Commit 49b3f874 authored by Lukas Wunner's avatar Lukas Wunner Committed by Jonathan Cameron

drivers: misc: ti_dac7512: Remove duplicate driver

The Texas Instruments DAC7512 has the exact same pinout, programming
interface and power-down modes as the Texas Instruments DAC121S101 and
Analog Devices AD5320, which are already supported by the IIO driver
ad5446.c.  Remove the duplicate misc driver.

This requires user space to migrate to the standardized IIO sysfs ABI.
(In other words, it needs to change a filename.)

The IIO driver supports the chip's features more fully, e.g. the ability
to power down the output or choose one of the available powerdown modes.

There is an oddity with the misc driver in that it initializes the SPI
slave to SPI_MODE_0, in contradiction to the datasheet which specifies
that data is latched in on the falling edge, implying that SPI_MODE_1
or SPI_MODE_2 must be used.  Another oddity is that Kconfig and the
MODULE_DESCRIPTION() claim the chip has 16-bit resolution although it
actually has 12-bit.

Datasheets:
http://www.ti.com/lit/ds/symlink/dac7512.pdf
http://www.ti.com/lit/ds/symlink/dac121s101.pdf
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5320.pdfSigned-off-by: default avatarLukas Wunner <lukas@wunner.de>
Acked-by: default avatarDaniel Mack <daniel@zonque.org>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 9cad3b98
...@@ -219,7 +219,8 @@ CONFIG_AD525X_DPOT_I2C=m ...@@ -219,7 +219,8 @@ CONFIG_AD525X_DPOT_I2C=m
CONFIG_ICS932S401=m CONFIG_ICS932S401=m
CONFIG_APDS9802ALS=m CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m CONFIG_ISL29003=m
CONFIG_TI_DAC7512=m CONFIG_IIO=m
CONFIG_AD5446=m
CONFIG_EEPROM_AT24=m CONFIG_EEPROM_AT24=m
CONFIG_SENSORS_LIS3_SPI=m CONFIG_SENSORS_LIS3_SPI=m
CONFIG_IDE=m CONFIG_IDE=m
......
...@@ -37,7 +37,8 @@ CONFIG_MTD_NAND_PXA3xx=y ...@@ -37,7 +37,8 @@ CONFIG_MTD_NAND_PXA3xx=y
CONFIG_MTD_UBI=y CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP=y
CONFIG_ISL29003=y CONFIG_ISL29003=y
CONFIG_TI_DAC7512=y CONFIG_IIO=y
CONFIG_AD5446=y
CONFIG_SCSI=y CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SG=y
......
...@@ -463,10 +463,19 @@ static const struct spi_device_id ad5446_spi_ids[] = { ...@@ -463,10 +463,19 @@ static const struct spi_device_id ad5446_spi_ids[] = {
{"dac081s101", ID_AD5300}, /* compatible Texas Instruments chips */ {"dac081s101", ID_AD5300}, /* compatible Texas Instruments chips */
{"dac101s101", ID_AD5310}, {"dac101s101", ID_AD5310},
{"dac121s101", ID_AD5320}, {"dac121s101", ID_AD5320},
{"dac7512", ID_AD5320},
{} {}
}; };
MODULE_DEVICE_TABLE(spi, ad5446_spi_ids); MODULE_DEVICE_TABLE(spi, ad5446_spi_ids);
#ifdef CONFIG_OF
static const struct of_device_id ad5446_of_ids[] = {
{ .compatible = "ti,dac7512" },
{ }
};
MODULE_DEVICE_TABLE(of, ad5446_of_ids);
#endif
static int ad5446_spi_probe(struct spi_device *spi) static int ad5446_spi_probe(struct spi_device *spi)
{ {
const struct spi_device_id *id = spi_get_device_id(spi); const struct spi_device_id *id = spi_get_device_id(spi);
...@@ -483,6 +492,7 @@ static int ad5446_spi_remove(struct spi_device *spi) ...@@ -483,6 +492,7 @@ static int ad5446_spi_remove(struct spi_device *spi)
static struct spi_driver ad5446_spi_driver = { static struct spi_driver ad5446_spi_driver = {
