+	struct cfq_queue *cfqq;
 
 	if (unlikely(!blk_fs_request(rq)))
 		return;
 
-	if (crq->in_flight) {
-		struct cfq_queue *cfqq = crq->cfq_queue;
+	cfqq = crq->cfq_queue;
 
+	if (crq->in_flight) {
 		WARN_ON(!cfqq->in_flight);
 		cfqq->in_flight--;
-
-		cfq_account_completion(cfqq, crq);
 	}
 
+	cfq_account_completion(cfqq, crq);
 }
 
 static struct request *

drivers/char/watchdog/i8xx_tco.c

 /*
- *	i8xx_tco 0.06:	TCO timer driver for i8xx chipsets
+ *	i8xx_tco 0.07:	TCO timer driver for i8xx chipsets
  *
  *	(c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved.
  *				http://www.kernelconcepts.de
@@ -22,11 +22,22 @@
  *
  *	The TCO timer is implemented in the following I/O controller hubs:
  *	(See the intel documentation on http://developer.intel.com.)
- *	82801AA & 82801AB  chip : document number 290655-003, 290677-004,
- *	82801BA & 82801BAM chip : document number 290687-002, 298242-005,
- *	82801CA & 82801CAM chip : document number 290716-001, 290718-001,
- *	82801DB & 82801E   chip : document number 290744-001, 273599-001,
- *	82801EB & 82801ER  chip : document number 252516-001
+ *	82801AA  (ICH)    : document number 290655-003, 290677-014,
+ *	82801AB  (ICHO)   : document number 290655-003, 290677-014,
+ *	82801BA  (ICH2)   : document number 290687-002, 298242-027,
+ *	82801BAM (ICH2-M) : document number 290687-002, 298242-027,
+ *	82801CA  (ICH3-S) : document number 290733-003, 290739-013,
+ *	82801CAM (ICH3-M) : document number 290716-001, 290718-007,
+ *	82801DB  (ICH4)   : document number 290744-001, 290745-020,
+ *	82801DBM (ICH4-M) : document number 252337-001, 252663-005,
+ *	82801E   (C-ICH)  : document number 273599-001, 273645-002,
+ *	82801EB  (ICH5)   : document number 252516-001, 252517-003,
+ *	82801ER  (ICH5R)  : document number 252516-001, 252517-003,
+ *	82801FB  (ICH6)   : document number 301473-002, 301474-007,
+ *	82801FR  (ICH6R)  : document number 301473-002, 301474-007,
+ *	82801FBM (ICH6-M) : document number 301473-002, 301474-007,
+ *	82801FW  (ICH6W)  : document number 301473-001, 301474-007,
+ *	82801FRW (ICH6RW) : document number 301473-001, 301474-007
  *
  *  20000710 Nils Faerber
  *	Initial Version 0.01
@@ -49,6 +60,9 @@
  *  20030921 Wim Van Sebroeck <wim@iguana.be>
  *	0.06 change i810_margin to heartbeat, use module_param,
  *	     added notify system support, renamed module to i8xx_tco.
+ *  20050128 Wim Van Sebroeck <wim@iguana.be>
+ *	0.07 Added support for the ICH4-M, ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW
+ *	     chipsets. Also added support for the "undocumented" ICH7 chipset.
  */
 
 /*
@@ -73,7 +87,7 @@
 #include "i8xx_tco.h"
 
 /* Module and version information */
-#define TCO_VERSION "0.06"
+#define TCO_VERSION "0.07"
 #define TCO_MODULE_NAME "i8xx TCO timer"
 #define TCO_DRIVER_NAME   TCO_MODULE_NAME ", v" TCO_VERSION
 #define PFX TCO_MODULE_NAME ": "
@@ -360,8 +374,14 @@ static struct pci_device_id i8xx_tco_pci_tbl[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE (pci, i8xx_tco_pci_tbl);

drivers/scsi/libata-scsi.c

@@ -282,7 +282,8 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat)
 	/* No immediate match */
 	if(err)
 		printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err);
-	
+
+	i = 0;
 	/* Fall back to interpreting status bits */
 	while(stat_table[i][0] != 0xFF)
 	{

drivers/serial/s3c2410.c

@@ -744,11 +744,12 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	unsigned long flags;
 	unsigned int baud, quot;
 	unsigned int ulcon;
+	unsigned int umcon;
 
