ARM: dts: imx7d-sdb: Restore pwm backlight support

This was removed in commit 5eaeaccd ("ARM: dts: imx7d-sdb: Pass
'enable-gpios' and 'power-supply' properties") with a note claiming that
GPIO1_IO01 is connected to a pin labeled as "PWREN" on the connector.

Despite that label this pin does actually work as a PWM controlling
brightness. So restore pwm functionality.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx7d-sdb.dts

@@ -108,10 +108,17 @@ reg_can2_3v3: regulator-can2-3v3 {
 		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
 	panel {
 		compatible = "innolux,at043tn24";
-		pinctrl-0 = <&pinctrl_backlight>;
-		enable-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
 		power-supply = <&reg_lcd_3v3>;
 
 		port {
@@ -704,6 +711,12 @@ MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
 	};
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
 &iomuxc_lpsr {
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
@@ -711,9 +724,9 @@ MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B		0x74
 		>;
 	};
 
-	pinctrl_backlight: backlightgrp {
+	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1		0x110b0
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x30
 		>;
 	};
 };