.driver = { .driver = {
.name = "ad5446", .name = "ad5446",
.of_match_table = of_match_ptr(ad5446_of_ids),
}, },
.probe = ad5446_spi_probe, .probe = ad5446_spi_probe,
.remove = ad5446_spi_remove, .remove = ad5446_spi_remove,
......
...@@ -393,16 +393,6 @@ config SPEAR13XX_PCIE_GADGET ...@@ -393,16 +393,6 @@ config SPEAR13XX_PCIE_GADGET
entry will be created for that controller. User can use these entry will be created for that controller. User can use these
sysfs node to configure PCIe EP as per his requirements. sysfs node to configure PCIe EP as per his requirements.
config TI_DAC7512
tristate "Texas Instruments DAC7512"
depends on SPI && SYSFS
help
If you say yes here you get support for the Texas Instruments
DAC7512 16-bit digital-to-analog converter.
This driver can also be built as a module. If so, the module
will be called ti_dac7512.
config VMWARE_BALLOON config VMWARE_BALLOON
tristate "VMware Balloon Driver" tristate "VMware Balloon Driver"
depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST
......
...@@ -30,7 +30,6 @@ obj-$(CONFIG_ISL29003) += isl29003.o ...@@ -30,7 +30,6 @@ obj-$(CONFIG_ISL29003) += isl29003.o
obj-$(CONFIG_ISL29020) += isl29020.o obj-$(CONFIG_ISL29020) += isl29020.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
obj-$(CONFIG_DS1682) += ds1682.o obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_TI_DAC7512) += ti_dac7512.o
obj-$(CONFIG_C2PORT) += c2port/ obj-$(CONFIG_C2PORT) += c2port/
obj-$(CONFIG_HMC6352) += hmc6352.o obj-$(CONFIG_HMC6352) += hmc6352.o
obj-y += eeprom/ obj-y += eeprom/
......
/*
* dac7512.c - Linux kernel module for
* Texas Instruments DAC7512
*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/of.h>
static ssize_t dac7512_store_val(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct spi_device *spi = to_spi_device(dev);
unsigned char tmp[2];
unsigned long val;
int ret;
ret = kstrtoul(buf, 10, &val);
if (ret)
return ret;
tmp[0] = val >> 8;
tmp[1] = val & 0xff;
spi_write(spi, tmp, sizeof(tmp));
return count;
}
static DEVICE_ATTR(value, S_IWUSR, NULL, dac7512_store_val);
static struct attribute *dac7512_attributes[] = {
&dev_attr_value.attr,
NULL
};
static const struct attribute_group dac7512_attr_group = {
.attrs = dac7512_attributes,
};
static int dac7512_probe(struct spi_device *spi)
{
int ret;
spi->bits_per_word = 8;
spi->mode = SPI_MODE_0;
ret = spi_setup(spi);
if (ret < 0)
return ret;
return sysfs_create_group(&spi->dev.kobj, &dac7512_attr_group);
}
static int dac7512_remove(struct spi_device *spi)
{
sysfs_remove_group(&spi->dev.kobj, &dac7512_attr_group);
return 0;
}
static const struct spi_device_id dac7512_id_table[] = {
{ "dac7512", 0 },
{ }
};
MODULE_DEVICE_TABLE(spi, dac7512_id_table);
#ifdef CONFIG_OF
static const struct of_device_id dac7512_of_match[] = {
{ .compatible = "ti,dac7512", },
{ }
};
MODULE_DEVICE_TABLE(of, dac7512_of_match);
#endif
static struct spi_driver dac7512_driver = {
.driver = {
.name = "dac7512",
.of_match_table = of_match_ptr(dac7512_of_match),
},
.probe = dac7512_probe,
.remove = dac7512_remove,
.id_table = dac7512_id_table,
};
module_spi_driver(dac7512_driver);
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
MODULE_DESCRIPTION("DAC7512 16-bit DAC");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment