Commit 49f7a471 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

net: bcmgenet: Properly configure PHY to ignore interrupt

By the time we execute bcmgenet_mii_probe(), the MDIO bus structure has
long been allocated and registered. Overirring the PHY interrupt using
the MDIO bus structure has no chance to work anymore, because
of_mdiobus_register() has call phy_device_create() for use, which copied
the MDIO bus address's irq for the PHY into the PHY device "irq" member.

Since we do have a proper reference to a PHY device in
bcmgenet_mii_probe(), just assign the desired IRQ value here.

Fixes: aa09677c ("net: bcmgenet: add MDIO routines")
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent deccd16f
...@@ -401,7 +401,7 @@ int bcmgenet_mii_probe(struct net_device *dev) ...@@ -401,7 +401,7 @@ int bcmgenet_mii_probe(struct net_device *dev)
* Ethernet MAC ISRs * Ethernet MAC ISRs
*/ */
if (priv->internal_phy) if (priv->internal_phy)
priv->mii_bus->irq[phydev->mdio.addr] = PHY_IGNORE_INTERRUPT; priv->phydev->irq = PHY_IGNORE_INTERRUPT;
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment