[media] mmp-camera: Don't power up the sensor on resume

We still need to power up the controller to avoid unsightly self-immolation
should something try to access its registers, but the sensor can stay
powered down unless the camera was actually operating at suspend time.
This gets rid of the camera LED flash on resume, fixing OLPC bug #11644.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/marvell-ccic/mmp-driver.c

@@ -106,6 +106,13 @@ static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev)
 /*
  * Power control.
  */
+static void mmpcam_power_up_ctlr(struct mmp_camera *cam)
+{
+	iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR);
+	iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR);
+	mdelay(1);
+}
+
 static void mmpcam_power_up(struct mcam_camera *mcam)
 {
 	struct mmp_camera *cam = mcam_to_cam(mcam);
@@ -113,9 +120,7 @@ static void mmpcam_power_up(struct mcam_camera *mcam)
 /*
  * Turn on power and clocks to the controller.
  */
-	iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR);
-	iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR);
-	mdelay(1);
+	mmpcam_power_up_ctlr(cam);
 /*
  * Provide power to the sensor.
  */
@@ -335,7 +340,7 @@ static int mmpcam_resume(struct platform_device *pdev)
 	 * touch a register even if nothing was active before; trust
 	 * me, it's better this way.
 	 */
-	mmpcam_power_up(&cam->mcam);
+	mmpcam_power_up_ctlr(cam);
 	return mccic_resume(&cam->mcam);
 }