[ALSA] aoa - Check value range in ctl callbacks

Check the value ranges in ctl put callbacks properly in aoa drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

sound/aoa/codecs/snd-aoa-codec-onyx.c

@@ -138,6 +138,13 @@ static int onyx_snd_vol_put(struct snd_kcontrol *kcontrol,
 	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 	s8 l, r;
 
+	if (ucontrol->value.integer.value[0] < -128 + VOLUME_RANGE_SHIFT ||
+	    ucontrol->value.integer.value[0] > -1 + VOLUME_RANGE_SHIFT)
+		return -EINVAL;
+	if (ucontrol->value.integer.value[1] < -128 + VOLUME_RANGE_SHIFT ||
+	    ucontrol->value.integer.value[1] > -1 + VOLUME_RANGE_SHIFT)
+		return -EINVAL;
+
 	mutex_lock(&onyx->mutex);
 	onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l);
 	onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r);
@@ -206,6 +213,9 @@ static int onyx_snd_inputgain_put(struct snd_kcontrol *kcontrol,
 	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 	u8 v, n;
 
+	if (ucontrol->value.integer.value[0] < 3 + INPUTGAIN_RANGE_SHIFT ||
+	    ucontrol->value.integer.value[0] > 28 + INPUTGAIN_RANGE_SHIFT)
+		return -EINVAL;
 	mutex_lock(&onyx->mutex);
 	onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
 	n = v;
@@ -272,6 +282,8 @@ static void onyx_set_capture_source(struct onyx *onyx, int mic)
 static int onyx_snd_capture_source_put(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
+	if (ucontrol->value.enumerated.item[0] > 1)
+		return -EINVAL;
 	onyx_set_capture_source(snd_kcontrol_chip(kcontrol),
 				ucontrol->value.enumerated.item[0]);
 	return 1;

sound/aoa/codecs/snd-aoa-codec-tas.c

@@ -248,6 +248,13 @@ static int tas_snd_vol_put(struct snd_kcontrol *kcontrol,
 {
 	struct tas *tas = snd_kcontrol_chip(kcontrol);
 
+	if (ucontrol->value.integer.value[0] < 0 ||
+	    ucontrol->value.integer.value[0] > 177)
+		return -EINVAL;
+	if (ucontrol->value.integer.value[1] < 0 ||
+	    ucontrol->value.integer.value[1] > 177)
+		return -EINVAL;
+
 	mutex_lock(&tas->mtx);
 	if (tas->cached_volume_l == ucontrol->value.integer.value[0]
 	 && tas->cached_volume_r == ucontrol->value.integer.value[1]) {
@@ -401,6 +408,10 @@ static int tas_snd_drc_range_put(struct snd_kcontrol *kcontrol,
 {
 	struct tas *tas = snd_kcontrol_chip(kcontrol);
 
+	if (ucontrol->value.integer.value[0] < 0 ||
+	    ucontrol->value.integer.value[0] > TAS3004_DRC_MAX)
+		return -EINVAL;
+
 	mutex_lock(&tas->mtx);
 	if (tas->drc_range == ucontrol->value.integer.value[0]) {
 		mutex_unlock(&tas->mtx);
@@ -447,7 +458,7 @@ static int tas_snd_drc_switch_put(struct snd_kcontrol *kcontrol,
 		return 0;
 	}
 
-	tas->drc_enabled = ucontrol->value.integer.value[0];
+	tas->drc_enabled = !!ucontrol->value.integer.value[0];
 	if (tas->hw_enabled)
 		tas3004_set_drc(tas);
 	mutex_unlock(&tas->mtx);
@@ -494,6 +505,8 @@ static int tas_snd_capture_source_put(struct snd_kcontrol *kcontrol,
 	struct tas *tas = snd_kcontrol_chip(kcontrol);
 	int oldacr;
 
+	if (ucontrol->value.enumerated.item[0] > 1)
+		return -EINVAL;
 	mutex_lock(&tas->mtx);
 	oldacr = tas->acr;
 
@@ -562,6 +575,9 @@ static int tas_snd_treble_put(struct snd_kcontrol *kcontrol,
 {
 	struct tas *tas = snd_kcontrol_chip(kcontrol);
 
+	if (ucontrol->value.integer.value[0] < TAS3004_TREBLE_MIN ||
+	    ucontrol->value.integer.value[0] > TAS3004_TREBLE_MAX)
+		return -EINVAL;
 	mutex_lock(&tas->mtx);
 	if (tas->treble == ucontrol->value.integer.value[0]) {
 		mutex_unlock(&tas->mtx);
@@ -610,6 +626,9 @@ static int tas_snd_bass_put(struct snd_kcontrol *kcontrol,
 {
 	struct tas *tas = snd_kcontrol_chip(kcontrol);
 
+	if (ucontrol->value.integer.value[0] < TAS3004_BASS_MIN ||
+	    ucontrol->value.integer.value[0] > TAS3004_BASS_MAX)
+		return -EINVAL;
 	mutex_lock(&tas->mtx);
 	if (tas->bass == ucontrol->value.integer.value[0]) {
 		mutex_unlock(&tas->mtx);

sound/aoa/fabrics/snd-aoa-fabric-layout.c

@@ -600,7 +600,7 @@ static int n##_control_put(struct snd_kcontrol *kcontrol,		\
 	struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol);	\
 	if (gpio->methods && gpio->methods->get_##n)			\
 		gpio->methods->set_##n(gpio,				\
-			ucontrol->value.integer.value[0]);		\
+			!!ucontrol->value.integer.value[0]);		\
 	return 1;							\
 }									\
 static struct snd_kcontrol_new n##_ctl = {				\