ARM: dts: stm32: Add missing pinctrl entries for STM32MP15

These pinctrl definitions will be used by Stinger96/IoTBox boards
from Shiratech.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

arch/arm/boot/dts/stm32mp15-pinctrl.dtsi

@@ -1598,6 +1598,30 @@ pins {
 		};
 	};
 
+	usart2_pins_b: usart2-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_b: usart2-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
 	usart3_pins_a: usart3-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
@@ -1637,6 +1661,19 @@ pins2 {
 		};
 	};
 
+	uart4_pins_c: uart4-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
 	uart7_pins_a: uart7-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
@@ -1652,6 +1689,19 @@ pins2 {
 		};
 	};
 
+	uart7_pins_b: uart7-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
 	uart8_pins_a: uart8-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
@@ -1726,4 +1776,18 @@ pins2 {
 			bias-disable;
 		};
 	};
+
+	spi4_pins_a: spi4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
+				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
+			bias-disable;
+		};
+	};
 };