 	/*
 	 * We don't support modem control lines.
 	 */
-	termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
+	termios->c_cflag &= ~(HUPCL | CMSPAR);
 	termios->c_cflag |= CLOCAL;
 
 	/*
@@ -806,8 +807,10 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	if (termios->c_cflag & CSTOPB)
 		ulcon |= S3C2410_LCON_STOPB;
 
+	umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
+
 	if (termios->c_cflag & PARENB) {
-		if (!(termios->c_cflag & PARODD))
+		if (termios->c_cflag & PARODD)
 			ulcon |= S3C2410_LCON_PODD;
 		else
 			ulcon |= S3C2410_LCON_PEVEN;
@@ -821,6 +824,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 	wr_regl(port, S3C2410_ULCON, ulcon);
 	wr_regl(port, S3C2410_UBRDIV, quot);
+	wr_regl(port, S3C2410_UMCON, umcon);
 
 	dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
 	    rd_regl(port, S3C2410_ULCON),

include/asm-arm/arch-lh7a40x/memory.h

@@ -31,6 +31,8 @@
 
 #ifdef CONFIG_DISCONTIGMEM
 
+#define NODES_SHIFT	4	/* Up to 16 nodes */
+
 /*
  * Given a kernel address, find the home node of the underlying memory.
  */

include/asm-arm/arch-s3c2410/io.h

@@ -65,12 +65,9 @@ static inline unsigned sz __in##fnsuffix (unsigned int port)		\
 	return (unsigned sz)value;					\
 }
 
-static inline unsigned int __ioaddr (unsigned int port)
+static inline void __iomem *__ioaddr (unsigned int port)
 {
-	if (__PORT_PCIO(port))
-		return (unsigned int)(PCIO_BASE + (port));
-	else
-		return (unsigned int)(0 + (port));
+	return (void __iomem *)(__PORT_PCIO(port) ? PCIO_BASE + port : port);
 }
 
 #define DECLARE_IO(sz,fnsuffix,instr)	\
@@ -170,7 +167,7 @@ DECLARE_IO(int,l,"")
 	result;								\
 })
 
-#define __ioaddrc(port)	(__PORT_PCIO((port)) ? PCIO_BASE + ((port)) : ((port)))
+#define __ioaddrc(port)	((void __iomem *)(__PORT_PCIO(port) ? PCIO_BASE + (port) : (port)))
 
 #define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
 #define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))

include/asm-arm/arch-s3c2410/regs-serial.h

@@ -113,6 +113,9 @@
 				   S3C2410_UFCON_TXTRIG0  | \
 				   S3C2410_UFCON_RXTRIG8 )
 
+#define	S3C2410_UMCOM_AFC	  (1<<4)
+#define	S3C2410_UMCOM_RTS_LOW	  (1<<0)
+
 #define S3C2410_UFSTAT_TXFULL	  (1<<9)
 #define S3C2410_UFSTAT_RXFULL	  (1<<8)
 #define S3C2410_UFSTAT_TXMASK	  (15<<4)

include/asm-arm/numnodes.h

@@ -7,12 +7,17 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+/* This declaration for the size of the NUMA (CONFIG_DISCONTIGMEM)
+ * memory node table is the default.
+ *
+ * A good place to override this value is include/asm/arch/memory.h.
+ */
+
 #ifndef __ASM_ARM_NUMNODES_H
 #define __ASM_ARM_NUMNODES_H
 
-#ifdef CONFIG_ARCH_LH7A40X
-# define NODES_SHIFT	4	/* Max 16 nodes for the Sharp CPUs */
-#else
+#ifndef NODES_SHIFT
 # define NODES_SHIFT	2	/* Normally, Max 4 Nodes */
 #endif
 

include/asm-x86_64/numa.h

@@ -16,4 +16,6 @@ extern void numa_add_cpu(int cpu);
 extern void numa_init_array(void);
 extern int numa_off;
 
+#define NUMA_NO_NODE 0xff
+
 #endif