Commit 49e41938 authored by Tyler Baker's avatar Tyler Baker Committed by Kevin Hilman

ARM: multi_v7_defconfig: fix failure setting CPU voltage by enabling dependent I2C controller

This patch fixes a long standing issue introduced during the 3.16 merge window.
Shortly after the merge, exynos5250-based arndale boards began to produce the
following errors:

kern.err kernel:  exynos-cpufreq exynos-cpufreq: failed to set cpu voltage
kern.err kernel:  cpufreq: __target_index: Failed to change cpu frequency: -22

Further analysis revealed that the S5M8767 voltage regulator used on the
exynos5250-based arndale board utilizes the S3C2410 I2C controller. If the
S3C2410 I2C controller driver is not enabled, the S5M8767 voltage regulator
fails to probe. Therefore a dependency exists between these two drivers.
In the exynos_defconfig both CONFIG_REGULATOR_S5M8767 and CONFIG_I2C_S3C2410
options are enabled, and no errors are produced. However, in the
multi_v7_defconfig only the CONFIG_REGULATOR_S5M8767 option is enabled and the
errors are present. So let's enable the CONFIG_I2C_S3C2410 option in the
multi_v7_defconfig to allow the S5M8767 voltage regulator to probe.
Signed-off-by: default avatarTyler Baker <tyler.baker@linaro.org>
Acked-by: default avatarKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: default avatarKevin Hilman <khilman@linaro.org>
parent 4a8ab771
...@@ -217,6 +217,7 @@ CONFIG_I2C_CADENCE=y ...@@ -217,6 +217,7 @@ CONFIG_I2C_CADENCE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_EXYNOS5=y CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_MV64XXX=y CONFIG_I2C_MV64XXX=y
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SIRF=y CONFIG_I2C_SIRF=y
CONFIG_I2C_TEGRA=y CONFIG_I2C_TEGRA=y
CONFIG_I2C_ST=y CONFIG_I2C_ST=y
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment